直接斜率波前复原算法的控制效果分析

建立自适应光学系统功率谱抑制函数的概念，分析了采用直接斜率波前复原算法的自适应当光学系统的控制效果，理论分析与６１单元自适应光学系统上的实验结果表明，直接斜率波前复原算法将导致控制效果下降。     

Fast parallel Preconditioned Conjugate Gradient algorithms for robot manipulator dynamics simulation

In this paper fast parallel Preconditioned Conjugate Gradient (PCG) algorithms for robot manipulator forward dynamics, or dynamic simulation, problem are presented. By exploiting the inherent structure of the forward dynamics problem, suitable preconditioners are devised to accelerate the iterations. Also, based on the choice of preconditioners, a modified dynamic formulation is used to speedup both serial and parallel computation of each iteration. The implementation of the parallel algorithms on two interconnected processor arrays is discussed and their computation and communication complexities are analyzed. The simulation results for a Puma Arm are presented to illustrate the effectiveness of the proposed preconditioners. With a faster convergence due to preconditioning and a faster computation of iterations due to parallelization, the developed parallel PCG algorithms represent the fastest alternative for parallel computation of the problem withO(n) processors.     

A design and analysis of objective function-based unsupervised neural networks for fuzzy clustering

Fuzzy clustering has played an important role in solving many problems. In this paper, we design an unsupervised neural network model based on a fuzzy objective function, called OFUNN. The learning rule for the OFUNN model is a result of the formal derivation by the gradient descent method of a fuzzy objective function. The performance of the cluster analysis algorithm is often evaluated by counting the number of crisp clustering errors. However, the number of clustering errors alone is not a reliable and consistent measure for the performance of clustering, especially in the case of input data with fuzzy boundaries. We introduce two measures to evaluate the performance of the fuzzy clustering algorithm. The clustering results on three data sets, Iris data and two artificial data sets, are analyzed using the proposed measures. They show that OFUNN is very competitive in terms of speed and accuracy compared to the fuzzy c-means algorithm.     

Dynamic analysis of the NPP pressure sensor system

The aim of the work was to develop on-line methods of control and diagnostics of pressure sensors at a NPP. The analysis was carried out along two lines:

1. i) The detection system including the sensor itself was modeled theoretically to obtain and study its transfer function, and to establish correspondence between the spectral characteristics of the pressure signal.

2. ii) The numerical processing of the signal using the AR technique to reconstruct the transfer function and evaluate the system's response, to a step impulse, as well as the spectral analysis. The hydraulic model presented indicate that the spectral lines observed at 10 Hz are due to longitu-dinal oscillations of water in the system branches, while the response time of the detection system is effectively the time of signal retardation in the porous ceramic diaphragms of the δ-cell of the sensor itself.

     

一种降低电离层梯度影响的Hatch滤波算法

目前,地基增强系统（Ground-Based Augment System,GBAS）中的主要问题是：尽管使用载波平滑降低了伪距噪,利用差分技术消除了用户和基准站间的大部分共同误差,从而减少了差分改正值中的误差。但是电离层时间梯度和空间梯度于这两个过程中产生了额外的误差,阻碍了差分改正值质量的进一步提高。基于对电离层时间和空间梯度引起的额外误差的分析,并考虑平滑伪距噪声,文章提出了一种新的Hatch滤波方法,该滤波器的时间常数是随卫星仰角、电离层时间和空间梯度以及用户与参考站之间的距离而实时变化的。该方法降低了差分改正值误差,提高了定位精度。并且通过差分定位仿真并对比传统的单频Hatch滤波方法,发现使用该方法后,减小了差分校正值的误差。     

制丝线FT651型叶片垂直分片机控制系统的改进方案

针对叶片垂直分片机使用过程中出现的劈坏烟箱、纵向移动刀架失控和系统无报警功能等问题,分析故障产生的原因,并对其控制系统进行改进。     

基于中值滤波和梯度锐化的边缘检测

实现一种基于中值滤波和梯度锐化的边缘检测方法。首先采用既能过滤噪声又能保护边缘信息的中值滤波对图像进行平滑处理。然后采用梯度锐化加强边缘像素强度,通过简单的二值化获得图像的初始边缘,系统采用连通区域标记的方法去除位于图像封闭边界内的残留黑块。最后通过实验结果与人工提取的结果比较,进行误差分析,找出本文算法的不足之处,以便对该算法进行改进。实践证明,本文的边缘检测方法对含有噪声点且灰度分布比较均匀的图像有很好的效果。     

基于横纵向联合控制的多目标优化车辆跟驰研究

为解决车辆在拥堵环境中因车速波动较大所带来的跟驰平稳性较差、跟踪无效或不安全等问题,提出了基于车辆模型和深度强化学习的多目标优化跟驰方案。首先基于车辆横纵向动力学建立车辆跟驰模型,然后根据车间距误差、速度误差、横向偏差及相对偏航角等,利用深度确定性策略梯度算法得到跟驰车的加速度和转向角,以更平稳安全地控制跟驰车辆。经NGSIM公开驾驶数据集进行测试与验证,该方案可有效地提升跟驰车辆的稳定、舒适与安全性,对保证交通安全和提升道路通行能力具有重要意义。     

液压支架工作状态模糊识别系统研究

针对目前综采工作面液压支架压力监测系统只能监测综采工作面压力,不能对液压支架工作状态进行识别的问题,设计了一种液压支架工作状态模糊识别系统。该系统可对现有的综采工作面液压支架压力监测系统监测到的压力数据进行模糊识别,根据模糊识别输出值即可判断液压支架的5种工作状态,即降架、移架、升架、增阻、卸压保持;当液压支架处于增阻工作状态且增阻时间过长时,该系统可及时通知液压支架操作工增大液压支架压力,辅助实现顶煤破碎。测试结果验证了该系统的可行性。     

四辊铝箔轧机预控参数在线整定

介绍Ф210mm/Ф500mm× 800mm四辊液压轧机厚度预控系统中采用人机界面实现参数在线调整的方法,能大大提高预控参数的控制精度,减少轧机产品的厚度误差,是厚度自动控制的一项创新.