PVC生产中的二次水回收工艺改造

介绍了在PVC生产过程中产生的蒸汽冷凝水、压滤水、废自来水、母液水的回收和综合利用的情况。工艺改进后,青岛海晶化工集团有限公司12万t/a PVC装置可节水67万t/a,节约资金204万元/a。     

Cellulose membranes for reverse osmosis Part I. RO cellulose acetate membranes including a composite with polypropylene

With the aim of obtaining RO membranes for brackish water desalination from purified celluloses (cotton linters and bleached bagasse pulp), two reactions (heterogeneous and homogeneous) were applied for the synthesis of cellulose acetate (CA). The efficiency of the membranes was measured and compared with those prepared from purchased CA and prepared CA by acetylation of imported high-grade viscose wood pulp. The effect of blending CA with polypropylene (PP), on the efficiency of the prepared RO membranes was also studied. Results showed that the method of preparation of CA plays a profound effect on the salt rejection and water flux of the RO membranes. The efficiencies of RO membranes formed from heterogeneously acetylated celluloses are higher than those prepared from homogeneous ones. Blending the acetylated cellulose with 9% PP wastes improves the efficiency of membranes prepared from the homogeneously acetylated celluloses.     

Ozone Treatment of Surface Water to Provide High Quality Cooling Water and Process Water

The characteristic feature of this cooling tower water treatment is the intermittent addition of ozone for several days.     

外加电流阴极保护在海水冷却槽中的应用

论述了金属的电化学腐蚀和外加电流阴极保护原理。说明对以海水为介质的冷却、冷凝设备,采用外加电流阴极保护是防止设备腐蚀的有效方法。举例说明了应用效果。     

Inhibition effect of some polymers on the corrosion of cadmium in a hydrochloric acid solution

The effects of poly(vinyl alcohol) (PVA), poly(acrylic acid) (PAA), sodium polyacrylate (NaPA), poly(ethylene glycol) (PEG), pectin (P), and carboxymethyl cellulose (CMC) on the corrosion of cadmium in a 0.5M hydrochloric acid (HCl) solution were studied with both electrochemical impedance spectroscopy and Tafel plot techniques. Measurements were carried out at cathodic, open‐circuit, and anodic potentials. All the investigated polymers had inhibitory effects on both the cathodic (except for NaPA, P, and CMC) and anodic processes, with a predominant anodic inhibiting action. However, NaPA, P, and CMC exhibited a slight cathodic inhibiting action only at higher polymer concentrations. This behavior may be attributed to the very weak adsorbability of the polymers on the cathodic sites. Because PVA and PEG had hydroxy groups, there could be bridging between the polymer and the surface, resulting in an inhibiting effect in the HCl solution. However, PVA had much greater adsorbability on the surface than PEG at the anodic potential. The adsorption of most of the polymers obeyed a Temkin adsorption isotherm, and this indicated indicating that the main process of inhibition was adsorption. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 866–871, 2003     

模数对无机富锌涂料和涂层性能的影响

硅酸钾富锌涂料是目前广泛使用的钢铁防腐蚀涂料。作为涂料粘结剂的高模数硅酸钾溶液对涂料和涂层的性能有重要影响。本研究考察了硅酸钾粘结剂的模数变化对涂料及涂层性能产生的影响。实验结果表明：粘结剂模数的提高可以提高固化后涂层的耐水性能，当粘结剂模数在5.0左右时，所得富锌涂层具有最佳的耐磨性能，但当粘结剂模数超过5.5时会造成涂料施工性能和贮存稳定性下降，涂层柔韧性降低，从而降低涂层的耐磨性能。     

新型高效水处理剂的研制

本文简单介绍了2－丙烯酰胺－2－甲基丙磺酸（AMPS）的性能及应用，工业循环冷动水处理中阻垢剂的发展历史与最新进展。并首次以马来酸酐（MA）、AMPS、NaH2PO2为单体，水为溶剂、过硫酸氨为引发剂合成低磷含量的膦羧酸共调聚物，探讨了单体配比为n(MA):n(AMPS)=2:1,m(NaH2PO2):m(MA AMPS)=10:100时反应温度，反应时间对合成产品的影响。     

Hybrid systems in seawater desalination—practical design aspects, present status and development perspectives

Ever since seawater desalination has been applied on an industrial scale, and particular in the countries of the Arabian Gulf, the application of desalination processes in dual-purpose facilities—water and power—as a hybrid configuration has been discussed in many feasibility investigations and also planning concepts. It is above all the combination of reverse osmosis with thermal processes that has found increasing interest with the aim of ensuring, as economically as possible, uniform water supplies under the specific, greatly varying load conditions in the Gulf countries. Such design concepts for hybrid configurations encompass straightforward structures with a low degree of coupling between membrane and thermal desalination processes, but range up to very complex configurations with strong interconnections on both the water side and thermally, as well as with several desalination processes connected in series or in parallel. Classical hybrid concepts in which the permeate from an RO desalination component is mixed with distillate from thermal desalination have already been implemented in Saudi Arabian dual-purpose plants, like Jeddah and Yanbu-Medina. Although hybrid systems of greater complexity have been addressed in many design studies and publications, up to now none has been brought to fruition. Coming into consideration asthe design basis for determining the capacity shares of the various desalination processes operated in a hybrid configuration are: arrangement of thermal cycle of the power plant component; water/power ratio of the dual-purpose seawater desalination and power plant; provision of undiminished water production of the desalination plant as electricity generation varies; provision of a specified drinking water quality with regard to composition and salt content; combination of all these aspects. Also gaining in importance are concerns of environmental pollution and sustainable development when selecting seawater desalination and power plant configurations, as well as their optimization when considering desalination and electricity generation as a whole. In the practical design of hybrid membrane and thermal systems, aspects come to light, though, that restrict linking of the two systems and joint utilization of facilities, as conceived in studies and conceptual design investigations. This applies both for common utilization of intakes and the use of heated up cooling water from thermal processes as a feed stream for the RO part of the desalination process. Additionally, requirements of drinking water composition, particularly chloride content, TDS and compliance with a specific residual content of boron, influence specifically the design of the membrane process part and its share in the total desalination capacity. Such practical aspects have greatly influenced the design and configuration of the Fujairah hybrid plant for which, from a total desalination capacity of 100 MIGD (454,600 m³/d), the share of 37.5 MIGD (170,500 m³/d) makes its seawater RO plant the biggest currently being constructed anywhere in the world. From the findings of the engineering of this plant and the idea that, by increasing interconnection between the two processes on the water side, it is possible to advance a hybrid configuration of this type with regard to cost optimization in the membrane installation, but also by joint utilization of the intake equipment, perspectives result for applied research efforts over the near and long terms, for example: long-term behavior of membranes at elevated temperatures; tendency for biofouling in membrane process with common utilization of cooling water and brine; influences of such interconnections on the overall availability of the facility. But also for the operation and maintenance organization of such large facilities, consequences can be foreseen for the future development of hybrid plants, particularly for operation management and organisation of the interplay of the different power plant and desalination systems, monitoring of SWRO membrane replacement and cleaning, as well as controlling water quality.     

中国古代陶瓷饮水杯盏形态演变的因素

在人类生存、发展的历史进程中,作为饮水用具的陶瓷杯盏经历了从无到有、由简单到复杂、由粗糙到精致的嬗变过程,而这一过程在很大程度上受到陶瓷生产技术、人们的饮水方式及审美情趣的变化等因素的影响。     

循环冷却水零排污运行方案的研究

对循环冷却水系统零排污的技术可行性、经济性等进行了讨论，并针对大庆炼化公司循环冷却水系统零排污方案的实施加以详细描述，对实施过程中存在的问题予以了详细说明。