Adhesive bonding of stainless steel water tubing

The use of an adhesive to bond stainless steel water tubing, allowing stainless steel fittings to be employed, is considered and compared with the more conventional use of compression or capillary copper fittings together with a soft solder. Tests carried out to determine environmental effects on adhesively bonded stainless steel tubing suitable for domestic water supply, and the strengths of these joints, are described. It has been found that acrylic anaerobic adhesives are suitable for bonding tubing carrying cold water, the joints attaining superior strength to the copper-soldered ones; a reasonable degree of flexing can also be tolerated. It would appear that certain selected adhesives may also be used in joints carrying hot water.     

新型气化炉煤气洗涤废水生物脱氮的研究

在实验室,采用SBR生化反应器,分别研究了经空气吹脱预处理和未经预处理的新型气化炉煤气洗涤废水经驯化建立的生态系统脱除氨态氮和COD以及脱氮模式的区别,得出以下结论:新型气化炉煤气洗涤废水可采用短程亚硝化型硝化形式直接进行生化处理。     

Solubility of Na2SO4, Na2CO3 and their mixture in supercritical water

The solubility of many salts in water decreases dramatically with temperature in the vicinity of the critical point of pure water. Examples of these salts are sulfates of sodium, potassium, lithium and sodium carbonate. These salts are usually produced during supercritical water oxidation (SCWO) and contribute to fouling. The solubility of Na₂CO₃ and Na₂SO₄ has been determined in pure form and in the presence of each other, for the temperature range relevant to SCWO. The experimental procedure was to pass the salt solution through a tube at constant temperature. After a brief initiation period during which no salt sticks to the tube, the salt above the solubility limit deposited on the tube surface. The solution leaving the section was thus at the solubility limit. A rapid decrease in the salt solubility was observed just above the pseudo-critical temperature. For supercritical conditions, the solubility of each salt in the form of a mixture was quite close to the solubility of pure salt. At the highest fluid density considered (480 kg/m³) the presence of Na₂CO₃ reduces the solubility of Na₂SO₄, as might be expected from the “common-ion effect”.     

脱水法合成3-羟基丁酸乙酯

以3-羟基丁酸和乙醇为原料，在对甲苯磺酸的催化下分别以氧化钙、3A分子筛、无水硫酸镁为脱水剂，采用索氏提取器进行回流脱水合成3-羟基丁酸乙酯。对影响3-羟基丁酸乙酯收率的诸因素进行了考察。试验结果表明：加入脱水剂和带水剂可以显著提高3-羟基丁酸乙酯的收率。当原料配比为：0．1mol 3-羟基丁酸、0．12mol乙醇，0．7175g对甲苯磺酸，带水剂环己烷50mL，脱水剂18．7g氧化钙，反应时间3h时，产品3-羟基丁酸乙酯的收率可达96．6％(质量分数，下同)。     

COD测定方法的研究动态

从采用不同的氧化剂测定、寻找新的催化剂、样品消解方法的改进、在线监测仪器及与其他综合指标的相关关系等几个方面论述了化学需氧量测定方法的发展与研究现状.     

SE-I型混凝剂在水处理中的应用

利用透射电镜和微孔滤膜超滤法研究了SE -I和PAC混凝剂的结构形貌和相对分子质量分布情况 ;比较了SE -I和PAC混凝处理油田含油废水、煤矿矿井废水和水库水的效果。实验结果表明 ,SE -I较PAC具有更大的枝化度和相对分子质量 ,体现在水处理效果上是SE -I较PAC有更好的除油、除浊、去除COD和脱色效果。SE -I型混凝剂是一种高效水处理剂     

从精苯酸焦油废液中提取水泥减水剂的研究

研究了从精苯焦油废液中提取水泥减水剂的工艺过程．系统地分析了提取产品的各项物性指标．应用试验表明．对水泥的减水率达２０％．同时水泥的抗折强度和抗压强度均有所提高．由此可以看出该提取物是一种优良的水泥减水剂．     

沥青带水磺化工艺的研究

通过沥青磺化过程的主反应和副反应，进一步讨论了磺化工艺的原理，磺化试剂的选择，溶剂的组成，带水速度，溶剂的回收方式等各种因素对产品质量的影响。     

氨合成塔催化剂中毒原因分析及处理

介绍合成塔催化剂因合成气压缩机段间水冷器泄漏而致水中毒的情况，分析水中毒的原因及处理过程，介绍了段间水冷器泄漏情况下装置的运行方案。     

Diffuse reflectance fourier transform infrared spectroscopy of phospholipid adsorption onto silicic acid

Diffuse reflectance Fourier transform infrared spectroscopy was used to study the mode of adsorption of phosphatidylcholine (PC) in hexane onto silicic acid (SA). PC adsorption was mainly through the charged phosphate group with minimal binding through the ester carbonyl. When the SA surface with adsorbed PC is washed with hexane, containing a small concentration of isopropanol, the desorbed PC is recovered without structural change, i.e., there is no evidence of PC hydrolysis in the adsorption process. Adsorbent misture probably promotes PC adsorption due to the increased availability of surface water hydroxyl groups for interaction with the PC phosphate groups. Isopropanol promoted PC binding by destabilizing PC reverse miscelles in solution, thus promoting its adsorption.