富集纯化三七皂甙Rb_3方法的研究

研究了丙酮直接结晶法,正丁醇萃取法,HPD-100型药用大孔吸附树脂对三七皂甙Rb3的精制作用,并对它们的效果及可行性进行比较,主要从上样量,纯化效果进行优化,确定了用大孔吸附树脂是工业上的最佳条件。     

橡胶模具发展概观

首先概述了橡胶模具的分类和基本概况，分析了橡胶模具的独有特点。随后分析了橡胶模具的加工技术、选用材质、表面处理、模具污染及模具清洗等情况。着重介绍了橡胶模具的材质及清洗方式的选择和使用状况。最后总结了橡胶模具发展应注意的一些问题。     

聚合硅酸铝铁絮凝剂的研究动态

概要评述了国内外聚合硅酸铝铁盐类混凝剂的研究动态。分析了各种制法的特点，对今后的研究工作提出了一些建议。     

新型颗粒状活性染料

本文阐述了颗粒状活性染料的制造特点、制造技术和品质评价，并列举了典型的商品。     

Fatty acid variation among U.S. Runner-type peanut cultivars

Fatty acid composition was determined among seven U.S. runner-type peanut (Arachis hypogaea L.) cultivars: Florunner, Sunrunner, GK-7, Southern Runner, Sunbelt Runner, Okrun, and Langley. Significant year and cultivar differences were found within these fatty acid profiles. Southern Runner had the best oleic to linoleic ratio and iodine values; whereas Florunner, Sunrunner, and Langley were the highest in unsaturated and lowest in saturated and long-chain fatty acids. For the future, breeding programs need to continue developing peanut cultivars with improved oil quality.     

Preparation of water‐repellent silks by a reaction with octadecenylsuccinic anhydride

Silk fibers and membranes were acylated with octadecenylsuccinic anhydride (ODSA) at 75°C for different times. Swelling [N,N‐dimethylformamide (DMF) and dimethyl sulfoxide (DMSO)] and nonswelling (xylene) solvent media were used for the reaction. Silk membranes that reacted in DMF or DMSO displayed faster reaction kinetics and attained higher weight‐gain values than fibers. The effect of the solvent on the reaction yield was in the following order: DMSO > DMF ? xylene. The Fourier transform infrared spectra of acylated silk samples showed the characteristic absorption bands of the anhydride at 2990, 2852, 1780–1700, and 1170 cm^?1. The intensity of the latter band, which increased linearly with the weight gain, was used as a marker for evaluating the reaction kinetics of the samples acylated in the nonswelling medium. The moisture regain and water retention of silk fibers acylated with ODSA decreased significantly, regardless of the solvent system used. Accordingly, the water repellency increased. Acylation induced an increase in the thermal stability of the silk fibers and membranes. Fine particles adhering to the surfaces of the silk fibers acylated in xylene were detected by scanning electron microscopy. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 324–332, 2003     

多孔TiO2陶瓷光催化剂降解糠醛废水

以钛酸四丁酯等为原料，采用简单工艺制得多孔TiO2陶瓷光催化剂；并研究了利用多孔TiO2陶瓷光催化降解糠醛废水。结果表明，在紫外灯下照射60min，糖醛废水的COD去除率可达59．8％，而通入空气有利于污染物的去除。     

超临界水中氧化钙催化泥炭制氢

使用间歇式超临界水反应器,以氧化钙作为催化剂和CO_2化学固定剂,详细考察了Ca/C摩尔比、反应温度、停留时间、压力等条件对泥炭在超临界水中转化制氢的影响。在873 K,Ca/C比为0.61时,CO_2几乎被完全固定,在气相产物中只有氢气、甲烷和低碳烃,碳转化率由未添加CaO时的66.6％提高到82.4％,氢气的产率由2.2 mmol·g~(-1)提高到6.9 mmol·g~(-1)。当反应温度由773 K提高到923 K时,泥炭的裂解反应加剧,气体产物的收率由5.5 mmol·g~(-1)提高到19.5 mmol·g~(-1),但是氢气所占比例由55.4％下降到34.8％。与温度相比,压力和在终温停留时间的影响相对较小。     

Surface modification of tetrafluoroethylene–perfluoroalkyl vinylether copolymer (PFA) by plasmas for copper metallization

Tetrafluoroethylene–perfluoroalkyl vinylether copolymer (PFA) sheet surfaces were modified with argon, helium, oxygen, and hydrogen plasmas. How the four plasmas modified the PFA sheet surfaces was investigated. All plasmas modified the PFA surfaces and at the same time initiated degradation of the PFA polymer chains. The balance between modification and degradation was strongly influenced by the magnitude of the discharge current in the plasmas. Efficiency of the plasmas in modification was hydrogen plasma > oxygen plasma > argon plasma > helium plasma. The modification involved defluorination of CF₂ carbons into CHF and CH₂ carbons and oxidation into O? CH₂, O? CHF, and O? CF₂ groups. The surface‐modification technique (a combination of hydrogen plasma treatment and silane coupling treatment) proposed in this study was applied for copper metallization of the PFA surface. The utility of the technique was confirmed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1087–1097, 2002     

尾煤泥水煤浆高效制浆工艺在临涣选煤厂的应用

分析了临涣选煤厂浮选尾煤的性质及成浆性。为了把高粘性尾煤泥滤饼制备成水煤浆，研制了循环剪切桶和剪切泵。实践证明，浮选尾煤泥可以制备出浓度高、稳定时间长和流变性好的水煤浆。研制的制浆设备结构紧凑、电耗低、效率高。笔者介绍了该设备的结构、工作原理以及制浆生产线。