95W-Ni-Fe 合金工艺缺陷的 SAM 和 XPS 分析

藉助扫描俄歇探针、Ｘ射线光电子谱等分析了９５Ｗ－Ｎｉ－Ｆｅ合金碳污染和氧化的本质。发现，碳污染试样中碳的化学状态主要为石墨，少量为铁或镍的有机化合物，这些物质的界面富集使材料脆化。钨合金氧化后，氧大量富集于钨／粘结相界面，使沿着该界面的断裂更容易发生。     

改善高平均功率固体激光器光束质量的研究

本文首先概述了内含热透镜的激光谐振腔的分析方法，提出影响高平均功率固体激光器光束质量的主要因素是激光介质的热效应，尤其是非对称的热透镜象差。因此，改善光束质量的途径是补偿或修正透镜象差，使光束质量达到非相干多模振荡的理论值。     

MALTING AND BREWING SCIENCE: CHALLENGES AND OPPORTUNITIES*,†

Molecular technologies have been developed for the transformation of barley. These technologies complement current methods of barley breeding. In addition, they offer the potential of altering specific components in barley that affect malting quality and of introducing foreign genes, controlling desirable traits, into barley. Application of genetic engineering to improving malt quality factors such as cell wall degradation, protein modification, starch hydrolysis and flavour stability, is discussed. Limitations to the use of this technology for improving malt-related functional properties of barley components such as cell walls and starch granules are also evaluated. Some possible constraints to the utilization of genetic engineering for malt quality improvements are identified.     

经纬仪竖盘检测新方法及综合检验仪

本文提出一种检定经纬仪竖直盘测角误差的新方法．该方法精度高，稳定性好，能直接与国家角度标准溯源．由它组成的“经纬仪综合检验仪”可以检测ＪＪＧ４１４—９４光学经纬仪检定规程中所有的项目及细分误差，其总不确定度为０．４″．被测仪器包括各种类型及精度的光学经纬仪、电子经纬仪、水准仪等．     

前向人工神经网络模型用于时间序列分析

介绍前向人工神经网络模型，并与传统的统计学线性模型进行比较。为了适应时间序列变量的特点，对逆传播模型进行了改进，并对太阳黑子活动的观察值这一典型的时间序列进行了分析，并检验了模型的预测能力，取得了较好的结果     

ZS1756振动筛动态分析

应用ＳＡＰ５Ｐ软件计算矿用振动筛前４０阶固有模态，从提高寿命观点看，第１阶，第３－４阶和第６阶模态应采取抑制措施；从队噪观点看，前６阶模态应给予注意。     

异型材挤出口模内的流动模拟

本文根据挤出机理，对口模内的流动行为进行适当的简化和假定，建立了挤出口模内流动分析的数学模型，并采用横截面／假想区域法实现了复杂异型材挤出口模内的数值模拟，数值分析结果与三维有限元解和解析解的对比，取得了满意的效果。     

橡胶挤出机平均温差分析与计算

从理论上推导挤出机平均温差的计算公式，并指出与一般换热器平均温差计算的异同。     

用潜坝对抚州市南区水厂取水口淤沙进行治理

多沙河流中的水厂取水口，枯水期经常存在淤沙，影响抽水。以往的治理方法多是采用丁坝群束水冲沙，但坝田淤高有碍行洪，对城市防洪不利．南区水厂采用潜坝方案，兼顾防洪．通航等要求，缩小治理范围，用十分简易的方法获得成功，且投资更省，值得在类似工程中推广运用．     

Prediction of fatigue behaviour in stress-concentrators of arbitrary geometry

A new method is outlined which aims to predict high-cycle fatigue behavior of components which fail from stress-concentrators. This involves examination of the stress field in the vicinity of the stress-concentrator, and comparison with stress fields for cracks at known stress intensities. Methods which are currently used for simple notch geometries can thus be generalised, making the approach applicable to stress concentrators of any geometry. The method of prediction is shown to be stable, providing a solution of good accuracy when compared to analytical methods for standard specimen geometries. Favourable comparisons with experimental data have been achieved both for standard notches and for a corner geometry which represents a typical component case.