提高涂层防腐性能评价技术的探讨

界面防腐技术是油气田三维大跨度的大型结构群体综合防护治理的主要方法之一，但我国现行的涂层检测方法还存在较大的局限性和失真度，不能反映实际工况下涂层的防护质量。文章指出了我国涂层与防护质量评价技术的现状和与国外的差距，介绍了80年代以来国外在涂层质量评价方面采用的一些新技术和先进的综合评价方法，最后提出了采用表面分析技术和电化学方法相结合的评价技术，以及对现行评价方法的再创造等建议。     

饮用水氯化中氯仿形成的动力学模式

以黄腐酸（ＦＡ）为卤仿前驱物质，分别测定不同投氯量、ＴＯＣ水平、温度以及ｐＨ值对ＣＨＣｌ３形成速率的影响，确定出ＣＨＣｌ３形成的动力学模式。该模式可用于预测投氯后的管网水中ＣＨＣｌ３的形成量，以便采取必要措施保证饮用水符合国家规定ＣＨＣｌ３〈６０μｇ／Ｌ的标准。     

Scattering of waves by flaws in anisotropic laminated plates

The strip element method (SEM) is used to investigate wave scattering by rectangular flaws in anisotropic laminated plates. The plates containing flaws are divided by junctions into domains in which the SEM is applied. For each domain, SEM equations are obtained which give a relationship between the traction and displacement vector on the vertical boundaries. A set of equations which gives a relationship between the traction and displacement vector on the junctions is then obtained by assembling the SEM equations for all the domains. This set of equations is solved by using the conditions on the junctions. Scattered wave fields in the frequency domain for isotropic and composite plates with rectangular flaws are computed and discussed in comparison with results for corresponding plates without flaws. A technique for determining the length of a rectangular flaw in a plate is also presented. The results presented in this paper are of importance and could be used in the characterization of flaws in anisotropic laminated plates.     

用纤维TiO2作光催化剂降解饮用水中腐殖质

用纤维状ＴｉＯ２作为光催化剂，采用间歇和连续两种操作方式，在Ｏ３／ＴｉＯ２／ＵＶ体系中处理含腐殖质的饮用水，使腐殖质去除率在９７％，纤维ＴｉＯ２可过滤回收，易于实际应用。     

APPLICATION OF A COMMERCIAL ENZYME PREPARATION IN THE BARLEY MALTING PROCESS

This paper presents data on barley micromalting with addition of the CELLUCLAST enzyme complex. This is a commercial, multicarbohydrase with distinct β-glucanase and proteinase activities. The enzyme was added to steeping and germination phases, in different quantities (0.05%; 0.75% and 0.1% of initial barley). The enzyme was added to different malting phases: to the 2nd and 3rd steep water, at the beginning of germination on the 1st day by spraying, on the 2nd day of germination and in combination of addition to 3rd steeping water and in germination start (50% of total quantity of each). CELLUCLAST enzyme had a significant effect on reduction of wort viscosity, extract difference, wort filterability and protein breakdown, depending on the quantity of added enzyme and the malting phase to which it was added. There was no negative effect on other malt quality parameters. The best values of cytolytic breakdown parameters (viscosity, extract difference, filtration rate) were obtained with addition of 0.075% of CELLUCLAST, on the first day of germination.     

A comparative study of color measurement lntstrumentation

A multiplant Quality Improvement Team [QIT] was firmed to develop and implement an evaluation program for various color measurement .systems as potential replacements for the then-current aging systems. The emphasis qf this article is the analytical methodology utilized to evaluate the various color systems. The evaluation program consisted cf two phases. Phase I was a general overview/review of several systems, while Phase II was an extensive internal comparative evaluation measurement systems. These were Milton-Roy's ColorMate HDS, HunterLab's Ultrascan, Datacolor's CS-5, and BYK-Gardner's The Color Sphere [TCS]. The main comparison criteria were interinstrument agreement [agreement between two instruments ofthe same system], user-friendly software and computer interface capability, vendor amenability to a long-term logistical and maintenance relationship, and price. All systems were evaluated by duplicate measurements on various color tiles, yarns, and polymer flakes-over 1600 measurements on each system. The systems were compared with an instrument matrix, a decision matrix, and a product matrix. The instrument matrix was a comparison qfinstrument parameters, software/math treatments, and economics. The decision matrix was a forced ranking of each system by each criteria category [1–4 scale, with 1 representing the best and 4 representing the worst]. The product matrix accentuated the relative importance ofone criterion category over another by multiplying the forced ranking by the criticality of the category. The criticality of a given category wus determined by consensus within the QIT. Thr combination qf the three matrices allowed the evaluator[.s] t o select the color rneasuremmt system that best satixfied the color measurement needs and requirements of their facility and their products. For this evaluation, all ofthe evaluated systems were superior to the then-current agingsystems. As a result of this methodology, one instrument emerged as clearly superior. © 1994 John Wrley & Sons, Inc.     

对聚合物驱单井效果评价的几点认识

通过对喇嘛甸油田聚合物驱单井效果分析，给出了采油井阶段效果评价方法，即单井见效时间和含水回升时间早晚的确定方法，单井见效时间取决于油层条件，注聚前含油饱和度及累计采出地下体积倍数，单井含水回升时间主要取决于聚驱阶段剩余储量采出程度，根据单井阶段评价结果，对试验区进行跟踪调整，在单井阶段效果评价的基础上，对单井最终效果采用吨聚增油量和聚驱阶段剩余储量采收率来进行客观，有效的评价，对聚驱产量预测具有一定指导意义。     

羊皮服装革的弯曲应力松弛性能及其与(手感)弹性之关系研究

本文研究了羊皮服装革的弯曲应力衰减性能。对应力衰减常数（αｂ）及其与羊皮服装革手感弹性的关系进行了讨论。结果表明：αｂ与革的手感弹性相关。αｂ值定量反映出革的手感弹性优劣。     

Hydrogen and Calcium Ion Concentrations Affect Volume of CO2 Puffed Diced Green Bell Peppers

Diced green bell peppers were soaked in a solution of hydrochloric acid or calcium chloride, air-dried to 50% moisture, held in CO₂ at 5.8 MPa for 1, 3 or 5 min, and puffed by abruptly releasing the CO₂ pressure. Treatment with 1% CaCl₂ increased the size of puffed-dried products as compared to a control; however, HCl treatments did not. The treatment with 1 or 2% CaCl₂ reduced shrinkage as compared to the control. The 1% CaCl₂ treatment may have increased the CO₂ saturation rate.