Influence of water and accelerated aging on the shear fracture properties of glass/epoxy composite

The degradation of interlaminar shear strength and shear fracture toughness of glass/epoxy composites due to uptake of distilled water and sea water has been studied. The composites were immersed in water for up to eight months at temperatures up to 70 °C. Unreinforced matrix resin samples were also immersed for periods up to 2 years. Sea water was absorbed less rapidly than distilled water. Weight gains below 1% did not influence the shear strength while higher weight gains reduced shear strength up to 25%. The loss in apparent interlaminar shear strength was uniquely related to specimen weight gain. Mode II fracture toughness, G _IIc, also decreased with increasing immersion time after an initial incubation period, but the accelerated tests were found to reduce G _IIc less than the room temperature tests at comparable weight gains.     

Monitoring water quality in reservoirs with IRS-1A-LISS-I

An attempt has been made to quantify the relationship between the variation in IRS-IA-LISS-I (Indian Remote Sensing Satellite-1A Linear Imaging Self-Scanning System) radiance data and field measured change in secchi disc depth. Secchi disc depth was measured for 47 predetermined sampling locations on reservoir surface water. At extinction depth (secchi depth), water samples were collected from all the sampling locations. Suspended sediments of eight locations representing various reaches of the reservoir were selected for mineralogical, particle size and optical properties analysis. The LISS-I radiance value in band 1 (0.45–0.52µm) band 2 (0-52–0.59 µm) and band 3 (0.62–0.68 µm) were used in a regression analysis. The absorption infrared band 4 (0.77–0.86 µm) was not included in the analysis. In these, the dependable variable was secchi depth (SD) and the LISS-I-radiance data was the estimator variable. Forty-seven data sets of 20 October 1988 from Tawa reservoir surface water were used to obtain an estimator equation for SD. The verification of the estimator equation was tested by applying it to a data set of 21 measurements of 28 September 1988 for this reservoir. The coefficient of correlation between observed and estimated values for the 28 September 1988 data set wasr=0.92 for SD, indicating that the equation could accurately predict the water clarity (SD) for this reservoir on new occasions from IRS-IA-LISS-I spectral data. It is shown that mineral composition and optical properties of suspended sediments influence the reflected radiance of water quality. It is concluded that IRS-IA-LISS-I data provide a useful means of mapping water quality in reservoir.     

Enrichment of slightly concentrated tritiated water by electrolysis using a palladium cathode coated on ionic solid polymer membrane—Design and results

In nuclear installations, tritiated water is generally produced in the process of detritiation of air circulating in the glove boxes. The goal of this work concerns enrichment of this tritiated water at low concentration by electrolysis. The choice of this electrolyzer was dictated by the passivity of selected materials to the radiolysis in low-level tritiated water and the selectivity of the method avoiding further elimination of tritiated water and moisture before release in environment. According to the results, it is feasible to treat non-negligible volume of low-level tritiated water using a cathodic palladium membrane coated on an ionic solid polymer membrane. Presence of a palladium black deposit on the palladium membrane improves effectiveness. Enrichment in tritiated water depends on the isotopic separation factor, thereby the current and the permeability values.     

大型透平式压缩机检修质量控制

介绍了6000空分制氧设备中大型透平式压缩机的检修过程中应着重注意的几个问题，主要检修项目的质量控制，以及检修技巧。     

石化行业污水回用途径的可行性分析

随着石化行业污水回用技术的成熟,污水回用途径成了制约污水回用的瓶颈。通过对各种回用水途径的可操作性比较,筛选出最佳途径,并通过现场试验,从技术、经济、可操作性方面论证,认为石化污水回用于工业循环冷却水场作为补充水确实可行。     

A structure/function study of polyaminoamide dendrimers as silica scale growth inhibitors

Dendrimers have attracted immense attention during the last decade due to their interesting properties both from a basic and an applied research viewpoint. Encapsulation of metal nanoparticles for catalysis, drug delivery and light harvesting are only some applications of dendrimers that are breaking new ground. A novel application of dendrimer technology is described in the present paper that relates to industrial water treatment. Industrial water systems often suffer from undesirable inorganic deposits. These can form either in the bulk or on metallic surfaces, such as heat exchangers or pipelines. Silica (SiO₂) scale formation and deposition is a major problem in high‐silica‐containing cooling waters. Scale prevention rather than removal is highly desired. In this paper, benchtop screening tests on various silica inhibition chemistries are reported, with emphasis on materials with a dendrimeric structure. Specifically, the inhibition properties of commercially available STARBURST^® polyaminoamide (PAMAM) dendrimers generations 0.5, 1, 1.5, 2, and 2.5 are investigated in detail together with other commonly‐used scale inhibitors. Experimental results show that inhibition efficiency largely depends on structural features of PAMAM dendrimers such as generation number and nature of the end groups. PAMAM dendrimers are effective inhibitors of silica scale growth at 40 ppm dosage levels. PAMAM dendrimers also act as silica nucleators, forming SiO₂–PAMAM composites. This occurs because the SiO₂ formed by incomplete inhibition interacts with cationic PAMAM‐1 and ‐2. The general scope of silica formation and inhibition in industrial waters is also discussed. Copyright © 2005 Society of Chemical Industry     

Analysis of low load transients for the Vandellòs-II NPP: Application to operation and control support

The Technical University of Catalonia (UPC) has been jointly working with the Asociación Nuclear Ascó-Vandellòs (ANAV) for a number of years in order to establish, qualify and use best estimate (BE) models for the reactors under the control of ANAV. ANAV is the consortium that is responsible for operation of the Ascó and Vandellòs-II reactors. The reactors are Westinghouse-design three-loop PWRs with an approximate electrical power of 1000 MW. The existing integral plant models for each plant are currently used for many different purposes among which are support of plant operation and control. Quite a number of studies have been done in order to improve both safety and plant competitiveness. Most of these dynamic analyses were carried out in relation to transients starting at nominal full power or at least, very close to full power. This paper develops a specific use of the Vandellòs-II plant model for operation and control support at low power involving new ranges of system actuation parameters. It also examines scenarios that are somewhat different from those typically analysed. The study starts showing the results of an assessment case, which is a start-up test and provides some additional qualification, and subsequently attempts to establish calculations to support both an improvement in feed water controls and to set up operating recommendations for low-load manual operation of feed water turbo-pump. Both results hopefully, will produce an outcome, which leads to an improvement in safety and reduces reactor trip probability.     

红钢炼钢转炉除尘水系统水处理的应用

从分析炼钢转炉除尘水系统的工艺特征及水质特点，结合红钢在转炉除尘水系统水处理的成功应用案例，论述了目前转炉除尘水化学水处理的原理、方法、过程控制（水质控制）标准、整个烟道各个运行参数控制合理值，循环回用带来效益及投资回报，具有重要应用意义和推广价值。     

压力容器材料质量控制的几个重要环节

针对压力容器材料方面存在的问题,从设计、采购、检验、制造等环节进行了分析,根据实际情况确定材料的质量控制要点。材料使用前要通过各种检测手段,判断材料的真实性,确保所用材料合格;并应从设计、选材、采购、计划、填报内容和选择可靠的供应方等方面加以控制,确保材料的正确使用,为压力容器产品的材料控制提供借鉴。     

铝塑复合板用铝带材工艺控制要点简析

铝塑复合板用铝带材是我公司的主要产品。本文主要介绍该产品实际生产中遇到的主要问题（板形、表面质量、折弯性能）及相应的解决措施。