A generalized equation for surface tension from the triple point to the critical point

A three-parameter generalized equation is proposed for surface tension from the triple point to the critical point. This equation not only fits the data well but also is good for interpolation between the normal boiling point and the critical point. This equation is also good for extrapolation to the triple point. This equation has been tested using the surface tension of water from the triple point to the critical point. The constants of this equation obtained using orthobaric surface tensions are given for a number of compounds. The isobaric surface tensions determined at a pressure of 1 atm do not differ significantly from the orthobaric surface tensions. Such data also have been used in obtaining equations from the triple to the critical point.Nomenclature T _c Critical temperature, K - T _t Triple point, K - T _m Melting point, K - T _r Reduced temperature, K - X (T _c-T)/T _c - Surface tension, dyne · cm^–1;10^–3N · m^–1 - _m Surface tension at the melting point - _f Surface tension at T _r=0.9 - _t Surface tension at the triple point - Relative deviation 100[ _obsd– _calcd]/ _obsd - Standard deviation [( _obsd– _calcd)²/(No. points—No. parameters)]^0.5     

一种简便的饮用水除铀方法及其机理

本文介绍一种利用原水中含有的无机盐,加入廉价的化学试剂除去饮用水中微量铀的简便方法。并对其除铀机理进行了探讨,证明除铀主要是以软化水过程中产生的氢氧化镁表面吸附共沉淀机理进行的。     

基于滤波的SAR影像去噪方法分析

根据SAR(Synthetic Aperture Radar)影像相干噪声的特点,对现在广泛应用的各种抑制噪声的滤波方法如均值滤波、Frost滤波、增强型Lee滤波、Lee滤波、中值滤波等进行分析,并提出适合本研究区影像的基于小波变换的分量滤波处理去噪方法,利用均值、标准差、平滑指数、PM值、信息熵和平均梯度等评价指标对各种滤波去噪后的影像质量进行评价,并对去噪效果进行对比分析,证明本文所采用的滤波方法对SAR影像噪声有很好的抑制作用,并且较好的保存了图像纹理信息。     

Directions for improving manual fire suppression using a physically based computer simulation

The Swedish Fire Research Board and the U.S. Federal Emergency Management Agency are sponsoring a project to further the understanding of the basic mechanisms involved, as well as to support the development of standards for and to seek ways of improving the performance of portable fire suppression systems used by fire departments.This paper describes a physically based computer model developed to simulate one aspect of the problem: the manual suppression of postflashover fires. This includes: (1) an overview of the physical basis behind the model; (2) a comparison of model predictions with available experimental data, and (3) an analysis of fire suppression effectiveness using the model.The analysis concludes that, when direct access and extinguishment of the burning fuel is not possible, improved fire control occurs with water sprays having a Rosin-Rammler distribution of droplet sizes with volume-median-drop diameters in the 0.15 to 0.35 mm range. This agrees with available experimental data. It is also shown that fire fighting venting and standoff distance requirements may lead to more severe fires requiring more water for control; although venting and water spray induced air/gas flow also serve to channel hot steam and gases away from the fire fighter adding to his safety. The analysis also shows that allowing higher gas and surface temperatures at fire control through improved fire fighter protective clothing and equipment design reduces water flow rate requirements. Additional experimental work is recommended before all these conclusions are considered definitive. Reference: L. M. Pietrzak and G. A. Johanson, Directions for Improving Manual Fire Suppression Using a Physically Based Computer Simulation,Fire Technology, Vol. 22, No. 3, August, 1986, p. 184.     

Water table fluctuation with a random initial condition

The nonlinear Boussinesq equation is used to understand water table fluctuations in various ditch drainage problems. An approximate solution of this equation with a random initial condition and deterministic boundary conditions, recharge rate and aquifer parameters has been developed to predict a transient water table in a ditch-drainage system. The effects of uncertainty in the initial condition on the water table are illustrated with the help of a synthetic example. These results would find applications in ditch-drainage design.Notation A / tanh t - a lower value of the random variable representing the initial water table height at the mid point - a+b Upper value of the random variable representing the initial water table height at the midpoint - B tanh t - C 4/ - h variable water table height - h mean of the variable water table height - h _m variable water table height at the mid point - h _m mean of the variable water table height at the mid point - K hydraulic conductivity - L half spacing between the ditches - m ₀ initial water table height at the mid point - N Uniform rate of recharge - S specific yield - t time of observation - x distance measured from the ditch boundary - (4/SL)(NK)^1/2 - (L/4)(N/K)^1/2 - dummy integral variable     

防止会计信息失真 提高会计信息质量

指出会计信息是决策者进行决策的重要依据之一,因此,会计信息的质量,直接关系到决策者的决策及其后续效果.而会计信息失真,将引起投资决策失误和社会经济资源的无效配置.笔者分析了产生会计信息失真的原因及其影响,提出了一些提高会计信息质量的防范措施.     

车身曲面的光顺品质分析与应用

文章对车身反求工程中曲面光顺的含义、常用光顺检查方法( 曲面曲率法、光照模型法、等高线法、线性变换法)的特点及原理进行论述;介绍CATIA软件Freestyle模块的外形分析功能的使用,其目的是在图形终端屏幕上直观分析曲面光顺品质,满足用户对产品外形的视觉要求,给汽车外观赋予浓郁的时代感.     

Novel technology of purification of copper electrolyte

The effects of arsenic with different valence states on the purification of copper electrolyte were studied and a novel technology of purification of copper electrolyte by copper arsenite was proposed. The results show that the purification performance of As（Ⅲ） compounds is better than that of As（Ⅴ） compounds. The purification technology by copper arsenite has the advantages of simple operation, high purification performance and low cost in comparison with other technologies and its appropriate purification conditions are that copper arsenite concentration is 18 g/L, reaction temperature is 65 ℃ and reaction time is 8 h. The removal rates of Sb and Bi are 53.22% and 58.67% respectively under these conditions. The purification principle show that a kind of yellow precipitate mainly composed of arsenic, antimony （ Ⅴ ）, bismuth and oxygen forms in electrolyte after copper arsenite is added, and consequently antimony and bismuth are removed from electrolyte.     

Ultrasonic-assisted drilling of Inconel 738-LC

Generally in the drilling of modern aviation materials such as nickel and titanium base super alloys, problems frequently occur in terms of burr formation at the cutter exit, tool stress, high heat generation on tool surface as well as low process reliability. A recent and promising method to overcome these technological constraints is the use of ultrasonic assistance, where high-frequency and low-amplitude vibrations are superimposed on the movement of cutting tools. This paper presents the design of an ultrasonically vibrated tool holder and the experimental investigation of ultrasonically assisted drilling of Inconel 738-LC. The circularity, cylindricity, surface roughness and hole oversize of the ultrasonically and conventionally drilled workpieces were measured and compared. The obtained results show that the application of ultrasonic vibration can improve the hole quality considerably. Improvements of up to 60% have been achieved.     

饮用水中天然有机物的分析与表征方法

天然有机物(NOM)是一类分布广泛、成分复杂的有机混合物,可严重影响饮用水的处理效率,并可能对出水水质产生严重的不利影响。因此,为了改进和优化饮用水的处理过程,在研究和实际应用阶段对NOM进行表征和定量以了解其结构特性和反应性具有重要意义。文中先对NOM的富集方法进行了介绍,接着梳理了不同分离方法的依据及作用,最后总结了各类表征方法的原理及应用,以期有助于对NOM和饮用水处理的深入研究。