地表水质监测模型中的几种人工智能方法

重点对地表水质预测模型的几种人工智能方法进行了评述,具体说明了BP神经网络水质预测模型、地表水COD灰色预测模型、时间数列预测方法及WASP5模型系统等方法的原理和特点.并提出地表水质预测模型WASP5与GIS系统集成的趋势,建立水质自动监测系统是我国水质现状和社会发展的需要,并分析了发展水质自动检测系统的方法及可行性.     

Longitudinal and temporal water temperature patterns in the Yangtze River and its influence on spawning of the Chinese sturgeon (Acipenser sinensis Gray 1835)

In this study, water temperature longitudinal and temporal patterns were investigated in four locations of the Yangtze River to identify their influence on spawning of the Chinese sturgeon (Acipenser sinensis Gray 1835). The results showed that, historically (1960–1980), the four locations, Pingshan (PS, 2,687 river kilometres [rkm]), Yichang (YC, 1,640 rkm), Chenglingji (CLJ, 1,265 rkm), and Hukou (HK, 805 rkm), all had similar average annual water temperatures (around 18.0 °C) but very different amplitudes: The upper two locations, PS (11.4–23.2 °C) and YC (9.1–25.9 °C), were relatively stable and had smaller amplitude than the lower two ones, CLJ (6.0–30.0 °C) and HK (5.9–30.8 °C). On the basis of the physiological effects for Chinese sturgeon, we defined three water temperature ranges: stressing (>23 °C), holding (23–20 °C), and spawning (20–16 °C). We found that the upper two locations with successful spawning of the Chinese sturgeon (PS and YC) had short or no stressing period but long holding and spawning periods. Currently (2013–2016), the impoundment of the Three Gorges Reservoir increases the time for water temperature decreasing to 20 °C at the current spawning ground (YC) in autumn, which increases the stressing and holding periods, and has significant negative impact on the spawning of Chinese sturgeon. Nonetheless, considering the very high stressing temperature and the short duration of the holding and spawning periods at CLJ and HK, we propose that YC is still the most suitable spawning location for the Chinese sturgeon.     

聚酯酰胺热熔胶的合成及其性能研究

研究了以聚酯胶和聚酰胺胶为原料在催化剂作用下加热共熔,通过大分子链交换反应制备织物用聚酯酰胺热熔胶的方法。用聚酯胶的溶剂对所得产品进行溶取试验并且通过红外光谱分析都证明了链交换反应的存在。用该法所得产品粘接强度大,既耐水洗又耐干洗,适用于粘合衬生产。     

80%莠灭净水分散粒剂的配方

采用了挤压造粒的加工工艺对高含量莠灭净固化新剂型WG(水分散粒剂)进行了研制,尤其对该制剂中的润湿剂、悬浮分散剂、粘结剂和崩解剂的种类及用量进行了筛选,并对该制剂的润湿、崩解、悬浮等性能进行了检测,根据试验结果得到了由2%的烷基萘磺酸钠、4%的马来酸-丙烯酸共聚物钠盐、3%的聚乙烯吡咯烷酮、2.5%的可溶淀粉、83.3%的莠灭净原药(含量为96%)和适量膨润土等组成的较佳配方,该产品的悬浮率在90%以上,崩解时间在1min以内,在(54±2)℃下贮存4周后的分解率小于5%,各项性能指标均符合水分散粒剂的要求。     

硫氰酸钠法高吸湿(水)腈纶纺丝工艺及其性能的研究

采用丙烯酸和丙烯腈的共聚物与聚丙烯腈共混纺丝的方法,纺制了丙烯酸改性的聚丙烯腈纤维,研究了纺丝工艺条件与改性腈纶性能之间的关系。实验结果表明:随着共混纺丝所采用的丙烯酸共聚物的共聚比的增加,改性腈纶的断裂强度有所下降,吸湿性和保水性则不断提高;采用低温干燥致密化和较低的总拉伸倍数,有利于提高改性纤维的吸湿和保水性能;随着纤度的增大,改性腈纶的回潮率和保水率渐渐减小。     

脱酮肟型有机硅建筑密封胶的研制

本文介绍了脱酮肟型有机硅建筑密封胶的配制原理、工艺、产品性能及其影响因素     

离子交换膜间水的电离及其应用

本文通过分析纯水的电离,讨论了普通电渗析(ED)和填充床电渗析(EDI)中水的电离现象及其相关 机理。EDI过程中水电离产生的H+和OH-离子可以自再生离子交换树脂。文中简单介绍了已得到产业化的EDI 技术和正在推广中的离子交换树脂的电再生技术。     

Moisture Distribution and Dewatering Efficiency for Wet Materials

This review paper summarizes current research efforts toward a comprehensive view of wet material dewatering, considering the binding energy as the strength to hold water, and rupture energy given to remove moisture from materials.     

Controlled release of insecticide carbaryl from sodium alginate,sodium alginate/gelatin,and sodium alginate/sodium carboxymethyl cellulose blend beads crosslinked with glutaraldehyde

Interpenetrating network polymeric beads of sodium alginate (NaAlg) and its blend with gelatin (gels) or sodium carboxymethyl cellulose (NaCMC) have been prepared by crosslinking with a common crosslinking agent, glutaraldehyde (GA), for the release of insecticide carbaryl (Carb). The prepared beads were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. Scanning electron microscopy confirmed the spherical nature and surface morphology of the particles. Bead characteristics, such as carbaryl entrapment efficiency, particle size, equilibrium swelling degree, and carbaryl release kinetics, were determined. The effects of the preparation conditions, such as Carb/NaAlg ratio, time of exposure to GA, blend ratio, and temperature of release medium on the carbaryl release, were investigated for 25 days at 25°C. It was observed that the carbaryl release decreased with increase in crosslinking of network, while it increased with increase in Carb/NaAlg ratio and temperature. The release of carbaryl also increased with increase in Gel or NaCMC content in the blend beads. The highest carbaryl release was found to be 100%, for the beads that were prepared with 1 : 1 NaAlg/Gel at 16 days. The diffusion coefficients have been calculated for the transport of insecticide through the polymeric beads, using initial time approximation method. These values were also consistent with the carbaryl release data. The carbaryl release from most of the bead formulations followed the Fickian trend. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1310–1319, 2006