Effect of test frequency and water content on localized crack-tip heating in nylon-6,6

Fatigue crack propagation (FCP) tests were conducted at various frequencies on nylon-6,6 specimens equilibrated over a range of moisture levels to determine the crack growth rates and the crack-tip temperatures as a function of water content. Frequency-sensitivity was correlated with the amount of crack-tip heating taking place, with crack-tip temperature being found to depend strongly on the estimated loss compliance, D″, of the material. The frequency-sensitivity of FCP in nylon was seen also to be affected by mean stress, suggesting that creep processes are often significant in FCP of nylon.     

中央空调的水处理

本文扼要介绍了中央空调循环冷却水和冷冻水系统中常见的问题及其原因,并对冷却水和冷冻水的处理程序作了初步的阐述.     

呼和浩特石化公司凝结水回收改造工程总结

本文主要对呼和浩特石化公司凝结水回收系统改造前的状况、采取的改造措施及改造后的效果进行了总结，并就今后可能的改造作了预测分析。     

Modification of leather properties by grafting. I. Effect of monomer chain on the physico‐mechanical properties of grafted leather

Although leather has a number of desirable properties such as thermal stability and fire retardancey, in addition to high toughness, it has a few drawbacks such as weight, high water absorption, poor soil and rot resistance, and nonuniformity. If these defects are overcome, leather's usefulness would be further enhanced and its competitive position with respect to synthetics would increase. This study reports the physical and mechanical properties of buffalo leather after chemical graft copolymerization with ethyl acrylate, butyl acrylate, and 2‐ethyl hexyl acrylate using benzoyl peroxide as an initiator. The optimum conditions for grafting (e.g., monomer and initiator concentrations, temperature and time of grafting, and solvent leather ratio) were extensively investigated. The study achieved outstanding properties for buffalo leather in reduction of water uptake after grafting, especially on using 2‐ethyl hexyl acrylate and butyl acrylate monomers. FT‐IR and solid ¹³C‐NMR for leather before and after grafting confirmed the grafting process.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1478–1483, 2003     

Chemical modification of hemp,sisal, jute,and kapok fibers by alkalization

Plant fibers are rich in cellulose and they are a cheap, easily renewable source of fibers with the potential for polymer reinforcement. The presence of surface impurities and the large amount of hydroxyl groups make plant fibers less attractive for reinforcement of polymeric materials. Hemp, sisal, jute, and kapok fibers were subjected to alkalization by using sodium hydroxide. The thermal characteristics, crystallinity index, reactivity, and surface morphology of untreated and chemically modified fibers have been studied using differential scanning calorimetry (DSC), X‐ray diffraction (WAXRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM), respectively. Following alkalization the DSC showed a rapid degradation of the cellulose between 0.8 and 8% NaOH, beyond which degradation was found to be marginal. There was a marginal drop in the crystallinity index of hemp fiber while sisal, jute, and kapok fibers showed a slight increase in crystallinity at caustic soda concentration of 0.8–30%. FTIR showed that kapok fiber was found to be the most reactive followed by jute, sisal, and then hemp fiber. SEM showed a relatively smooth surface for all the untreated fibers; however, after alkalization, all the fibers showed uneven surfaces. These results show that alkalization modifies plant fibers promoting the development of fiber–resin adhesion, which then will result in increased interfacial energy and, hence, improvement in the mechanical and thermal stability of the composites. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2222–2234, 2002     

新一代水管式沉降仪控制模块的研制

新一代低功耗水管式沉降仪控制模块是基于16单片机MSP430F5436为处理器的低功耗装置.该文详细介绍了其硬件结构和工作原理,分别从电源系统、电磁阀控制电路、控制流程、数据采集等部分阐述了其特点,诠释了水管式沉降仪控制模块在人机交互、工作稳定性等多方面所具备的优势.新一代水管式沉降仪控制模块已在实际工程中得到了成功应用,其稳定性和精确性为大坝监控系统提供了准确的实时数据.     

外加电流阴极保护在海水冷却槽中的应用

论述了金属的电化学腐蚀和外加电流阴极保护原理。说明对以海水为介质的冷却、冷凝设备,采用外加电流阴极保护是防止设备腐蚀的有效方法。举例说明了应用效果。     

YL-1OO型自动加药装置在乙烯循环水场的应用

介绍了国产YL-100型自动加药装置功能及其在中国石化茂名石化乙烯工业公司乙烯循环水场的应用情况,结果表明其运行平稳,总磷测试数据可靠,可达到循环水自动加药控制的目的。     

D.s.c. investigation of the states of water in poly(vinyl alcohol-co-itaconic acid) membranes

The state of water in water-swollen poly(vinyl alcohol-co-itaconic acid) membranes, having various water contents from 0.31 to 0.83, was investigated by d.s.c. measurements and compared with those in water-swollen poly(vinyl alcohol) membranes. The amount of freezing water in the membranes was estimated by use of a relationship between the phase transition temperature and the enthalpy of the crystallization of supercooled water. The melting temperature of the water in the membranes immersed in urea and NaCl 0–2 mol l^?1 aqueous solutions was also determined by d.s.c. analysis. The present study proposes a method for estimating the solubilities of urea and NaCl in both of the freezing and the non-freezing water using the melting point depression of the freezing water in the membranes immersed in the solute solution.     

快速高效隔膜压滤机在鹤壁四矿选煤厂的应用

介绍了快速高效隔膜压滤机的主要性能参数和特点 ;分析了压滤机在煤泥水处理系统中的应用情况和运行结果 ;应用快速高效隔膜压滤机对煤泥水处理系统进行改造后获得了较好的经济及社会效益