工业循环冷却水用BC－653杀生剂的抗菌性能测定

本文对ＢＣ－６５３杀生剂进行了室内抗菌实验，着重阐述了投药量对杀菌率的影响。结果显示该杀生剂与国外同类产品杀菌力基本一致。     

现场总线技术在非能动压水堆核岛中的应用

本文结合非能动压水堆核电控制系统结构,详细介绍Profibus现场总线和Modbus现场总线在非能动压水堆核电控制系统中的应用,包括两种现场总线技术的结构配置及和现场智能仪控设备的连接,并简要分析现场总线技术在核电行业应用的优点和需克服的技术问题。     

On the thermal stability of xanthan gum

The thermal stability of xanthan gum in dilute aqueous solutions at 90°C is considered. The relative viscosity as a function of ageing time is discussed, and it has been found to depend on the polymer concentration and conformation as well as on the salt content. The effectiveness of a quencher demonstrates the existence of a free-radical process in the degradation. During ageing, the molecular weight first decreases by rapid random hydrolysis of the main chain and loss of the pyruvate and acetate substituents. Later, oligomers are formed corresponding to a breakdown of both the side chain and the main chain. The identification of cellodextrins in the oligomer pool demonstrates the second effect.     

有序介孔碳材料的模板化构筑及水处理应用研究

介孔碳材料是指孔径介于2 nm-50 nm的一类多孔碳材料。有序介孔碳材料，具有比表面积高、孔道结构规则有序、孔径分布狭窄、孔径大小可调控、表面易于修饰等结构特点和高机械强度、强吸附能力、化学惰性等性能特点，在诸多领域得到了广泛应用，特别是其作为新型吸附剂在水处理领域具有广阔的发展前景。有序介孔炭材料的制备方法主要有硬模板法和软模板法。模板和碳源的选择是控制有序介孔碳材料结构和性能的关键因素。本文从有序介孔硅、天然矿物、MOFs材料、嵌段共聚物等不同模板的角度对有序介孔碳、多级有序微/介孔碳、多级有序大/介孔碳的制备方法进行综述，并对有序介孔碳材料在水处理领域的应用进行简单介绍。     

丙烯酸高级酯共聚物组成与其无皂乳液稳定性研究

制备了不同分子结构的丙烯酸高级酯共聚物无皂乳液,测定了丙烯酸和甲基丙烯酸十六酯的竟聚率,考察了共聚物的组成对无皂乳液电解质稳定性、机械稳定性和pH值稳定性的影响。结果显示,丙烯酸竟聚率为2.32,甲基丙烯酸十六酯竟聚率为0.59,随共聚物中丙烯酸组分含量增加,乳液粒子表面羧基含量增大,乳液机械稳定性和pH值稳定性提高,乳液适合在偏碱性条件下使用。     

TW-6000 COD自动监测仪与标准法的对照实验

采用普析通用公司生产的TW－6000自动水质监测仪测定COD，与标准法（GB11914－1989）进行对照实验，再应用数理统计方法对结果加以分析，证明仪器法和标准法的数据无显著性差异（显著性水平为0.05，样本数为15)，且两者具有相似的精密度和准确度。     

Use of15N for fertilizer N recovery and N mineralization studies in semi-arid Kenya

Maize and beans were grown on a ferralsol at Kiboko, Kenya, with up to 120 kg N ha^–1. Within the 10 kg N ha^–1 plots,¹⁵N labelled fertilizer was applied in microplots. There was no significant response in yield to fertilizer N and labelled N recovery was low, being 7.5% or less in one season and 17.7% or less in the second season. Samples of Kiboko soil at four different water contents were incubated and the rate of gross N mineralization over 7 days was calculated, utilizing¹⁵N labelling of the mineral N. Gross N mineralization increased greatly with soil moisture and a fitted relationship between gross N mineralization rate and soil water content was obtained. Using measurements of soil water content at the field site, daily values of the soil N supply by gross mineralization were calculated. On average, modelled gross soil N mineralized could supply much (> 69%) of the N removed from the plots. It is suggested that the lack of response to fertilizer N may be explained by the coincidence of a high rate of N mineralization, and increased crop demand, caused by the onset of rain.     

钽平台-石墨炉原子吸收法测定高背景废水样品中的Cd、Pb

运用钽平台石墨管测定基体成分复杂的废水样品中的Cd、Pb元素,基本消除了基体残留影响和记忆效应,降低了背景吸收,提高了灵敏度。样品经超声波仪粉碎后直接进样,用校正曲线法测定,简化了操作步骤,减少了测定时间,延长了石墨管使用寿命。其测定值与石墨平台标准加入法测定值结果一致。样品回收率:Cd为96.9%～104%,Pb为98.2%～106%,Cd的相对标准偏差(RSD)为3.04%～4.24%,Pb的RSD为2.93%～6.53%。     

Processing and characterization of particles reinforced SiOC composites via pyrolysis of polysiloxane with SiC or/and Al fillers

Polysiloxane loaded with SiC as inert filler, and Al as active filler, was pyrolyzed in nitrogen to fabricate SiOC composites, and the processing and properties of the filled SiOC composites were investigated. Adding SiC fillers could reduce the linear shrinkage of filler-free cured polysiloxane in order to obtain monolithic SiC/SiOC composites. The flexural strength of SiC/SiOC composites reached 201.3 MPa at a SiC filler content of 27.6 vol.%. However, SiC/SiOC composites exhibited poor oxidation resistance, thermal shock resistance and high temperature resistance. Al fillers could react with hydrocarbon generated during polysiloxane pyrolysis at 600 °C and N₂ at 800 °C to form Al₄C₃ and AlN, respectively. The volume expansions resulting from these two reactions were in favor of the reduction in linear shrinkage and the improvement in flexural strength of SiC/SiOC composites. The flexural strength of Al-containing SiC/SiOC composites was 1.36 times that of SiC/SiOC composites without Al at an Al filler content of 20 vol.%. The addition of Al fillers remarkably improved the high temperature resistance and oxidation resistance of SiC/SiOC composites, but not thermal shock resistance.