Groundwater as a source and pathway for road salt contamination of surface water in the Lake Ontario Basin: A review

In Ontario, there is limited comprehensive research regarding the contribution of chloride in groundwater to surface water systems. The delivery of chloride via groundwater can contribute to the degradation of the Great Lakes and their tributaries. Thus, this review intends to fill or identify knowledge gaps regarding assessing groundwater as a potential source of road salt, the single largest use of salt in urban cold region environments, contamination to surface water by synthesizing existing groundwater chloride research in the Lake Ontario Basin. Knowledge regarding source characterization, properties, pathways, and impacts of chloride in the environment is essential to evaluate the contribution of chloride via groundwater. Past groundwater chloride research in the basin is primarily concentrated in highly urbanized areas and has identified localized trends of increasing groundwater chloride concentrations in these regions; however, few investigations have been conducted in varying land uses (e.g., rural or less urbanized watersheds) or at sufficient temporal and/or spatial scales. Significant chloride accumulation is occurring in watersheds and aquifers within the basin. Concentrations are expected to increase until equilibrium is obtained, thus resulting in sustained yearlong elevated concentrations in tributaries. Recently, chloride loading to Lake Ontario has increased significantly, with groundwater inputs having the potential to support long-term increases in chloride concentrations in the lake. However, few studies have evaluated the explicit contribution via groundwater to Lake Ontario, and therefore a knowledge gap continues to exist. We provide a synthesis of additional research priorities to better understand the magnitude of groundwater chloride issues in the basin.     

变化环境下“中华水塔”水资源及产流规律变化分析研究

受全球气候变暖的影响,“中华水塔”地区正面临着以“变暖变湿”为主的气候变化。受气候及下垫面条件的综合影响,区域水资源显著增加,各流域产流机理在空间上呈现出明显的地区差异特征。基于“中华水塔”区域1956—2020年水文气象资料,通过趋势、突变、距平等分析方法,分析其水文要素和产流规律的变化趋势、特征及相互之间影响关系。结果表明：近年来“中华水塔”区域气温显著升高,蒸发能力总体增强,区域进入丰水期,降水、径流显著增加,在同等降水径流尺度下,黄河源区产流能力有所降低,长江、澜沧江源区产流能力明显增强;气温升高、降水量持续偏丰以及流域前期影响雨量（蓄水量）增加、枯季径流比例提高、下垫面生态持水能力增强是引起区域产流规律变化、水资源量增加的主要原因。     

基于回收质量不确定与政府双参与的再制造闭环供应链定价策略研究

基于回收质量不确定的现实考虑,运用Stackelberg博弈论方法研究政府补贴和碳税双参与的再制造闭环供应链的定价问题,采用数值仿真的方法量化分析补贴额度和碳税率对再制造闭环供应链定价策略、供应链各成员利润、供应链碳排放量的影响,以及回收质量对再制造闭环供应链的影响。研究发现：政府补贴和碳税的双参与改善了由政府征收碳税而引起的市场不活跃现象,促进了闭环供应链的回收再制造,比单纯补贴或碳税更有效地引导了再制造闭环供应链;无论哪种手段参与,提高废旧产品的回收质量都有助于提高废旧产品的回收量、制造商的利润、第三方回收商的利润以及供应链的总利润,也有助于降低供应链的碳排放。     

火电厂节水技术探讨

火力发电厂是耗水大户，随着水资源的日渐匮乏及环保法律的日趋严格，合理利用水资源，提高水的重复利用率，已成为火电厂面临的紧迫任务。在对厦门嵩屿电厂节水工作进行介绍的基础上，提出火电厂可采用的节水管理措施与技术改进措施，可为其他电厂的节水工作及水务管理工作提供借鉴。     

Assessment of Bitumen Re c overy from the Athabasca Oil Sands Using a Laboratory Denver Flotation Cell

A methodology was developed in this study to evaluate the effect of operating parameters on the processability of oil sands using small‐scale laboratory experimental devices. By subtracting bitumen recovered to the froth by entrainment with water, the concept of “true flotation recovery” is proposed to describe bitumen recovery resulting from bitumenbubble attachment. The experimental results indicated that “true flotation recovery” is a more sensitive and meaningful marker than overall bitumen recovery to evaluate the processability of oil sands using small‐scale laboratory test units.     

单组分聚氨酯乳液制备及其结构与性能研究

采用预聚合法,以聚酯二元醇(PEA)、甲苯二异氰酸酯(TDI)、二羟甲基丙酸(DMPA)为基本原料合成了分子链上带有亲水基团(-COOH)的聚氯酯预聚体。以特殊的水化方式制得聚酯型水性聚氨酯乳液。讨论了温度、-NCO-与-OH的物质的量之比(R)、亲水基团含量、合成工艺分别对材料力学性能、耐水性、玻璃化转变温度(Tg)等的影响。研究发现,采用前中和工艺、在高速搅拦下将预聚物加入到水中的水化方式,当R值为1．2,羧基含量为1．6％时,合成的聚酯型水性聚氨酯乳液具有较好的贮存稳定性,且涂膜的耐水性和力学性能良好。     

Time-of-flight studies on catalytic model reactions

Time-of-flight spectroscopy (TOF) and REMPI-TOF (resonance enhanced multi-photon ionization-TOF) were applied to measure the angular and translational energy distribution, as well as the internal state resolved energy distribution of desorption and reaction products on some model systems. Desorption of hydrogen and deuterium from clean and modified Pd(111) surfaces was studied, where the palladium sample was part of a permeation source. Water formation by reaction of oxygen with hydrogen on palladium was investigated by using different types of hydrogen supply: molecular H₂ exposure and atomic H exposure from the gas phase, as well as H exposure by permeating hydrogen. Vanadium oxide nanostructures on Pd(111) were prepared and the influence on D₂ desorption and D₂O production was investigated with the permeation technique. Additionally, deuterium desorption from sulfur and oxygen covered V(111) and V(100) surfaces was studied by TOF and REMPI-TOF spectroscopy. From the TOF spectra information concerning the reaction and desorption dynamics (activation barriers) could be gained.     

YL-1OO型自动加药装置在乙烯循环水场的应用

介绍了国产YL-100型自动加药装置功能及其在中国石化茂名石化乙烯工业公司乙烯循环水场的应用情况,结果表明其运行平稳,总磷测试数据可靠,可达到循环水自动加药控制的目的。     

超临界水中NaCl无限稀释扩散系数的研究

The molecular dynamics(MD) was employed to simulate the diffusion coefficient of sodium chloride at infinite dilution in supercritical water from 703.2K to 763.2K and from 30 MPa to 45 MPa ,Based on the simulated data and the Patel-Teja(PT) equation of state and the Liu-Ruckenstein equation,an equation for calculating the diffusion coefficient of NaCl at infinite dilution in supercritical water is proposed,Both the agreement between the simulated and correlated data,and that between the simulated and predicted data of diffusion coefficients for NaCl in supercritical water ranging from 703.2K to 803.2K and from 25 MPa to 50MPa show that this equation is applicable for calculation of diffusion coefficients.     

Electrochemical ferrate generation for waste water treatment using cast irons with high silicon contents

This paper deals with the electrochemical preparation of ferrate in 15 M NaOH media, with a view to treatment of waste waters. Grey cast irons with high silicon contents were shown to allow current yields in the range 20–40% depending on the applied current density, up to 34 mA cm^–2. Ferrate solutions with contents up to 0.08 M could be produced in a divided cell of simple design, and provided with flat or packed-bed electrodes. Deactivation of the anode surface was shown to be of moderate significance for hour-long runs. The ferrate produced was tested for treatment of industrial liquid wastes: coagulation efficiency of the suspended matter was comparable with that of an electrocoagulation process with sacrificial Al anodes. The potential of waste water treatment by addition of ferrate is discussed.