纳米四氧化三铁磁性微粒的表面有机改性

通过液相共沉淀法制备了纳米四氧化三铁溶胶，利用油酸对纳米粒子体进行表面改性和萃取实验，获得油酸包覆的四氧化三铁微粒。采用FT—IR和高分辨透射电镜对改性后的纳米粉体进行结构和形貌的表征。研究结果表明油酸与四氧化三铁纳米粒子间存在化学键结合。油酸对纳米四氧化三铁微粒进行改性，并且对纳米粒子进行包覆，使外表面形成保护层阻止粒子团聚，改性后的四氧化三铁微粒与有机物具有良好的相溶性，采用表面改性显著改善了纳米四氧化三铁微粒的性能指标。     

酪素/蒙脱土插层复合物制备及其耐水性能研究

在十六烷基季胺盐存在下进行蒙脱土插层得到[H4N(CH2)15CH3]+-蒙脱土插层物,酪素加热溶解后与[H4N(CH2)15CH]+-蒙脱土插层物混合,保温复合,然后沉淀分离,得到干酪素/蒙脱土纳米复合物。用XRD,TEM和TGA表征酪素纳米复合物的结构与性能。结果表明,插层复合物中蒙脱土晶片间距扩大,插层复合物耐热性能明显提高,与纯酪素相比,复合物拥有极好的耐水性能,特别适用于制备高速高性能啤酒生产线用贴标胶。     

气流床水煤浆气化技术的应用现状及开发进展

气流床水煤浆气化是煤高效、洁净利用的一项关键技术。简述了具有代表性的气流床水煤浆气化技术的应用现状及开发进展,并分析了影响水煤浆气化的主要因素,如烧嘴、耐火砖、进料系统、激冷环等,提出了一些改进措施。     

望远镜专用PVC外装饰皮的开发应用

从生产用原材料、配方、生产工艺及影响因素等方面介绍了软质PVC在望远镜用外装饰皮中的应用,并进行了分析、探讨,提出了软质PVC在望远镜用外装饰皮中研制开发的看法与建议。     

锂电极表面膜的组成和阻抗行为

介绍了锂电池中锂电极的表面膜的组成和阻抗行为，并根据其表面膜的阻抗行为提出了电化学模型。     

Investigations of surface degradation of high‐density polyethylene materials resulting from tracking,using physicochemical analysis

In the present work tracking phenomena were studied with high‐density polyethylene (HDPE) materials under dc voltage, with NH₄Cl and acid rain as contaminants. It was determined that the tracking time of the material depends on the conductivity and flow rate of the contaminant. Furthermore, physicochemical analysis by wide‐angle X‐ray diffraction studies, differential scanning calorimetry, and luminescence spectroscopy was carried out, whereupon it was concluded that the tracking process is a surface‐degradation process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2843–2849, 2002; DOI 10.1002/app.10260     

Preparation of fluoroacrylate nanocopolymer by miniemulsion polymerization used in textile finishing

Latex based on fluoroacrylate (TAN) and other comonomers was prepared via miniemulsion polymerization in the presence of stearyl trimethyl ammonium chloride (STAC) and 2, 2′‐azobis (2‐amidinopropane) dihydrochloride (ABAP) as a water soluble initiator. Light transmittance studies demonstrated that the light transmittance of prepared emulsions increases with the amount of TAN, STAC, cosolvent DPM, and hydrophobe DM. Given suitable reaction temperature and quantities of TAN, STAC, DPM, and DM, a copolymer emulsion of fluoroacylate with a particle size of 50 nm was produced. The water repellency tested on polyester fabrics displayed greater effectiveness than that of commercial products with higher fluorine content. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1466–1472, 2004     

Process optimization of sweet potato pulp‐based biodegradable plastics using response surface methodology

Biodegradable plastics were produced from sweet potato pulp (SPP) and cationic starch (CS) or chitosan composite (CC) by compression molding and their mechanical properties were tested. A universal testing machine, Rockwell hardness tester, and Izod impact tester were used for testing the mechanical properties (flexural strength, Rockwell hardness, and Izod strength) of the plastics. A central composite second‐order design was used to study the effects of temperature, time, and moisture content on the flexural strength, Rockwell hardness, and Izod strength of SPP/CS and SPP/CC blended plastics. The flexural strength, Rockwell hardness, and Izod strength of SPP‐based plastics was 101.1–305.9 kg/cm², R29.0–R96.7, and 0.6–3.0 kg cm cm^?2, respectively. Regression analysis predicted the optimal mechanical properties (flexural strength, Rockwell hardness, and Izod strength) to be attained with a 150–160°C temperature, 15–20‐min reaction time, and 20–23% moisture content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 423–434, 2002     

Simulation studies on the fuel electrode of a H2---O2 polymer electrolyte fuel cell

The macro-homogeneous porous electrode theory is used to develop a model which describes the catalyst layer of the hydrogen electrode formed by catalyst particles that are bonded to the membrane. The water transport in the catalyst layer and polymer electrolyte membrane is considered. The effects of catalyst layer structure parameters such as polymer volume fraction, catalyst layer thickness, platinum loading and reactant gas humidity as well as CO poison on the hydrogen electrode behavior are examined. The results show that the catalyst layer thickness has a significant effect on the electrode performance. A thicker catalyst layer will result in a larger ohmic voltage loss and higher catalyst cost. The optimal polymer volume fraction and catalyst layer thickness are 0.5 and 1.5–4 μm, respectively, for this electrode. An optimal platinum surface coverage on carbon need not exceed 20% (20 wt% Pt/C). Larger platinum coverage will increase the cost, but only slightly enhance the electrode performance.     

工业循环冷却水成套节水新技术在天津石化乙烯厂的应用

为解决天津地区水资源短缺的现状，通过应用先进的水处理药剂及自动监控技术，在天津石化公司乙烯厂成功地建成了高浓缩倍率冷却水处理技术示范工程，系统浓缩倍率从3倍提高到5倍以上，年节水量超过60万t。