汽车喷烤漆自动控制系统

本文通过研究目前汽车烤漆房的实际运行情况，提出了一种汽车烤漆房喷漆自动控制系统，阐述了系统喷漆装置的构成、配合与运行原理，并构成了实际试验系统。     

WAVE FIELD EXTRAPOLATION IN VISCOELASTIC MEDIUM AND VARIABLE FOCUS METHOD TO SEPARATE SEISMIC COMPOUND WAVE

ＷＡＶＥＦＩＥＬＤＥＸＴＲＡＰＯＬＡＴＩＯＮＩＮＶＩＳＣＯＥＬＡＳＴＩＣＭＥＤＩＵＭＡＮＤＶＡＲＩＡＢＬＥＦＯＣＵＳＭＥＴＨＯＤＴＯＳＥＰＡＲＡＴＥＳＥＩＳＭＩＣＣＯＭＰＯＵＮＤＷＡＶＥ￥ＳｏｎｇＳｈｏｕｇｅｎ；ＹｕａｎＸｉｕｇｕｉ；ＨｅＪｉｓｈａｎ...     

天然气井下节流嘴前后压力温度分布的数值计算

针对天然气井安装井下节流装置以后很难测得节流嘴上游压力的情况,从空气动力学的原理出发,提出根据井口采集的数据,从节流嘴下游向上游计算其喉部和上游的压力温度综合值的数值计算方法。采用临界状态判别的新方法,即依据节流嘴出口处的马赫数的值,对节流嘴附近的流态进行判别,再分别计算节流嘴出口处,节流嘴喉部以及节流嘴上游的各参数。对宝1井进行了实例计算,计算结果表明:节流后压力温度骤降,经过激波面后压力温度急剧升高的变化情况。     

先进控制技术在波浪发电系统中的应用

由于波浪储量丰富,具有随机性,如何控制波能转换系统捕获最大波能和控制并网电能质量成为波浪发电的核心问题。简述了波能转换装置实现最大波能捕获的方法,综述了滑模变结构控制、自适应控制、最优控制、智能算法、模糊控制、无源控制在控制最大波能捕获以及改善电能质量方面的研究成果。并提出未来的控制算法应是多种先进控制算法相结合。     

方波激励下纳米晶体铁心损耗模型建立与验证

为了实现电力机车小型化轻量化的发展要求,国内外专家考虑通过采用提高变压器的工作频率减小变压器整体的体积和质量。铁心作为高频变压器的关键部件,可以准确计算铁心损耗,对中高频变压器的设计和优化具有重要作用。针对高频变压器铁心通常是工作在方波或脉宽调制(PWM)波等非正弦激励下的特点,对传统Steinmetz损耗计算模型进行了优化改进,给出了考虑磁密的变化率及波形系数对损耗的影响的Steinmetz改进损耗模型。同时,为了提高损耗模型在不同特征频率下的通用性,进一步对损耗模型系数的非线性进行研究,给出了模型系数随频率变化的非线性函数。最后,利用有限元计算结果同实物测量结果进行比较,证明了所提损耗模型在方波激励下对纳米晶体铁心计算的准确性。     

露天矿山深-浅耦合台阶爆破方法研究及应用

爆破大块率高一直是困扰国内外众多露天矿山的技术难题,银山矿露天采矿场由于采区地质条件复杂,爆破大块率高的现象尤为明显。为此,针对露天采矿场岩性复杂易产生大块的区域,基于岩石的物理力学性质,计算出千枚岩和斑岩爆破区域需增设的短孔孔位。为减少爆破大块的产生率,提出了中深孔爆破方法—深-浅耦合台阶爆破方法。在银山矿露天采矿场实施深-浅耦合台阶爆破方法后,爆破大块率得到有效控制并取得了显著的社会及经济效益。     

Ability of the direct wave of radar ground-coupled antenna for NDT of concrete structures

The research work presented in this paper aims at evaluating the potential of the direct wave of radar ground-coupled antennas for the on site physical characterization of concrete. According to studies highlighting the ability of radar reflected waves to characterize concrete, the potential of the direct wave is studied by systematic comparison of direct and reflected wave attenuations. Among the various features of electromagnetic waves propagating through concrete, attenuation is the most sensitive to moisture and chloride contents. In order to study the sensitivity of the direct wave to the physical condition of the concrete, laboratory experiments were conducted on concrete slabs with various porosities, water contents and chloride contamination levels.The results of this study show very satisfactory correlations between attenuations of direct and reflected waves, indicating that both waves provide similar information regarding the physical state of concrete. This correlation was confirmed on two bridges by comparison of direct wave attenuation maps with reflection attenuation maps. Therefore, radar interpretation method based on the direct wave attenuation should be able to detect, in a very fast way, physical contrasts in concrete structures and, consequently, identify probable pathological areas.     

STUDY ON THE SHOCK WAVE CRYSTALLIZATION OF AMORPHOUS ALLOYS BY DSC

Shock wave and annealing crystallization of amorphous alloys FeSiB, FeMoSiB and FeCuNbSiB were studied by isothermal and non-isothermal DSC technique. It was found that the shock wave crystallization is very perfect, the fraction crystallized is very close to 100%, though the period of crystallization is very short, only about 10-4-10-6s. Their produced phases differ from the parent phase in structure and composition. The high velocity of the transformation is very difficult to explain by the diffusion theory of solid state phase transition.     

波形控制逆变CO2焊接电源关键控制信号的获取

通过分析波形控制CO2焊接过程，介绍了焊接电源空载、燃弧、短路等工作状态的判别，电流、电压、du/dt、di/dt等关键信号的获取方法，为研制波形控制CO2逆变焊机奠定了基础。     

Feedrate optimization and tool profile modification for the high-efficiency ball-end milling process

Trend in die/mold machining is to produce highly quailed surface using the high-speed hard machining with the ball-end cutter. The ball-end milling is, however, less efficiency than the flat end milling. It is important to optimize the feedrate that gives the maximum material removal rate constrained by an allowable surface roughness. The state-of-art of the CBN ball-end cutter technology allows increasing the tooth feed for high-speed and high-efficiency machining. However, because the spherical shape of the cutter can result in the scallop-liked cusps on the machined surface, the surface roughness consideration makes a feedrate limitation to the CBN cutter. In this paper, the optimization of the feedrate by considering the generated-scallop effect of the ball-end cutter has been studied. It was found that the tooth feed must be kept within one third of the path pick in order to keep the feed-interval scallop height not over the path-interval scallop height. Therefore, the potential capability of the CBN cutter for the larger tooth feed (i.e. high efficient) machining can not be fully exploited. It was found a notch-cut on the center of the ball-end cutter reduced the feed-interval cusp height, thus allowing an increased feedrate of more than 50% compared with the standard ball-end cutter. If the parameters of the notch-cut profile can be optimized, it is believed that the feedrate can be further increased.