On the ‘curiosity’ of electrical self‐heating,static charge and electromagnetic shielding effectiveness from carbon black/aluminium flakes reinforced epoxy‐resin composites

This paper shows the wide application range (such as electrical self‐heating and electromagnetic shielding effectiveness) of composites consisting of conductive carbon black/aluminum flakes (CBA) filler and epoxy insulative matrix. The effect of CBA content on the network structure of epoxy matrix was investigated in detail. Static electrical conductivity increases linearly with the increase of filler concentration at the interface in epoxy composites. The large decrease of the conductivity as a function of the temperature is analyzed in terms of the negative temperature coefficient of conductivity (NTCC) effect. The influence of viscosity, surface energy and barrier highest energy on the NTCC behaviour in the composite is also considered. Based on these results, a new interpretation is proposed to explain the NTCC phenomena by computing the swelling force among conductive phases. The correlations of conductivity during the temperature cycling and activation energy were analyzed. The effects of dynamic ageing at various temperatures on the resistivity are reported. Current–voltage–temperature characteristics for epoxy with different contents of CBA were examined in detail. A model based on the law of energy conservation is proposed to calculate the specific heat and amount of heat dissipation. The static charge of the epoxy–CBA composites was estimated. The correlation between electromagnetic wave‐shielding effectiveness (EMS), conductivity and frequency of epoxy composites with different filler contents is also discussed. Furthermore, the effect of annealing on EMS of epoxy composites was examined. © 2002 Society of Chemical Industry     

Structure of the Reaction Zone of a Steady Detonation Wave in Dinitrodiazapentane

The massvelocity profiles in 2,4dinitro2,4diazapentane samples of different densities were registered by a laser interferometer and the electromagnetic technique. The reaction time was shown to reach 300 nsec and weakly depend on density, while the pressure in the chemical spike can be twice as high as that at the Chapman–Jouguet point. No special features due to diamond formation were observed in the massvelocity profiles registered in the chemical reaction zone.     

基于可调功率因数的单相AC－DC变换电路设计

本文以2013年全国大学生电子设计竞赛A题为依据,设计的单相AC-DC变换电路32位的STM32f103作为主控制器,主电路由220V市电经过自耦变压器,隔离变压器降至20-30V交流电,后接全桥整流电路,使电路稳定输出36V直流电,主电路通过硬件电流电压PI闭环控制,双环控制来调节输入的电流和输出电压,输入的交流电压和交流电流通过互感器采到单片机内,程序通过改变产生的正弦波的相位来改变功率因数,从而达到功率因数可调的目的,使设计的电路能包含题目中要求的所有部分,并通过优化而达到题目的要求,在主电路中加入继电器,控制继电器断开从而实现过流保护的功能。     

基于次生波的输电线路智能驱鸟装置设计

为了减小鸟类对输电线路可靠性的影响,利用次声波驱鸟原理,设计了一种新型的智能型驱鸟装置,该装置具有一定的实用价值.     

Interaction of a shock pulse with a contact discontinuity

Passing of a triangular moderate-intensity pulse through a constant discontinuity is considered. Decay of the shock wave that passed into the second gas is analyzed. Damping of the detonation wave after burnout of the combustible mixture is discussed. __________ Translated from Fizika Goreniya i Vzryva, Vol. 43, No. 4, pp. 102–107, July–August, 2007.     

The study on the conductivity of styrene-maleic anhydride copolymer electrolytes based on poly(ethylene glycol)400 and LiClO4

Polyelectrolytes, in this study were synthesized from styrene-maleic anhydride (SMA) copolymer, poly(ethylene glycol)400 (PEG400), and lithium perchlorate (LiClO₄). Fourier transform infrared spectroscopy (FTIR), and magic angle spinning (MAS) solid-state NMR were used to monitor the interaction between Li⁺ ions and polymer. The results of FTIR and MAS solid-state NMR indicate the Li⁺ ions are preferentially coordinated to the ether oxygen of PEG. The T_g of the PEG segments in polyelectrolyte increases with LiClO₄ concentration, as determined by differential scanning calorimetry (DSC), indicating that solubility of the Li⁺ ions in the host polymer increases with the PEG content. Impedance spectroscopy (IS) shows that the bulk conductivity of polyelectrolytes and the conductivity behavior obeys the Vogel-Tamman-Fulcher (VTF) equation.     

混合波原子和双边滤波的纹理图像滤波方法

为了更好地去除纹理图像中的噪声, 提出了一种新的混合波原子阈值的振荡纹理图像扩散模型; 利用扩散方程和图像滤波方法的理论联系, 给出了联合双边滤波的图像去噪算法; 最后, 利用峰值信噪比(PSNR)和结构相似度(SSIM)两个客观图像质量评价指标, 与目前流行的图像去噪方法(包括波原子阈值、双边滤波、高斯尺度混合(GSM), 以及非局部滤波(NLM))进行比较。 实验结果验证了新方法的有效性。     

水平管气液两相弹状流液弹频率的水动力学新模型

The prediction of slug frequency has important significance on gas-liquid two-phase flow. A hydrodynamic model was put forward to evaluate slug frequency for horizontal two-phase flow, based on the dependence of slug frequency on the frequency of unstable interfacial wave. Using air and water, experimental verification of the model was carried out in a large range of flow parameters. Six electrical probes were installed at different positions of a horizontal plexiglass pipe to detect slug frequency development. The pipe is 30 m long and its inner diameter is 24 ram. It is observed experimentally that the interracial wave frequency at the inlet is about i to 3 times the frequency of stable slug. The slug frequencies predicted by the model fit well with Tronconi (1990) model and the experimental data. The combination of the hydrodynamic model and the experimental data results in a conclusion that the frequency of equilibrium liquid slug is approximately half the minimum frequency of interfacial wave.     

超声波测距的模糊控制泊车系统模型设计

设计了一种基于超声波测距的自动泊车系统模型。首先对小车运动模型进行分析,结合实际设计垂直、平行、斜行三种泊车模糊控制器,并且在Matlab的Simulink中分别进行仿真验证。采用超声波测距技术、视频采集技术等来获取周围环境数据,按照实际车辆和车库的大小,通过等比例缩放设计小车模型和车库模型,并把验证通过的模糊控制器转换为C代码,嵌入到飞思卡尔K60主控制板中进行自动泊车可行性测试。经测试,当模型车的航向角在-32°~+32°范围内时,实现了模型车在0.92倍标准大小模型车库内的自主泊车。     

Dynamic Compressibility of Carbamide at Low Pressures

The shock adiabats of pressed carbamide samples with a density of 1.29 g/cm³ and carbamide samples with a bulk density of 0.78 g/cm³ were studied at pressures of 1–14 GPa using an electromagnetic method. In the coordinates D and U, the shock adiabat of pressed carbamide is linear and the shock adiabat of carbamide of bulk density at a pressure of 2.4 GPa is represented as two linear segments: D = 2U at 0.6 < U <1.3 km/sec and D = 0.6 + 1.55U at 1.3 <U < 2.8 km/sec. The possibility of a phase transition in carbamide under shock compression is discussed.