规划动态性特征分析及其在城市设计中的应用——以聊城市徒骇河两岸规划发展为例

城市功能交界区是城市一体化发展的重点区域,而城市中央滨水区域则是城市"都市生活"的核心区域。在功能交界区的滨水地带向中央滨水区过渡的过程中,滨水区域凭借便利的交通及优越的自然环境,往往成为城市功能角色转变中最大的区域,也是城市规划管理中最具动态性、最难控制的区域。研究以聊城市徒骇河两岸近十年的规划发展为例,分析规划动态性的成因,探究规划动态管理在城市设计中的应用,为规划编制和规划管理提供借鉴与参考。     

MDS800-60双吸泵的研制与开发

根据辽源泵业公司现有泵型及技术力量在MD580-60泵的基础上对吸水段和首级叶轮进行设计改造,开发出一种新产品MD580-60双吸泵,以扩大市场竞争力。     

保险杠总成检具的设计

分析了汽车前保险杠总成检具各组成部分的定位、检测设计情况,重点分析了两侧翼子板处定位、检测的设计,此检具设计既实现了模拟翼子板功能,又实现了加工的可行性。     

Numerical simulation of the wire‐pinning process in PET film casting: Steady‐state results

Poly(ethylene terephthalate) (PET) film casting involves melt flow through a slot die, across a small span, and onto a fast moving quench drum. In the “wire‐pinning” casting process, a thin electrified wire close to the line of contact with the drum creates a strong pinning force that delays air entrainment to higher line speeds. Nonuniform wetting of the die lips by the extruded melt is thought to be responsible for the formation of streaks, a defect in the machine direction. A finite element model of the film casting process with wire pinning was developed to assist in understanding what causes significant wetting of the lips and whether this can be avoided by electrostatic pinning. The solution of the governing equations provide the location of the static and dynamic contact lines, thus finding the wetting and pinning points in the process. The simulations investigate the sensitivity of the static wetting line locations on the die lands to the imposed values of static contact angle and die‐lip gap. It was found that while the contact angle has a small effect on the extent of die‐lip wetting within the parameter ranges examined, there is a considerable chance that the feed slot surfaces can be dewetted. This seems to be the greatest danger for causing streaks rather than excessive wetting of the die lands. © 2011 American Institute of Chemical Engineers AIChE J, 2012     

Lead‐Free Polycrystalline Ferroelectric Nanowires with Enhanced Curie Temperature

Ferroelectrics are important technological materials with wide‐ranging applications in electronics, communication, health, and energy. While lead‐based ferroelectrics have remained the predominant mainstay of industry for decades, environmentally friendly lead‐free alternatives are limited due to relatively low Curie temperatures (T _C) and/or high cost in many cases. Efforts have been made to enhance T _C through strain engineering, often involving energy‐intensive and expensive fabrication of thin epitaxial films on lattice‐mismatched substrates. Here, a relatively simple and scalable sol–gel synthesis route to fabricate polycrystalline (Ba_0.85Ca_0.15)(Zr_0.1Ti_0.9)O₃ nanowires within porous templates is presented, with an observed enhancement of T _C up to ≈300 °C as compared to ≈90 °C in the bulk. By combining experiments and theoretical calculations, this effect is attributed to the volume reduction in the template‐grown nanowires that modifies the balance between different structural instabilities. The results offer a cost‐effective solution‐based approach for strain‐tuning in a promising lead‐free ferroelectric system, thus widening their current applicability.     

Time–cost optimization: using GA and fuzzy sets theory for uncertainties in cost

Uncertainties should be considered in any time–cost trade‐off problems when minimizing project cost and duration, which leads to the so‐called stochastic time–cost trade‐off problem. A new approach to investigate stochastic time–cost trade‐off problems employing fuzzy logic theory is presented. The proposed approach fully embeds the fuzzy structure of the uncertainties in total direct cost into the model. An appropriate GA is used to develop a solution to the multi‐objective fuzzy time cost model. The accepted risk level of the project manager is defined through α cut approach for which a separate Pareto front with set of non‐dominated solutions has been developed. To compare the alternative set of options for any assumed project duration, associated fuzzy costs for different values of α cut are ranked employing two appropriate approaches for fuzzy costs comparison. The proposed models are applied to solve two benchmark test problems. It is shown that the models facilitate the decision‐making process by selecting specified risk levels and employing the associated Pareto front.     

A review of the operating limits in slot die coating processes

Slot die coating is a pre‐metered process commonly used for producing thin and uniform films. It is an important film fabrication method for applications where precise coating is required. A major concern in slot die coating processes is how to determine the operating limits to set the appropriate range of operating parameters, including coating speed, flow rate, vacuum pressure, coating gap, liquid viscosity and surface tension, etc. Operating limits directly determine the effectiveness and efficiency of the process. In this article, the current state of academic research on operating limits in slot die coating processes is reviewed. Specifically, the theories, mechanisms, and empirical conclusions related to the limits on vacuum pressure, the low‐flow limit, the limit of wet thickness for zero‐vacuum‐pressure cases, the limit of dynamic wetting failure, and the limits of coating speed for a specific flow rate are reviewed. The article concludes with some recommendations for future work. © 2016 American Institute of Chemical Engineers AIChE J, 62: 2508–2524, 2016     

螺旋角与螺纹升角不一致情况下滚刀前刃面齿距测量分析

在设计螺旋槽滚刀时会出现螺旋角与螺纹升角不一致的情况,此时由于刀具刃口方向螺旋角与刀具左右侧切削刃实际螺纹升角之间有差别,刀具的前刃面与切削刃螺旋平面不垂直,因此在万工显上测量前刃面齿距时需对齿形进行两次投影换算。如仍按螺纹升角与螺旋角一致情况下进行投影换算测量,会引起刀具齿距测量误差。在制造螺旋角与螺纹升角不一致的滚刀时,对滚刀齿距进行正确投影并精确测量。