熔渣法碳化铬涂层的抗氧化性能研究

对熔渣法碳化铬涂层在各种温度下经20h和200h的氧化性能进行了研究，与常用的一些锅炉用钢进行了对比试验，结果表明碳化铬涂层抗氧化性能比15CrMo、102、T91钢好，可以与TP347钢相媲美。     

Effect of heat treatment on microstructure and properties of hot-extruded nickel-aluminum bronze

The effect of heat treatment on the microstructure and properties of a hot-extruded nickel-aluminum bronze was investigated. Experimental materials were heat treated through different processes, including quenching, normalizing, aging and annealing, and their microstructure, corrosion resistance and mechanical properties were characterized. It is found that quenching causes all β phase transformed into β phase, however, normalizing causes β phase transformed into β α and κ phases. When the quenched sample is aged, fine phase is precipitated from the as-quenched microstructure of β＇ phase. Annealing causes the transformation of β into a and κ phases. The results of mechanical property tests show that quenching, normalizing and aging improve the tensile strength and hardness of the experimental material, with a corresponding fall in elongation. Annealing raises the elongation but reduces the tensile strength and hardness. Furthermore, corrosion resistance of nickel-aluminum bronze ranks from worse to better in the following order： aged, quenched, normalized, hot-extruded and annealed. However, with the exposure time of corrosion test increasing, the difference of average corrosion rate between those nickel-aluminum bronzes tums small.     

Influence of alloy ingredients on mechanical properties of ternary boride hard alloy clad materials

Using Mo, B-Fe alloy and Fe powders as raw materials, and adding C, Cr and Ni ingredients, respectively, or C, Cr and Ni mixed powders, ternary boride hard alloy clad materials was prepared on Q235 steel substrate by means of in-situ reaction and vacuum liquid phase sintering technology. The influence of alloy ingredients on the mechanical properties of ternary boride hard alloy clad materials was investigated. The results indicate that a mixture of 0.8% C, 5% Cr and 2% Ni ingredients gives a ternary boride hard alloy clad material with optimal mechanical properties, such as high transverse rupture strength, high hardness and good wear resistance.     

Corrosion-Electrochemical behavior of 13% chromium (Cr) martensitic stainless steel in hydrochloric acid (HCl) solutions

Corrosion-Electrochemical behavior of a commercial API5CT grade L80 type 13Cr tubing enriched with microalloying elements is studied in 6, 7.5, 9, 12 and 15% HCl solutions by electrochemical methods. The objective is to contribute to the comprehension of corrosion phenomena caused by HCl of similar concentrations, generally used in acidizing job. The corrosion morphology is examined by scanning electron microscopy (SEM) coupled with EDAX. The soluble corrosion products are analyzed by atomic absorption spectroscopy and colorimetric methods. General, as well as localized, corrosion is present. The severest general corrosion with a maximum rate of 26 mm/year is obtained at 15% HCl. The localized corrosion which morphologically differs as function of HCl concentrations is revealed by SEM investigation. In all the above HCl solutions, the commercial 13% Cr martensitic stainless steel tubing shows no passive state. Above 6% HCl, the microalloying elements promote forming a discontinuous film of the corrosion products. The corrosion rate slightly decreases in 15% HCl compared to the published data on a conventional 13% Cr martensitic stainless steel tubing. This is due to both the chemical composition (silicon, manganese and vanadium) and microstructural properties. Copper seems to additionally accelerate the corrosion of the alloy. Published in Russian in Zashchita Metallov, 2007, Vol. 43, No. 4, pp. 372–380. The article was translated by the authors in English.     

深冷处理与工模具的耐磨性

热处理后的金属材料再经低落曙处理，其力学能明显提高，尤其是高碳高合金工模具钢的耐磨性提高特别显著。本文着重研究了应用面较广的Ｗ６Ｍｏ５Ｃｒ４Ｖ２钢的处理工艺制度，组织性能及其磨损机理。     

浅议降低脉冲袋式除尘器运行费用的几点措施

脉冲袋式除尘器,因其具有良好的清灰效果,并可在较高的过滤风速下稳定运行,因而在袋式除尘器中,占有极其重要的地位。本文介绍了如何降低脉冲袋式除尘器的运行费用,并提出了相应的措施及其在设计中应注意的问题。     

Zr41.5Ti14Cu13Ni10Be22.5大块非晶的耐蚀性能

用浸泡法研究了ZrTiCuNiBe大块非晶合金在酸、碱、 盐各种腐蚀性介质中的腐蚀行为.并与典型材料做了比较，结果表明：ZrTiCuNiBe大块非晶合金具有良好的耐蚀性.     

PTA装置中冷凝器壳体腐蚀原因分析及防护对策

对仪征化纤化工厂PTA装置中反应器第一冷凝器E-112 壳体腐蚀状况进行了分析.结果表明，高温高压冷凝液的冲刷是造成E-112壳体腐蚀穿孔的 主要原因，并提出相应防护对策.     

FORMATION OF MANGANESE SILICIDE THIN FILMS BY SOLID PHASE REACTION

1. IntroductionThe transition metal silicides have attraeted much attention because of their potentialapplicatiOIl in very large scale integration (VLSI) de.ice[1]. Near-noble metal silicides canbe used as Schottky al1d ohn1ic col1tacts in silicon-based d…     

Observations on the role of oxide scales in high-temperature erosion-corrosion of alloys

The results are presented of exposure to a controlled high-temperature erosive gas stream of a series of alloys, which were selected to represent the range of microstructures and mechanical properties available in commercial high-temperature alloys. Analysis of the kinetic and morphological data suggested that the high-temperature oxidation behavior of a given alloy plays a very important role in determining its erosion-corrosion behavior under the conditions studied. In terms of relative behavior, alloys which are weak but ductile at temperature, and which form tenacious oxide scales, exhibited the highest resistance to high-temperature erosion-corrosion. Simple models were developed to describe the expected interaction between high-temperature oxidation and erosion.