核废料高放废液玻璃固化焦耳炉出料管受力分析

避免出料管破裂或断裂是保证核废料高放废液玻璃固化进程的重要措施之一。通过建立力学模型,分析了服役工况下不同因素对出料管的受力作用及应力大小。结果表明,熔融高放废液玻璃固化料静水压力作用和玻璃固化料及出料管自重作用导致的出料管最大拉应力,远小于出料管不同服役温度时对应的拉伸强度,其对出料管破裂风险影响极低。出料管在停止出料阶段,同时承受固化料对其作用的静水压力和内外壁温差导致的热应力叠加作用,由此导致的最大拉应力分布在出料管内壁,且足以对出料管产生明显不利影响。通过对出料管内、外径进行优化设计,可降低服役过程中导致的最大拉应力值,从而保障出料管的安全可靠应用。     

颗粒弥散陶瓷的内应力分布及光弹性分析

本文详细分析了颗粒增强复相陶瓷内部的应力大小及分布状态，建立了单种颗粒及多种颗粒复合时瓷体的残余应力模型，并通过计算机模拟其应力的平面分布，采用光弹性应力分析加以验证．     

基于流固耦合作用的砂岩地浸采铀效果数值模拟分析

为探究低渗砂岩铀矿在不同因素下的产量变化情况,根据储层有效应力与渗流特性的关系,建立有效应力-渗流数值模型。通过日产水量分析流固耦合作用下储层的产量变化规律,并结合变异系数法分析注入压力、初始渗透率和井间距对产量的影响。研究表明：考虑流固耦合作用下的储层产量会更快进入稳定状态,产量更高;应力敏感性系数越大,有效应力减小对地层渗透率影响越明显。注入压力越大,地层有效应力减小区域下降幅度增大,使地层渗透率增大区域升高幅度增大,导致产量逐渐增多;流固耦合作用下产量随着初始渗透率增大而增多且增长速度较快;流固耦合作用下,随着井间距的增大,注采井间有效应力减小的影响减弱,注采井间渗透率增大趋势也在下降,导致产量逐渐降低。结合各因素变异系数变化可得,注入压力对产量效果影响更明显。本研究有助于建立完整的砂岩铀矿地浸采铀生产方案。     

非饱和粉土回弹模量的应力依赖性与水敏感性耦合分析

为了研究路基内部应力状态和含水率变化对回弹模量的影响,建立了路基土回弹模量的预估模型。根据室内三轴重复加载试验结果,研究了应力依赖性控制指标的选择,结果表明:体应力变化时,回弹模量不具有单调变化的规律,所以不宜作为应力依赖性的控制指标;而利用围压和偏应力作为控制指标时则能全面的反映回弹模量的变化规律。根据土水特征曲线,利用基质吸力表征含水率的影响,构建应力依赖性和水敏感性的耦合模型,并通过试验结果的拟合验证,发现该模型能够较好地反映回弹模量随应力水平和含水率变化的规律。     

The role of coping in the relationship between perceived racism and racism-related stress for Asian Americans: Gender differences.

On the basis of stress and coping theory, the authors examined coping as a mediator of the relationship between perceptions of racism and racism-related stress with a sample of Asian American college students (N = 336). Results indicated that coping mediated the relationship between racism and racism-related stress differentially by gender. The more that men perceived racism, the more likely they were to use support-seeking coping strategies that were associated with higher levels of racism-related stress. The more that women perceived racism, the more they used active coping strategies that were associated with higher levels of racism-related stress. The findings demonstrate how coping with racism differs for Asian Americans on the basis of gender. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

多孔PZT95/5铁电陶瓷的机械性能和铁电性能研究

采用添加造孔剂的方法制备多孔锆钛酸铅(PZT95/5)铁电陶瓷, 研究了孔结构包括孔隙率、孔径及孔形状对多孔PZT95/5陶瓷机械性能和电性能的影响及机理, 并揭示多孔PZT95/5陶瓷微观结构、机械性能和铁电性能的内在联系。研究表明: 孔隙率的增加降低了多孔PZT95/5陶瓷的声阻抗, 改善了陶瓷与封装材料的声阻抗匹配. 孔隙率增加, 多孔PZT95/5陶瓷的屈服应力和剩余极化强度降低, 矫顽场强增大。孔结构对多孔PZT95/5陶瓷屈服应力的影响可由应力集中理论解释; 多孔PZT95/5陶瓷剩余极化强度随孔结构的变化可用内应力结合空间电荷理论加以解释。     

翅片管路焊接接头断裂原因分析

通过KYKY2800扫描电镜等技术手段对翅片管路焊接接头进行失效分析。分析表明,焊缝与2#环管的焊趾处存在有不连续的咬边,造成应力集中;在交变应力的作用下于咬边处产生微裂纹,并沿一定方向扩展（同时材料的不均匀性也为裂纹的扩展提供了有利条件）,直至最后疲劳断裂,造成失效。最后提出了预防措施。     

摩托车离合器主轴断裂失效分析及其机理

本文分析了摩托车离合器主轴用材、金相组织、显微硬度以及断口扫描电镜(SEM)宏观、微观形貌,结果表明,该摩托车离合器主轴断裂主要原因是轴颈突变截面尖角顶端曲率半径ρ值太小,形成很大的应力集中从而形成裂纹源,然后裂纹逐步扩展造成的。     

Characterization of residual stresses from cold expansion using spatial statistics

Residual stress fields from cold expansion have been widely used to extend the fatigue life of aircraft structures. However, the spatial statistical character of these residual stress fields has not been established and has not been incorporated in current analysis methods. The objective of this study was to establish a spatial statistical method to quantify the residual stress field around a cold expanded hole. A framework called the Spatial Analysis of Residual Stress (SpARS) was developed utilizing spatial correlation, response surface modelling techniques and statistical resampling methods to characterize the residual stress field. Our results showed that tolerance bounds on residual stress can be quantified using this method. We also demonstrated the SpARS method using recently published round robin case studies. The newly developed model will be useful for aircraft structural fatigue crack growth analyses to incorporate residual stress fields for extending inspection intervals for fatigue and fracture critical structures.     

Improvement of Glycaemia and Endothelial Function by a New Low-Dose Curcuminoid in an Animal Model of Type 2 Diabetes

Curcumin has been suggested as a promising treatment for metabolic diseases, but the high doses required limit its therapeutic use. In this study, a new curcuminoid is synthesised to increase curcumin anti-inflammatory and antioxidant potential and to achieve hypoglycaemic and protective vascular effects in type 2 diabetic rats in a lower dose. In vitro, the anti-inflammatory effect was determined through the Griess reaction, and the antioxidant activity through ABTS and TBARS assays. In vivo, Goto-Kakizaki rats were treated for 2 weeks with the equimolar dose of curcumin (40 mg/kg/day) or curcuminoid (52.4 mg/kg/day). Fasting glycaemia, insulin tolerance, plasma insulin, insulin signalling, serum FFA, endothelial function and several markers of oxidative stress were evaluated. Both compounds presented a significant anti-inflammatory effect. Moreover, the curcuminoid had a marked hypoglycaemic effect, accompanied by higher GLUT4 levels in adipose tissue. Both compounds increased NO-dependent vasorelaxation, but only the curcuminoid exacerbated the response to ascorbic acid, consistent with a higher decrease in vascular oxidative and nitrosative stress. SOD1 and GLO1 levels were increased in EAT and heart, respectively. Altogether, these data suggest that the curcuminoid developed here has more pronounced effects than curcumin in low doses, improving the oxidative stress, endothelial function and glycaemic profile in type 2 diabetes.