硅酸盐富锌（水性）防腐涂料的研究

通过分析比较，找出制备硅酸盐富锌涂料的理想配方。试验检测表明：该涂层具有良好的附着力，较强防腐性能等。是一种很有发展潜力的防腐蚀涂料。     

纳米氧化锌对NR胶料性能的影响

研究纳米氧化锌等量或减量替代间接法氧化锌对NR胶料性能的影响。结果表明 ,当纳米氧化锌等量或减量 3 0 %替代间接法氧化锌应用时 ,胶料的焦烧时间和正硫化时间延长 ,抗硫化返原性能提高 ,硫化胶的邵尔A型硬度、3 0 0 %定伸应力和拉伸强度增大 ;当纳米氧化锌减量 60 %～ 80 %使用时 ,胶料的抗硫化返原性能下降 ,硫化胶的拉断伸长率和撕裂强度增大     

铜离子-氧化锌/十六烷基铵基吡啶-蒙脱石吸附大肠杆菌的能力

以蒙脱石(montmorillonite,MMT)、铜离子(Cu2 )、氧化锌(ZnO)和十六烷基铵基吡啶(cetylpyridinium,CP)为主要原料,制备了MMT基系列细菌吸附剂Cu2 -ZnO/CP-MMT,Cu2 -ZnO/MMT,ZnO/MMT和MMT,并比较它们吸附大肠杆菌(Escherichia coli,E.coli)的能力.结果表明:上述材料与E.coli作用1.5 h后均可达到吸附平衡,吸附率大小顺序为Cu2 -ZnO/CP-MMT＞Cu2 -ZnO/MMT＞ZnO/MMT＞MMT.介质的pH值、离子强度和吸附温度对MMT基矿物材料吸附E.coli的能力有不同程度的影响.MMT基矿物材料吸附E.coli为吸热过程,在实验温度范围内自发进行.     

Photocatalytic behavior of TiO_2 and ZnO prepared with different methods under ultraviolet and visible light irradiation

IntroductionIn recent years photocatalytic oxidation hasreceived considerable attention as an alternativeremediation technology since the method offers anumber of advantages over conventionaltechnologies [1,2] Elimination o…     

Anodic behavior and microstructure of Al/Pb-Ag-Co anode during zinc electrowinning简

In order to study the anodic behavior and microstmctures of A1/Pb-Ag-Co anode during zinc electrowinning, by means of potentiodynamic investigations, scanning electron microscopy （SEM） and X-ray diffraction （XRD） analyses, the mechanism of the anodic processes playing on the surface of A1/Pb-0.8%Ag and A1/Pb-0.75%Ag-0.03%Co anodes prepared by electro-deposition from methyl sulfonic acid bath for zinc electrowinning from model sulphate electrolytes have been measured. On the basis of the cyclic voltammograms obtained, information about the corrosion rate of the composite in PbO2 region has been concluded. The microstructures were also observed by means of SEM and XRD which showed Pb-0.75%Ag-0.03%Co alloy composite coating has uniform and chaotic orientation tetragonal symmetry crystallites of PbSO4, but Pb-0.8%Ag alloy composite coating has well-organized orientation crystallites of PbSO4 concentrated in the certain zones after 24 h of anodic polarization. It is important that Al/Pb-0.75%Ag-0.03%Co anode oxide film consists of non-conductive dense MnO2 and PbSO4 and a, fl-PbO2 penetrated into which, in fact, are the active centers of the oxygen evolution after 24 h of anodic polarization.     

Numerical simulation of atomic layer deposition for thin deposit formation in a mesoporous substrate

ZnO deposition in porous γ-Al₂O₃ via atomic layer deposition (ALD) is the critical first step for the fabrication of zeolitic imidazolate framework membranes using the ligand-induced perm-selectivation process (Science, 361 (2018), 1008–1011). A detailed computational fluid dynamics (CFD) model of the ALD reactor is developed using a finite-volume-based code and validated. It accounts for the transport processes within the feeding system and reaction chamber. The simulated precursor spatiotemporal profiles assuming no ALD reaction were used as boundary conditions in modeling diethylzinc reaction/diffusion in porous γ-Al₂O₃, the predictions of which agreed with experimental electron microscopy measurements. Further simulations confirmed that the present deposition flux is much less than the upper limit of flux, below which the decoupling of reactor/substrate is an accurate assumption. The modeling approach demonstrated here allows for the design of ALD processes for thin-film membrane formation including the synthesis of metal–organic framework membranes.     

Iron recovery from zinc mine tailings by magnetic separation followed by carbothermal reduction of self‐reducing briquettes

The volume of tailings produced by the extractive industry has been increasing due to the processing of the low‐grade ore. This issue can cause environmental accidents and require significant investment to control the disposal of tailings. Therefore, this study aims to recover iron from zinc mine tailings by wet magnetic separation followed by the carbothermal reduction of self‐reducing briquettes. Two magnetic separation routes were investigated to concentrate iron. Zinc mine tailings were processed by route I, in a rougher stage followed by a scavenger stage; and route II, in a rougher stage followed by a cleaner stage. The carbothermal reductions were performed using self‐reducing briquettes composed of Fe concentrate from the route with high Fe content and charcoal. The products were analyzed by scanning electron microscopy with energy dispersive spectroscopy (SEM‐EDS), x‐ray diffraction (XRD), inductively coupled plasma optical emission spectrometry (ICP‐OES), and volumetric chemical analysis. Magnetic separation route II provided the highest‐grade Fe concentrate, 52% Fe, while route I provided 33% Fe. In the carbothermal reductions, a metallization degree of 98% in the Fe concentrate briquette, 97% in the briquette with a 10% replacement of its raw material by Fe concentrate, and 99% in the hematite briquette was reached. The replacement of raw material by Fe concentrate showed no significant change in Fe recovery. Considering the whole process, magnetic separation and carbothermal reduction, the recovery of Fe from the zinc mine tailings was 67%. Therefore, the process route suggested in this study will not only reduce tailings disposal and consequently the risk of environmental accidents, but it will also provide profitable raw material for the steel industry.     

二乙二醇醚马来酸酯钙/锌热稳定剂的制备及应用研究

以马来酸酐和二乙二醇醚为原料在无催化剂条件下制得二乙二醇醚马来酸酯（MD）,此分子结构中具有酯基、醚键及碳碳双键,将此中间产物分别与乙酸钙、乙酸锌反应,制得二乙二醇醚马来酸酯钙/锌盐（MD?Ca/Zn）。通过傅里叶红外测试分析了热稳定剂产物的结构,分子中含有醚键、酯基、碳碳双键、羧酸盐结构,可作为PVC主效热稳定剂。通过刚果红法、热老化法、热失重法、电导率等检测方法,和市售硬脂酸钙/锌进行对比,验证了热稳定效果及性能,分析了热稳定机理,同时探究了与辅助热稳定剂β?二酮（硬脂酰苯甲酰甲烷）的协同作用。结果表明,当MD?Ca/Zn=2∶1（质量比,下同）时,对PVC的热稳定效果最好;初期白度可以达到40 min,静态热稳定时间为35 min;与热稳定剂总质量10 %的β?二酮复配后PVC的热稳定性能还可进一步提升。     

高铝锌基合金粉末冶金材料及其摩擦学特性初探

初步研究了高铝锌基合金的粉末冶金工艺及其材料的摩擦磨损性能。通过气喷气冷法制取合金粉末，用压制后真空烧结的方法制备高铝锌基合金粉末冶金材料。实验结果表明，高铝锌基合金的粉末冶金试样在干摩擦和油润滑条件下的磨损率及摩擦系数均小于同一合金的铸造试样，但其压溃强度有待提高。在实验的基础上还探讨了该材料的耐磨减摩机理     

Dissolution mechanism of solid nickel in liquid zinc saturated with Fe

The dissolution behavior of solid nickel in static liquid zinc saturated with Fe at 723 K was studied. The results show that when immersing solid Ni in liquid Zn saturated with Fe, the intermetallic compound layers consisted of γ and δ phases are formed on nickel substrate, which is the same as that in liquid pure zinc. However, some F2 particles are formed in the liquid near the solid/liquid interface. These Г2 particles can easily heterogeneously nucleate on （particles and grow fast. The dissolution process is governed by diffusion of nickel atom across a concentration boundary layer in liquid Zn saturated with Fe, and is different from a mixed control mechanism of nickel in liquid pure zinc. The participation of Г2 particles makes the dissolution of solid Ni in the liquid accelerated.