钢水钙基脱硫剂的应用探讨

在钢铁市场面临激烈竞争的形势下,用户对产品质量,品种的要求不断提高。深脱硫已经成为提高钢质量、扩大品种和开拓钢材市场的重要手段。针对钢水钙基脱硫剂的文献研究中,并对其学者的文献和观点进行归纳和总结,找出提高钢水快速脱硫的途径。     

水气分离集成井降水强夯法试验研究

为了克服降水强夯法处理深度小、降水时间长的缺陷,结合扬中灏港通用码头软土地基处理工程,改进了传统降水强夯工艺,采用水气分离集成井降水联合强夯法进行加固处理。通过在常规真空井点降水强夯和改进降水强夯两个试验区开展现场监测和检测试验,对加固效果进行了对比评价分析,研究结果表明:水气分离集成井降水强夯工艺降水深度可达地表以下5~6 m,夯后孔压消散时间约为1~2天;地基加固后总地表施工期最大沉降量为0.606 m,可有效减小工后沉降;与常规井点降水强夯法相比,改进法加固后土体强度和地基承载力均有较大提高,地基加固效果优势明显。     

Preparation and properties of a long-life cementbased mortar used on metal oilcans

Organic-based materials are often used as the coating of metal oilcans. But they need to be sprayed several times in the whole life of oilcans because of the short-life of organic components. To overcome this problem, a type of long-life flexible cement-based anti-corrosion material used on the surface of metal oilcans was developed according to the principle that the steel reinforced concrete can remain the same life with buildings. The materials with different formulas composed of acrylic ~nulsion, cement and other additives were prepared. Because the ratios of polymer to cement played the decisive role in the adhesion and anti-corrosion characteristics, their effects on the physical performances were investigated by comparing the mechanical properties, anti-corrosion and anti-aging properties. The relationship between microstructure and macroscopic properties was also discussed.     

我校学报影响因子和总被引频次继续提升

正根据2013年中国科学技术信息研究所统计结果:我校学报2012年影响因子为0.663,比2011年提升30%,在34种石油天然气工程类期刊中排名16;我校学报2012年总被引频次为928次,比2011年提升10%,在34种石油天然气工程类期刊中排名18.     

Preparation and characterization of PEGDE crosslinked silk fibroin film

To obtain water-insoluble silk fibroin(SF) materials, polyethylene glycol diglycidyl ether(PEG-DE) was selected as a crosslinking agent to prepare SF films(blends). The reaction conditions were optimized for the crosslinking of the SF molecules. The hot water stability of the blends was measured using BCA protein assay and gravimetric analysis. The molecular conformation and crystalline structure of the blends were analyzed by FTIR and XRD, respectively. When the mass ratio of SF:PEG-DE was 1.0:0.8, the hot water loss rate of the SF blends was minimized. PEG-DE could induce SF molecules to form β-sheets during the gel reaction process, resulting in improved crystallinity and hot water dissolved resistance of the blend films. In order to demonstrate the cytotoxicity of the chemical reagents used to crosslink SF, L929 cells were seeded on the blend film(SF:PEG-DE = 1:1) and cultured for 3 days. Cells of L929 readily adhered and spread in the fusiform on the blend film resulting in high cell viability. The extracted liquid from the SF porous film did not inhibit cell proliferation, as estimated by the MTT assay.     

树脂基复合材料固化过程中的温度和热应力场三维瞬态分析

建立了热固性树脂基复合材料固化过程温度和热应力场分析的数学模型,采用有限元方法,进行了三维非稳态数值求解。通过与已有实验结果的比较,验证了数学模型和计算方法的正确性。获得了3234/T300层合板固化过程中内部温度及热应力分布,分析了保温时间、升温速率、铺层设计等对温度、内部热应力的影响。数值计算结果表明:预固化时间越长,层合板内温度梯度越小,热应力峰值越低;升温速率越大,层合板内温度梯度越大,热应力峰值越大;采用对称铺层可降低层合板内部温度梯度和热应力。     

Hilbert空间中的g-Riesz基序列

在复Hilbert空间中,根据g-框架的概念及其相关性质,引进了g-Riesz基序列的概念,并得到了若干g-Riesz基序列的性质.另外,利用g-Riesz基序列的性质证明了g-Riesz基的稳定性.     

Thermo economic evaluation of oxy fuel combustion cycle in Kazeroon power plant considering enhanced oil recovery revenues简

Oxy fuel combustion and conventional cycle （currently working cycle） in Kazeroon plant are modeled using commercial thermodynamic modeling software. Economic evaluation of the two models regarding the resources of transport and injection of carbon dioxide into oil fields at Gachsaran for enhanced oil recovery in the various oil price indices is conducted and indices net present value （NPV） and internal rate of return on investment （IRR） are calculated. The results of the two models reveal that gross efficiency of the oxy fuel cycle is more than reference cycle （62% compared to 49.03%）, but the net efficiency is less （41.85% compared to 47.92%） because of the high-energy consumption of the components, particularly air separation unit （ASU） in the oxy fuel cycle. In this model, pure carbon dioxide with pressure of 20~ 105 Pa and purity of 96.84% was captured. NOx emissions also decrease by 4289.7 tons per year due to separation of nitrogen in ASU. In this model, none of the components of oxy fuel cycle is a major engineering challenge. With increasing oil price, economic justification of oxy fuel combustion model increases. With the price of oil at $ 80 per barrel in mind and $ 31 per ton fines for emissions of carbon dioxide in the atmosphere, IRR is the same for both models.     

Microstructure and properties of electronic packaging shell with high silicon carbide aluminum-base composites by semi-solid thixoforming

The electronic packaging shell with high silicon carbide aluminum-base composites was prepared by semi-solid thixoforming technique. The flow characteristic of the Si C particulate was analyzed. The microstructures of different parts of the shell were observed by scanning electron microscopy and optical microscopy, and the thermophysical and mechanical properties of the shell were tested. The results show that there exists the segregation phenomenon between the Si C particulate and the liquid phase during thixoforming, the liquid phase flows from the shell, and the Si C particles accumulate at the bottom of the shell. The volume fraction of Si C decreases gradually from the bottom to the walls. Accordingly, the thermal conductivities of bottom center and walls are 178 and 164 W·m-1·K-1, the coefficients of thermal expansion（CTE） are 8.2×10-6 and 12.6×10-6 K-1, respectively. The flexural strength decreases slightly from 437 to 347 MPa. The microstructures and properties of the shell show gradient distribution.     

油基钻井液组分对体系沉降性能的影响

研究了油基钻井液组分对其沉降稳定性能的影响。结果表明,基液类型、油水体积比、内相盐种类、加重材料粒径大小和种类会对油基钻井液的沉降稳定性能产生影响。静态沉降条件下基液黏度越大,体系油水体积比越小,体系沉降稳定性能越好。以NH4Ca(NO3)3为内相的油基钻井液体系沉降稳定性能优于甲酸盐、氯化钙和氯化钠内相钻井液体系。加重材料颗粒的粒径越小,沉降稳定性能越好,动态剪切和静态沉降条件下Mn3O4为加重材料的油基钻井液沉降稳定性能都优于其他加重材料体系。