Cationic ring-opening polymerization of hexamethylcyclodisilazane: General aspects and tentative mechanisms

The ring-opening polymerization of hexamethylcyclodisilazane (D_2NMe), initiated by methyl triflate in 1,2-dichloroethane, forms in the first, fast kinetic step both linear polymer and cyclic dimer (D_4NMe). Subsequently a slow depolymerization process occurs leading to exclusively cyclotrisilazane (D_3NMe). On the basis of kinetic measurements carried out using an adiabatic calorimetric technique and complementary experiments, mechanisms of both propagation, cyclization and back-biting reactions are proposed. The influence of the reaction temperature was also studied; it is demonstrated that, at low temperature, polymerization does not lead to cyclic oligomer formation. In such conditions, the polymerization presents a ‘living’ character.     

A reactive molecular dynamics model of thermal decomposition in polymers: I. Poly(methyl methacrylate)

The theory and implementation of reactive molecular dynamics (RMD) are presented. The capabilities of RMD and its potential use as a tool for investigating the mechanisms of thermal transformations in materials are demonstrated by presenting results from simulations of the thermal degradation of poly(methyl methacrylate) (PMMA). While it is known that depolymerization must be the major decomposition channel for PMMA, there are unanswered questions about the nature of the initiation reaction and the relative reactivities of the tertiary and primary radicals formed in the degradation process. The results of our RMD simulations, performed directly in the condensed phase, are consistent with available experimental information. They also provide new insights into the mechanism of the thermally induced conversion of this polymer into its constituent monomers.     

Synthesis of ZSM-5 zeolite membranes without organic templates using a varying-concentration technique

Template-free nanosized ZSM-5 seeds with an average size of 15 nm were prepared from a synthesis solution with the composition 12Na2O:100SiO2:2Al2O3:2500H2O. By the use of these seeds, thin ZSM-5 zeolite membranes were prepared on the outer surface of a porous α-alumina tube with a pore size of 2 μm in a gel system by varying-concentration synthesis with organic-free template. The first composition synthesis sol-gel was the same as seeds of molar composition and the second one was 12Na2O:100SiO2:2Al2O3:5000H2O at 180 ℃ for 10 h, respectively. XRD shows that the film consists of well-crystallized ZSM-5 zeolite. SEM investigation indicats that the zeolite films on the supports are defect free and the film thickness is approximately 8 μm. The permeances for H2, N2, CH4 and CO2 are 8.94×10-7 , 3.27×10-7 , 3.9×10-7 , 3.14×10-7 and 0.874×10-7 mol·m2·s-1·Pa-1 , respectively. The ideal selectivity of membrane at room temperature for H2/CO2, H2/N2, H2/CH4 are 2.84, 2.73 and 2.29, respectively.     

纳米镓/聚甲基丙烯酸甲酯复合材料的原位超声合成与表征

超声作用于低熔点金属镓,使其超细化为纳米级的镓粒子,并采用无引发剂的乳液聚合方法制备出GA/聚甲基丙烯酸甲酯(PMMA)纳米复合粒子,并分析了其微观结构。结果表明纳米镓的形态和结构因有无表面改性剂而不同;乳液聚合得到的纳米镓复合粒子是核壳结构型,粒子大小为50~80 NM,内核金属镓粒径为30~50 NM,与聚合物存在一定的化学作用。     

P油田长4+52小层孔隙度三维模型的建立

为了更准确的评价P油田主要产层长4 52小层的储集能力，以随机模拟建模方法对该层的孔隙度进行研究，建立孔隙度分布三维模型。研究表明，长4 52小层属于低孔储层，平均孔隙度为11．85％。根据P油田储层物性分类原则，该储层在本区分布较为广泛，是今后挖潜的重点。     

Preparation and properties of silicone‐containing poly(methyl methacrylate) gels

Poly(methyl methacrylate) (PMMA) gels with varying amounts of silicone and solvent and constant amounts of crosslinker were prepared by solution free radical crosslinking copolymerization of methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDM), tetraethoxysilane (TEOS) and vinyltriethoxysilane (VTES) comonomer systems. They were then studied in benzene at a total monomer concentration of 3.5 mol L^?1 and 70 °C. The conversion of monomer, volume swelling ratio, weight fraction and gel point were measured as a function of the reaction time, silicone concentration and benzene content up to the onset of macrogelation. Structural characteristics of the gels were examined by using equilibrium swelling in benzene, gel fraction and Fourier‐transform infrared (FTIR) analysis. The morphology of the copolymers was also investigated by SEM. Based on the obtained results, it was concluded that the FTIR data did not have the capacity to show the presence of the VTES or TEOS moiety in these kinds of copolymers. On the other hand, the variation of weight fraction of gel, W_g, and its equilibrium volume swelling ratio in benzene, q_v, exhibited the same behaviour as that of MMA/EGDM copolymers. Also, the dilution of the monomer mixture resulted in an increase in the gel point and swelling degree and a decrease in the percent of conversion and gel fraction. Finally, TEOS is not an ideal silicone compound for reaction in the MMA/EGDM copolymerization system, whereas VTES is a suitable silicone comonomer for this system and it has been proved useful. Copyright © 2005 Society of Chemical Industry     

Yeast mutants with increased bacterial transposon Tn5 excision

Five complementing recessive mutations that exhibit increased bacterial transposon Tn5 precise excision in yeast Saccharomyces cerevisiae were obtained by ethylmethanesulfonate treatment. One of these mutations (tex1) was submitted to extensive genetic analysis. tex1 is a recessive temperature-sensitive mutation resulting in a 20-100-fold increase in Tn5 excision. It also has increased frequencies of ochre mutation reversion, of forward mutation to canavanine resistance, and loss of chromosome III or its right arm. The possible mechanism of tex1 effects is discussed.     

Effect of temperature on methyl radical generation over Sr/La2O3 catalysts

The role of gas phase CH₃ radicals in the oxidative coupling of CH₄ over 1 wt% Sr/La₂O₃ is supported by the observations that (i) this is a very effective catalyst for the generation of CH₃ · radicals and (ii) the concentration of CH₃ · radicals increases with temperature over the range of 450 °C–800 °C.     

锆(Ⅳ)-3,5-diBr-PADAP-安替比林三元配合物的分光光度研究与应用

本文提出在安替比林存在下,以3,5-diBr-PADAP为显色剂,分光光度测定微量锆的新方法。在pH1～2的HCl介质中,锆(W)与试剂和安替比林形成配合比为1:1:1的红色三元配合物,最大吸收值在615nm波长处,摩尔吸光系数ε=1.35×10~5。锆(Ⅳ)量在0～25μg/25ml范围内,遵守比尔定律。方法简单、快速、准确。若采用钽试剂—苯萃取法分离共存离子,可适用于钽铌矿和合金中痕量锆的测定。     

4-氨基-3-肼基-5-巯基-1,2,4-三唑的合成及其对醛的检验

以硫脲和水合肼合成了可用于检验醛的试剂——4-氨基-3-肼基-5-巯基-1，2，4-三唑(别名：紫醛)，其结构通过红外光谱、核磁进行了确定。试验表明，紫醛对醛的检验敏感、专一、快速、操作简单。