Organizational climate in air traffic control Innovative preparedness for implementation of new technology and organizational development in a rule governed organization

A positive and innovative organizational climate is of great importance in order to manage and adapt to change. Such a climate seldom evolves in organizations closely governed by rules and regulations. Because of ongoing organizational and technical changes within the Swedish Air Navigation Services Provider, a study concerning the organizational climate for changes and innovations was conducted to investigate the organization's capacity to cope with changes. Study locations were the two Swedish main air traffic control centers and parts of the civil aviation administration headquarters. In the study 390 subjects took part and the CCQ questionnaire was used to measure the organizational climate. The results show that the organizational climate is quite positive despite the rule-governed work. The results also show that administrative personnel assess the organizational climate as more positive than operative personnel. Comparisons between management positions did not result in any differences.     

Experimental research on inorganic solidified foam for sealing air leakage in coal mines

In order to efficiently seal air leakages and control spontaneous combustion of coal, solidified foam was developed by adding a certain compound additive to fly coal ash and cement as the main materials. It was prepared basing on the foaming characteristic through physical and mechanical system. We studied the effects of the different types of foaming agents, the mass ratio of cement to fly ash, and the mass ratio of solid to water and content of cellulose on the performance of solidified foam. The results show that when adding the composite protein, surfactant and cellulose foaming agents. The cement-fly ash ratio of 0.75:1, the water solid ratio as large as 2:1, and the solidified foam with high properties and density of only 516 kg/m³ and compressive strength of up to 12.68 MPa were prepared. But the initial setting time, identity and compressive strength may be changed by varying the water solid ratio and/or the additives. We theoretically analyzed the influence mechanism of foam density, compressive strength and water solid ratio. The solidified foam is especially suitable for sealing surface leakage channels and filling the goaf with a wide application prospects.     

管道充水过程气液两相流动力学特性分析

管道充水过程涉及复杂的气液两相瞬变过程,合理分析、评价其两相动力学特性对工程的优化设计、安全运行,以及数值模拟研究具有重要意义。基于量纲分析和相似理论,建立了充水过程的气相模型相似律,认为通气孔排气过程的动力相似律可近似套用重力相似律,据此推导出了管内滞留气囊原、模型的几何比尺关系。将建立的气相模型相似律应用于南水北调北京段西四环暗涵通气孔水工模型试验,分析了充水全过程中两相流各动力学测量参数,得出暗涵合理的充水流量。最后采用定量和定性分析相结合的方法,对管道中滞留气囊对输水能力的影响进行了评价。     

对预警探测雷达模拟器目标分辨率模型的校验方法的研究

预警探测雷达模拟器目标分辨率设置会影响目标数量的探测,分辨率错误会产生与实体雷达不一致的虚警和漏警,影响预警探测雷达模拟器的逼真度。本文首先从理论上分析了对目标分辨率模型进行校核应该注意的几个方面,然后研究了用来测试验证目标分辨率模型的空情想定的设计方法,通过对预警探测雷达模拟器目标分辨率模型进行校验,可以有效提高模型的仿真效果。     

Destruction of trichloroethylene (TCE) and trichloromethane (TCM) in the presence of selected VOCs over Pt-Pd-based catalyst

Catalytic oxidation of trichloroethylene (TCE) and trichloromethane (TCM) oxidized alone and in two-component mixtures with selected volatile organic compounds (VOCs) such as toluene, n-hexane, ethanol or acetone was investigated over a Pt-Pd-based catalyst on a monolithic, metallic, γ-Al₂O₃-washcoated support. TCE and TCM were more difficult to oxidize than VOCs and temperatures of their 50% conversion (T_50%) amouted to 420 and 330 °C, respectively. All the VOCs added were found to enhance the conversion of the two chlorinated compounds, drecreasing T_50% by 20 °C, at the most, for TCM in the presence of toluene and by 50 °C for TCE in the presence of acetone. Both the chlorinated compounds lowered the conversion of the VOCs added (except that of toluene), and this lowering was particularly distinct with n-heptane; they also raised the concentration of acetaldehyde formed during the oxidation of oxyderivative compounds.     

空冷塔堵塞导致分子筛带水的原因及处理

KDN-6000型空分设备运行中因空冷塔塔板被脏物堵塞,发生分子筛纯化系统带水故障;采取相应的处理措施维持空分设备的运行;按计划停运空分设备后,清洗空冷塔,彻底排除故障。     

制约空压机长周期运行的因素及处理措施

通过对引进C150MX3型空压机近几年来的运行和故障情况的分析，得出制约空压机长周期运行的3个因素：冷却器结垢、扩压器腐蚀和二级振动值高。分析了引起故障的原因，并采取了相应措施，实现空压机长周期稳定运行。     

离心式空压机轴瓦振裂的原因与处理

简介了6000m^3／h空分设备配套的H820．6．1／0．85型离心式空压机轴承结构、润滑系统和运行参数，介绍了轴瓦振裂的现象，并分析了原因，阐述了采取的处理措施、效果以及从中得到的教训。     

Influence of aluminum ions implanted on oxidation behavior of ZIRLO alloy at 500 °C

The beneficial effect of aluminum ion implantation on the oxidation behavior of ZIRLO alloy at 500 °C has been studied. ZIRLO alloy specimens were implanted with aluminum ions with fluence range from 1×10¹⁶ to 1×10¹⁸ ion/cm², using a MEVVA source at an extraction voltage of 40 kV at maximum temperature of 380 °C. The weight gain curves were measured after being oxidized in the air at 500 °C for 120 min, which showed that a significant improvement was achieved in the oxidation behavior of ZIRLO alloy implanted with aluminum compared with that of the virgin ZIRLO alloy. It has been obviously found that when the fluence is 1×10¹⁸ ion/cm², the oxidization of the implanted ZIRLO alloy is reduced into 30% of the virgin ZIRLO alloy.     

小型一体化PLC在气箱式脉冲袋收尘器中的应用

采用HOLLiAS—LEC G3小型一体化PLC对气箱式脉冲袋收尘器的控制系统进行了改造，提高了控制系统的稳定性和灵活性。