SBS的环氧化研究

通过红外光谱对SBS的环氧化产物中环氧基团的存在进行证实。考察了SBS环氧化反应合成条件的影响因素：反应时间，反应温度，SBS的浓度，甲酸，过氧化氢。     

制造泡沫玻璃的方法与模具

将泡沫玻璃配合料制备成块状物,将配合料块按规定间隙在模具中平铺码放并烧成,使配合料块熔为一体,形成较小变形的平板状泡沫玻璃.其制造模具是由底板、上盖及L型围板构成的箱型结构,模具各部位通过V字沟相互联结,保证各部位能自由地附着和脱离.模具多层码放烧制,模具间必须设置间隙.在模具上设置通孔可以有效地抑制膨胀过量问题.     

Synthesis and surface characterization of poly(methyl methacrylate)‐block‐polydimethylsiloxane copolymers from macroazoinitiator

Poly(methyl methyacrylate)‐block‐polydimethylsiloxane (PMMA‐b‐PDMS) copolymers with various compositions were synthesized with PDMS‐containing macroazoinitiator (MAI), which was first prepared by a facile one‐step method in our lab. Results from the characterizations of X‐ray photoelectron spectroscopy (XPS), contact angle measurements, and atomic force microscopy (AFM) showed that the copolymer films took on a gradient of composition and more PDMS segments enriched at the film surfaces, which then resulted in the low surface free energy and little microphase separation at the film surfaces. By contrast, transmission electron microscopy (TEM) analysis demonstrated that distinct microphase separation occurred in bulk. Slight crosslinking of the block copolymers led to much steady morphology and more distinct microphase separation, in particularly for copolymers with low content of PDMS. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Shear-rate dependence of first normal stress difference of poly(isoprene-b-styrene) in solution near the order-disorder transition temperature

Viscoelastic properties of poly(isoprene-b-styrene) in dioctylphthalate under steady shear flow were measured near the order—disorder transition temperature. In ordered states, first normal stress difference N₁ is proportional to shear rate at low region, but becomes proportional to at the high region, similar to the N₁ behaviour of polymer blends undergoing shear-induced homogenization. Because the existence of microdomains was confirmed at the high region by the flow birefringence method, it is concluded that the above N₁ behaviour is not caused by shear-induced homogenization, but is probably caused by the shear-induced alignment of the microdomain structure.     

Phase separation in polymer blends comprising copolymers: 6. Effect of molecular architecture of block copolymers

To study the effect of the molecular architecture of a copolymer on its miscibility with corresponding homopolymers a series of block copolymers of styrene and isoprene with diblock, triblock and four-arm star architectures have been prepared and the morphologies of the blends of the copolymers and polyisoprene with different molecular weights have been examined by electron microscopy. The results show that miscibility varies in the sequence diblock>triblock>four-arm star copolymers. This sequence is in the opposite direction to the variation of the architectural complexity of the block copolymers, i.e. the more complex is molecular architecture, the greater is conformation restriction in microdomain formation and the less is solubility of homopolymer in corresponding domains.     

Preparation and characterization of amphiphilic block copolymer of polyacrylonitrile‐block‐poly(ethylene oxide)

The synthesis of polyacrylonitrile‐block‐poly(ethylene oxide) (PAN‐b‐PEO) diblock copolymers is conducted by sequential initiation and Ce(IV) redox polymerization using amino‐alcohol as the parent compound. In the first step, amino‐alcohol potassium with a protected amine group initiates the polymerization of ethylene oxide (EO) to yield poly(ethylene oxide) (PEO) with an amine end group (PEO‐NH₂), which is used to synthesize a PAN‐b‐PEO diblock copolymer with Ce(IV) that takes place in the redox initiation system. A PAN‐poly(ethylene glycol)‐PAN (PAN‐PEG‐PAN) triblock copolymer is prepared by the same redox system consisting of ceric ions and PEG in an aqueous medium. The structure of the copolymer is characterized in detail by GPC, IR, ¹H‐NMR, DSC, and X‐ray diffraction. The propagation of the PAN chain is dependent on the molecular weight and concentration of the PEO prepolymer. The crystallization of the PAN and PEO block is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1753–1759, 2003     

碳化钙气压法快速测定砌块含水率

开发新型工程现场快速检测砌块含水率方法,与传统的烘箱干燥方法进行比较,开展了工程现场试验,研究了在上海地区自然干燥环境条件下不同砌块墙面、朝向、砌块深度等对砌块含水率变化的影响。研究表明,该方法测试结果可信、操作方便,可用于现场快速检测。     

混凝土小型空心砌块专用混合砂浆的配制

针对混凝土小型空心砌块的特点,配制出专用混合砂浆.该砂浆未添加外加剂,便于建筑施工.实验结果表明该混合砂浆和易性能良好.该配合比可以作为基准配合比供其它工程借鉴、使用.     

OFDM系统相关矩阵的分块结构及同步算法

根据载波加权可增强OFDM系统周期平稳性,实现系统盲同步的基本原理,分析了OFDM系统相关矩阵的分块结构,给出相应系统的盲同步算法.该方法通过检测相关矩阵的分块Toep litz矩阵结构,实现系统定时和载频偏差的估计.同时,在特定系统同步性能交换误码率的情况下通过分析载波加权、系统误码率和载频同步误差之间的互相制约关系,进一步给出了载波加权的确定方法.实验仿真结果表明,采用分块相关矩阵的同步方案与采用循环谱的同步方案相比,可获得更好的系统载频和定时同步效果.     

气动螺丝刀传动活块加工工艺分析与加工工艺

通过对气动螺丝刀传动活块加工工艺进行分析,提出了该零件的加工工艺,在普通立式铣床上加工出合格的零件,解决了进口气动工具无配件的问题。