手套箱气氛中氚化水处理的工艺研究

分子筛吸附柱和热金属镁床是手套箱气氛中氚化水 (HTO)搜集和分解处理的一种有效手段。测试了分子筛柱对气氛中水的吸附性能和热金属镁床对HTO的分解性能。结果表明 :分子筛柱对气氛中水的吸附效率 >99 99% ,在空气中水含量为 3 4× 1 0 - 3～ 4 2× 1 0 - 3条件下 ,未发现吸附柱水的贯穿现象 ;热金属镁床对HTO的分解率 >99 9% ,当金属镁的消耗量大于 80 %时 ,未见分解率明显降低。     

应用底饲回燃循环流化床技术改造东锅DG35/3.82-7型流化床锅炉

采用飞灰循环底饲回燃技术改造西南合成制药总厂热电分厂、天府矿务局磨心坡发电厂2台东方DG35/3.82-7型低倍率循环流化床锅炉。改造后运行结果表明,锅炉可长期、稳定运行,尾部飞灰可燃物含量大幅度降低,锅炉蒸发量提高20％左右,节煤效果明显。为燃用贫煤、无烟煤和煤矸石等劣质燃料且锅炉炉膛高度较低的电站技改,提供了一种切实可行的方法。     

高频等参数感应(ВИКИЗ)测井技术应用

介绍了高频等参数感应的基本原理。以胜利油田比较典型的 3口井为例 ,详细分析了高频感应资料在划分薄夹层、确定储层流体饱和类型、评价储层电阻率空间分布等方面的应用。研究结果表明 ,高频感应具有极高的纵向分辨率和较好的径向探测特性 ,能够准确计算地层真电阻率、侵入带电阻率及侵入半径 ,通过与常规感应及薄层测井资料的对比 ,论证了高频等参数感应在测井技术应用上的优越性     

我国煤炭生产的环境问题及其对策研究

论文分析了我国煤炭生产中所存在的环境问题 ,并提出采取应用全面绿色管理、贯彻实施ISO14 0 0 0系列标准及推广应用清洁生产等对应措施和方法。其中全面绿色管理是作者首次提出的全新概念。     

A study of solid circulation rate in a circulating fluidized bed

An experimental investigation under cold condition was made to study the effects of some operating/design parameters and non-mechanical L valve configuration on the solid circulation rate in a 4.5 m tall, 0.15 m diameter circulating fluidized bed with riser flow rate varying from 1400 litres/min to 2000 litres/min and bed inventory from 15 kg to 25 kg of sand of average sizes 200 μm, 400 μm and 500 μm. Solid circulation rate was estimated by measuring velocity of sand particle travelling through a vertical Perspex tube section at the bottom of the return leg. It was found to be in the range of 2.8 to 12.3kg/m²s, 0.07 to 9.1kg/m²s and 0.12 to 2.23kg/m²s for sand sizes of 200 μm, 400 μm and 500 μm, respectively for a horizontal L valve. Two mathematical correlations have been developed from the experimental results to predict solid circulation rate as a function of riser flow rate, aeration flow rate, total bed inventory and particle size used.     

Monte Carlo simulations to determine coating uniformity in a Wurster fluidized bed coating process

This paper presents a coating model to predict the mass coating uniformity in a Wurster fluid bed coater using a Monte Carlo method. The velocity and voidage data obtained using imaging techniques on the same Wurster coater are used as inputs to the model. The semi-circular Wurster fluid bed used in this work was 22.9 cm in diameter. A batch of 3.6 kg tablets was used to conduct coating experiments and the coating weight gain distribution results were compared to predictions from the simulation. The model rigorously considers the sheltering effect of particles as they move in the spray zone. Good agreement was obtained when comparing the results with an analytical model.Spray shape and orientation of discretization were found to play an important role in predicting the coating uniformity. A simple spray experiment in a particle-free bed showed that the direction of spray material, in general, was vertically upward. Simulation results confirmed that an upward cylindrical spray model gives better agreement with experimental results compared to a solid cone spray model. Finally, the model was used to predict the changes in coating uniformity with bed operating conditions such as gas velocity and gap height. A wider coating distribution was found for the case with the lower gas velocity and gap height.     

长江口北支水道水沙特性分析

从实测资料出发,结合水流数值计算成果,对长江口北支水道的水流、泥沙和含盐度等资料进行分析,得出了北支水道的水沙特性,并分析了水沙变化与河床变化的相互关系.北支水道在1958年南通河段河势控制后,径流分流比逐年下降,并渐趋稳定于3%左右.北支水道受径流影响越来越小,主要受潮流作用.随着水沙特性的逐年变化,北支水道0 m以下槽蓄容量逐年减小,并渐趋稳定,北支上段为逐年淤积最快的区域.由此反过来影响了水沙条件的进一步变化,使北支上段平均潮差增加,北支的会潮点由崇头附近下移至青龙港附近.     

Spouted and spout-fluid bed combustors 1: Devolatilization and combustion of coal volatiles

The devolatilization and volatile combustion of a single coal particle in spouted and spout-fluid beds have been studied. The results showed that the flame extinction time increases with the particle diameter, and decreases with the bed temperature. When the bed temperature and the air flow rate were fixed, the operation modes (spouted or spout-fluid bed) showed less effect on the mean flame extinction time. A mathematical model of the spouted bed mode for preignition and postignition periods has also been developed assuming the devolatilization rate to be controlled by heat transfer and multireaction pyrolysis kinetics based on volatile products. Ignition, heat transfer back from the volatile flame to the particle surface, variation in flame temperature, and the hydrodynamics of SB are taken into account. The model predictions, with some adjusting parameters, were in good agreement with experimental results.     

卸煤机走行部的技术改造

通过对卸煤机走行部的技术改造,提高了工作效率,节省了维修费用。     

非均相成核中间相炭微球的形成过程及其结构演变

以含有喹啉不溶物的煤焦油沥青为原料，在410℃、不同反应时间下获得一系列中间相炭微球(MCMB)和小于0．5μm的碳质颗粒(SCP)。通过对中间相沥青的软化点、族组成和MCMB、SCP的形貌及MCMB断面结构的分析，认为非均相成核MCMB的形成和生长过程不同于均相成核的融并生长过程，而是SCP碳质颗粒的构筑过程，我们称之为“球形基本单元构筑”过程。在MCMB生长过程中，体系的黏度对SCP的形成和MCMB的生长起着重要的作用。非均相成核MCMB的内部结构不是三种模型结构(“地球仪”型、“洋葱”型和“同心圆”型)中的任一种，而是炭层具有收缩点的复杂结构，并且球体的结构不具有“继承性”，即随着反应时间的延长而不断发生变化和调整。MCMB内部分子在球体生长过程中的主要变化趋势是分子的不断缩合长大，而不是分子片层的平行趋向。