采用轴径向技术有效解决固定床反应器阻力降的快速升高

讨论了固定床反应器阻力降快速升高的原因，介绍了用轴径向技术解决这一问题的原理及优点，及其在铁铬系变换催化剂和钴钼系耐硫变换催化剂反应器中的实际应用。     

Valley floor landscape change following almost 100 years of flood embankment abandonment on a wandering gravel‐bed river

Critical to restoring the nature conservation value of many river corridors is an understanding of how alluvial landscapes will respond to cessation of river management and land use practices that have previously degraded the environment. This paper analyses changes in valley floor landforms and vegetation patch dynamics, in relation to fluvial disturbance, over a period of almost 100 years following flood embankment abandonment on a wandering gravel‐bed river, namely the River Tummel, Scotland. Such rivers were once typical of many draining upland areas of northern maritime Europe. Prior to abandonment the valley floor landscape was agriculturally dominated and the river for the most part was single thread confined between flood embankments. The pattern of landform change and vegetation patch development over time following a decision in 1903 not to maintain embankments was tracked by geomorphic and land cover mapping utilizing successive sets of aerial photography for the period 1946 to 1994. A historical context for these changes was also feasible because the channel planform in 1900 and earlier channel planform changes dating back to 1753 were known due to the availability of old maps and earlier geomorphic studies. The land cover mapping was validated by comparison of results produced from the interpretation work on the 1994 aerial photographs with the field‐based UK National Vegetation Classification protocol. The findings of the study illustrate that bordering the River Tummel fluvial landforms and vegetation patch mosaics, presumably resembling those that occurred before valley floor land use intensification, evolved in less than 50 years after flood embankment abandonment with a resultant increase in habitat diversity. The change relates primarily to flood‐induced channel planform change and moderate levels of fluvial disturbance. The general significance of this change to plant species diversity on the valley floor of the River Tummel and elsewhere is discussed as is possible implications of the upstream impoundment and scenarios for climatically induced changes in flood frequency and magnitude. The overall outcome is the strong possibility that simple changes in river management and land use practices could result in re‐establishment of the nature conservation value of similar river corridors in Europe over the medium term without active restoration efforts. Copyright © 2002 John Wiley & Sons, Ltd.     

手套箱气氛中氚化水处理的工艺研究

分子筛吸附柱和热金属镁床是手套箱气氛中氚化水 (HTO)搜集和分解处理的一种有效手段。测试了分子筛柱对气氛中水的吸附性能和热金属镁床对HTO的分解性能。结果表明 :分子筛柱对气氛中水的吸附效率 >99 99% ,在空气中水含量为 3 4× 1 0 - 3～ 4 2× 1 0 - 3条件下 ,未发现吸附柱水的贯穿现象 ;热金属镁床对HTO的分解率 >99 9% ,当金属镁的消耗量大于 80 %时 ,未见分解率明显降低。     

应用底饲回燃循环流化床技术改造东锅DG35/3.82-7型流化床锅炉

采用飞灰循环底饲回燃技术改造西南合成制药总厂热电分厂、天府矿务局磨心坡发电厂2台东方DG35/3.82-7型低倍率循环流化床锅炉。改造后运行结果表明,锅炉可长期、稳定运行,尾部飞灰可燃物含量大幅度降低,锅炉蒸发量提高20％左右,节煤效果明显。为燃用贫煤、无烟煤和煤矸石等劣质燃料且锅炉炉膛高度较低的电站技改,提供了一种切实可行的方法。     

煤层防塌钻井液技术

从煤层岩的强度等力学性能和化学结构、密度、亲油亲水性等理化性能综合分析了塔里木盆地依奇克里克区块煤层坍塌的机理，确定了防塌措施，用封堵实验法考查了粒径、温度、封堵剂种类与加量等因素对钻井液封堵防塌性能的影响，优选出的煤层防塌钻井液技术配方，在依西-1井、依南-4井等井的现场应用中取得了较好的煤层防塌效果，井径规则，起下钻，电测，取心，下套管，固井作业均顺利。     

高频等参数感应(ВИКИЗ)测井技术应用

介绍了高频等参数感应的基本原理。以胜利油田比较典型的 3口井为例 ,详细分析了高频感应资料在划分薄夹层、确定储层流体饱和类型、评价储层电阻率空间分布等方面的应用。研究结果表明 ,高频感应具有极高的纵向分辨率和较好的径向探测特性 ,能够准确计算地层真电阻率、侵入带电阻率及侵入半径 ,通过与常规感应及薄层测井资料的对比 ,论证了高频等参数感应在测井技术应用上的优越性     

我国煤炭生产的环境问题及其对策研究

论文分析了我国煤炭生产中所存在的环境问题 ,并提出采取应用全面绿色管理、贯彻实施ISO14 0 0 0系列标准及推广应用清洁生产等对应措施和方法。其中全面绿色管理是作者首次提出的全新概念。     

A study of solid circulation rate in a circulating fluidized bed

An experimental investigation under cold condition was made to study the effects of some operating/design parameters and non-mechanical L valve configuration on the solid circulation rate in a 4.5 m tall, 0.15 m diameter circulating fluidized bed with riser flow rate varying from 1400 litres/min to 2000 litres/min and bed inventory from 15 kg to 25 kg of sand of average sizes 200 μm, 400 μm and 500 μm. Solid circulation rate was estimated by measuring velocity of sand particle travelling through a vertical Perspex tube section at the bottom of the return leg. It was found to be in the range of 2.8 to 12.3kg/m²s, 0.07 to 9.1kg/m²s and 0.12 to 2.23kg/m²s for sand sizes of 200 μm, 400 μm and 500 μm, respectively for a horizontal L valve. Two mathematical correlations have been developed from the experimental results to predict solid circulation rate as a function of riser flow rate, aeration flow rate, total bed inventory and particle size used.     

������ú��������˲ʱѹ������

煤层气采出有扩散和渗流两个过程，比常规天然气层中的渗流方程复杂。煤层气由煤层流入井筒的过程为：随着煤层中水的不断采出，地层压力下降，吸附在煤层中的煤层气被解吸出来，并扩散至割理，割理中的气体渗流到达井筒。采用非平衡态吸附模型，研究单相煤层气在煤体和割理中的流动规律。在拟稳态流和不稳态流的数学模型假设下，用气体标准压力代替Ｌａｎｇｍｕｉｒ吸附公式中的压力，得到气层中标准压力所满足的方程。如果考虑无限大地层或有界圆形封闭和定压地层，最终得到井底无量纲准压力及其导数的解。     

Monte Carlo simulations to determine coating uniformity in a Wurster fluidized bed coating process

This paper presents a coating model to predict the mass coating uniformity in a Wurster fluid bed coater using a Monte Carlo method. The velocity and voidage data obtained using imaging techniques on the same Wurster coater are used as inputs to the model. The semi-circular Wurster fluid bed used in this work was 22.9 cm in diameter. A batch of 3.6 kg tablets was used to conduct coating experiments and the coating weight gain distribution results were compared to predictions from the simulation. The model rigorously considers the sheltering effect of particles as they move in the spray zone. Good agreement was obtained when comparing the results with an analytical model.Spray shape and orientation of discretization were found to play an important role in predicting the coating uniformity. A simple spray experiment in a particle-free bed showed that the direction of spray material, in general, was vertically upward. Simulation results confirmed that an upward cylindrical spray model gives better agreement with experimental results compared to a solid cone spray model. Finally, the model was used to predict the changes in coating uniformity with bed operating conditions such as gas velocity and gap height. A wider coating distribution was found for the case with the lower gas velocity and gap height.