Oil Spill Cleanup from Sea Water by Sorbent Materials

Three sorbents were compared in order to determine their potential for oil spill cleanup. Polypropylene nonwoven web, rice hull, and bagasse with two different particle sizes were evaluated in terms of oil sorption capacities and oil recovery efficiencies. Polypropylene can sorb almost 7 to 9 times its weight from different oils. Bagasse, 18 to 45 mesh size, follows polypropylene as the second sorbent in oil spill cleanup. Bagasse, 14 to 18 mesh size, and rice hull have comparable oil sorption capacities, which are lower than those of the two former sorbents. It was found that oil viscosity plays an important role in oil sorption by sorbents. All adsorbents used in this work could remove the oil from the surface of the water preferentially.     

注高温热水管线缓蚀,阻垢实验研究

针对辽河油田高凝油区块注高温热水(85—95℃)引起的腐蚀、结垢,开展了室内和现场缓蚀、阻垢试验;分析了不同温度下注水的腐蚀情况,对比、考察了不同的缓蚀剂、阻垢剂及其复配物,得出了如下认识:在注高温热水条件下直接采用常温下使用的防腐蚀、防垢方法是不可行的,必须有针对性地进行高温条件下防腐蚀、防垢的实验研究工作。     

The significance of chemical markers in the bioprocessing of fossil fuels

Biochemical conversion of crude oils is a multi-step process proceeding through a series of biochemical reactions. These reactions can be characterized by a set of chemical markers which are associated with the chemical composition of crude oils. Reactions with heavy crude oils indicate that there is an overall decrease in the concentration and chemical speciation of organic sulfur compounds, and a redistribution of hydrocarbons and organometallic species. The contents of trace metals in the crude oils, such as nickel and vanadium, also decrease. Further, heavy ends of crudes, containing the asphaltenes and the polar nitrogen, sulfur, and oxygen containing fractions, as well as the organometallic compounds and complexes, are biochemically converted to lower molecular weight chemical species. In the studies reported in this paper, microorganisms used to mediate such reactions were thermophilic ( > 60°C) and pressure tolerant (up to 2500 psi). These organisms are also capable of biochemical conversion of bituminous and lignite coals in an analogous manner to their action on crude oils and follow similar trends characterized by chemical markers. For example, X-ray absorption near-edge structural (XANES) analyses of biotreated crude oils and low grade coals show that biochemical reactions lead to decreases in organic sulfides and thiophenes with a concurrent increase in sulfoxide contents. Chemically related constituents present in heavy crude oil fractions and low grade coals are the asphaltenes. Asphaltenes are complex structures containing heteroatoms and metals involved in inter- and intra-molecular bridges and stereochemical configurations. The chemical markers associated with the biochemical conversion of oils and coals indicate multiple biochemical processes involving chemical reactions at sites containing heteroatoms and metals leading to a breakdown of the structure(s) to smaller molecular weight units. Thus, using chemical markers as diagnostic tools, the extent and the efficiency of fossil fuel bioconversion may be predicted and monitored, allowing for better cost-efficient field trials. Recent results in this area will be presented and discussed in this paper.     

跨世纪的测井找油找气高技术

人类社会即将跨入21世纪,各行各业都在预测未来技术的发展,测井行业也不例外。预测成象测井技术将是跨世纪的测井找油找气高技术。     

国外几种脱硫醇工艺技术

硫醇是一种易挥发、有毒、腐蚀活性强的物质，在环保要求越来越严格的今天，必须将原油和凝析气中的硫醇加以脱除，才能达到环保要求。文章介绍了目前世界上采用的几种脱硫醇工艺。     

克拉2气田储层岩石的应力敏感性及其对生产动态的影响

克拉2气田是一个异常高压气藏，压力系数在2．0以上。在衰竭式开采条件下，其地层压力降幅可为普通气藏地层压力降幅的3倍以上，因此研究储层岩石应力敏感性及其对生产动态的影响意义重大。研究得出，岩石的应力敏感性特征主要有：岩石物性对应力的敏感性总体上不大，其中以孔隙度最小，渗透率次之，压缩系数最大；岩石物性随地层压力的下降而下降；在同一地层压降下．岩石物性下降幅度不是渗透率的连续函数，而是与渗透率分布范围有关，高渗透率范围，岩石物性下降幅度小，低渗透率范围，岩石物性下降幅度大。研究得出，克拉2气田岩石的应力敏感性对其生产动态的影响较小。     

石油价格机制改革之对策

文章在阐述我国石油价格形成机制的演变过程的基础上,针对我国目前石油定价机制所导致的诸如石油价格变动滞后以及由此带来的市场信号失灵等问题思考了相应的改革对策,提出了调整政府价格管理职能、建立平等竞争的市场规则、完善稳定油价的调控体系以及加快建立石油战略储备等7个方面的建议。     

现场总线技术的特点及其在热电站的应用

阐述了现场总线技术的含义、主要特点和优点,对比了现场总线控制系统与DCS系统的区别,介绍了现场总线技术在洛阳石化分公司热电站的典型应用及其发展前景。     

离心压缩机可倾轴瓦油封漏油问题的解决

本文全面分析了DH80—16型离心压缩机可倾轴瓦油封漏油的原因,并介绍了可倾轴瓦油封漏油问题的解决及具体实施方案。     

大庆油田葡深1井射孔及测试

葡深1井完钻井深5500m，井温高达200℃以上，射孔、测试施工难度大。经过针对性的射孔测试设计和模拟试验，成功地完成了二层射孔及测试，射孔弹发射率100％，获取了合格的地层测试资料，为该地区下步深层勘探布署提供了科学依据。