Controlled oxygen incorporation in indium gallium arsenide and indium phosphide grown by metalorganic vapor phase epitaxy

The defect engineering in metalorganic vapor phase epitaxy In_xGa_1-xAs and InP by controlled oxygen doping using diethyl aluminum ethoxide (DEALO) was developed in this study. DEALO doping has led to the incorporation of Al and O, and the compensation of shallow Si donors in In_xGa_1−xAs: Si with 0 ≤ x ≤ 0.25. With the same DEALO mole fraction during growth, the incorporation of Al and O was found to be independent of x, but the compensation of Si donors decreases with increasing In content. Deep level transient spectroscopy analysis on a series of In_xGa_1-xAs: Si. samples with 0 ≤ x ≤ 0.18 revealed that oxygen incorporation led to a set of deep levels, similar to those found in DEALO doped GaAs. As the In composition was increased, one or more of these deep levels became resonant with the conduction band and led to a high electron concentration in oxygen doped In_0.53Ga_0.47As. Low temperature photoluminescence emission measurements at 12K on the same set of samples revealed the quenching of the near-band edge peak, and the appearance of new oxygen-induced emission features. DEALO doping in InP has also led to the incorporation of Al and O, and the compensation of Si donors due to oxygen-induced multiple deep levels.     

储层识别模式的研究

用数学方法建立气测井油气储层识别模式,以解决录井中实时软件在判别依据少的条件下,及时识别油气显示假异常的难题。该判别式经实用,正到率达90％。     

黄土塬区天然气地震技术和综合解释

黄土塬区复杂的地表条件难以获得可供解释的物探资料,本文给出了勘探天然气的地震技术,在野外弯线地震数据采集中,冲沟区运用了弯线高分辨率技术;塬上区采用非纵测线和地震测深观测系统,大药量、深井和强化组合法的接收条件。初步解决了弯线地震资料处理中二维滤波、静校正、速度分析等技术难题。摸索出一套以地震为骨架,构造解释与岩性解释相结合,重力-电法-地震联合解释落实古生界天然气构造圈闭的综合物探解释技术,并以实例展示方法的有效性。     

Formation of uniform GaAs multi-atomic steps with 20–30 nm periodicity and related structures on vicinal (111)B planes by MBE

We studied morphology of GaAs surfaces and the transport properties of two-dimensional electron gas (2DEG) on vicinal (111)B planes. Multi-atomic steps (MASs) are found on the vicinal (111)B facet grown by molecular beam epitaxy, which will affect electron transport on the facet. We also studied how the morphology of GaAs epilayers on vicinal (111)B substrates depends on growth conditions, especially on the As₄ flux. The uniformity of MASs on the substrates have been improved and smooth surfaces were obtained when the GaAs was grown with high As₄ flux, providing step periodicity of 20 nm. The channel resistance of the 2DEG perpendicular to the MASs is reduced drastically with this smooth morphology. These findings are valuable not only for fabricating quantum devices on the (111)B facets but also those on the vicinal (111)B substrates.     

凝析气井井筒动态预测方法

利用垂直管流公式,结合流体相平衡热力学闪蒸计算,运用状态方程模拟,给出凝析气井井筒动态预测新方法.根据该方法.结合油藏数值模拟计算的结果,可准确地预测不同生产时期凝析气井的井筒动态.     

荫罩黑化及DX气与煤气成分的探讨

本文介绍了彩色显像管荫罩黑化反应的机理,详细说明了DX气制气流程,以及DX气的成分对黑化膜品质的影响。计算分析了成分不同的煤气在制成DX气时的成分变化。同时还分析了黑化工艺和黑化设备对煤气成分波动的适应性,及在生产实践中改变DX气制气时的煤气空气对黑化膜质量的影响。     

Gas diffusion and dielectric studies of polystyrene‐fullerene compositions

Polystyrene‐fullerene compositions containing up to 0.45 mol % (3 wt %) fullerene C₆₀ were investigated. It was established that the addition of fullerene to polystyrene (PS) leads to an increase of molecular packing density and so influences the transport of small molecules through the polymer films. Gas diffusion through films of PS‐fullerene compositions is slower than through PS films, and gas separating properties of compositions are higher. Dielectric studies showed that the fullerene is distributed as clusters in the polymer matrix of solid composition prepared from a toluene solution of PS and fullerene. Heating without air to the temperature higher than PS glass transition leads to increasing relaxation time of α‐transition in PS of compositions containing >0.15 mol % (1 wt %) fullerene. This effect is caused by rather strong interaction of PS chains via fullerene molecules entered into the PS‐fullerene complex. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2946–2951, 2002     

Characterization of hollow fiber membranes in a permeator using binary gas mixtures

We have studied the CO₂/CH₄ mixed gas permeation through hollow fiber membranes in a permeator. An approach to characterize the true separation performance of hollow fiber membranes for binary gas mixtures was provided based on experiments and simulations. Experiments were carried out to measure the retentate and permeate flow rates and compositions at each outlet. The influences of pressure drop within the hollow fibers, non-ideal gas behavior in the mixture and concentration polarization were taken into consideration in the mathematics model. The calculation results indicate that the net influence of the non-ideal gas behavior, competitive sorption and plasticization yields the calculated CO₂ permeance in a mixed gas permeator close to that obtained in pure gas tests. Whereas the CH₄ permeance is higher in the mixed gas tests than that in the pure gas tests, as the plasticization caused by CO₂ dominates the permeation process. As a result, the CO₂/CH₄ mixed gas selectivity is smaller than those obtained in pure gas tests at equivalent pressures.The calculated membrane performance shows little changes with stage cut if the effect of concentration polarization is accounted for in the calculation. The integration method developed in this study could provide more accurate characterizations of mixed gas permeance of hollow membranes than other estimation methods, as our model considers the roles of non-ideal gas behavior and concentration polarization properly.     

东营深层盐膏层钻井液工艺

胜利油田东营深层盐膏地层发育,盐膏段厚度大,分布范围广,地层岩性十分复杂,钻井中经常发生喷、漏、塌、卡,遇阻、划眼、电测遇阻等井下复杂事故。郝科1井是在该区设计的一口重点深探井,宅钻井深5807.81m,井底最高温度230℃。介绍了深层盐膏层钻井液体系的转化工艺、性能控制、维护处理、防漏、堵漏、固相控制、抗污染和钻具缓蚀等技术,以及MMH聚合物饱和盐水钻井液在郝科1井的成功应用。结果表明,该钻井液在高密度下对盐膏层具有较强的抑制性、悬浮携砂性和抗污染性,抗温220—230℃。MMH聚合物饱和盐水钻井液体系及其配套技术满足了深层盐膏层钻井施工需要。     

Use of inverse gas chromatography to quantify interactions in amine cured epoxy resins

Flory–Huggins interaction parameters, λ, were determined for a series of probes in an amine cured epoxy resin matrix (433–493 K) and its precursors (324–363 K) by inverse gas chromatography (IGC). Hildebrand–Scatchard theory was combined with Flory–Huggins theory in order to estimate infinte dilution solubility parameters (δ₂) for the matrix and its precursors at 298 K. It was shown that the value of the solubility parameter for the cured resin matrix lies between those of its precursors. Compared to the majority of published work, an unusual aspect of this application of IGC is that solubility parameters have been determined when the stationery phases are (i) small molecules and (ii) a highly crosslinked polymer. Moreover, all possible attempts have been made to ensure equilibrium conditions between probe and stationary phase, and compensation for asymmetry of peak profile has been applied in determining δ₂. The solubility parameters estimated by IGC are in good agreement with those calculated by other methods.