陶瓷原料中二氧化硅分析方法的对比与选择

本文综合各种文献 ,对陶瓷原料中SiO2 的各种分析方法的优缺点 ,使用条件 ,应用侧重点进行了比较与评述     

化学铣切槽液中Na2S的分析

本文采用“碘量法”测定化铣液中的硫化钠，分析结果的准确度和精密度完全能够满足生产要求。     

Robust sparse principal component analysis

The model for improving the robustness of sparse principal component analysis（PCA） is proposed in this paper. Instead of the l2-norm variance utilized in the conventional sparse PCA model,the proposed model maximizes the l1-norm variance,which is less sensitive to noise and outlier. To ensure sparsity,lp-norm（0 p 1） constraint,which is more general and effective than l1-norm,is considered. A simple yet efficient algorithm is developed against the proposed model. The complexity of the algorithm approximately linearly increases with both of the size and the dimensionality of the given data,which is comparable to or better than the current sparse PCA methods. The proposed algorithm is also proved to converge to a reasonable local optimum of the model. The efficiency and robustness of the algorithm is verified by a series of experiments on both synthetic and digit number image data.     

Impedance spectroscopy study of hardened Portland cement paste

In this paper, the differential impedance analysis (DIA) has been applied to the study of the dielectric properties of hardened Portland cement paste. Two time constants are found in the impedance spectra obtained in the frequency region form 100 kHz to 15 MHz. One time constant has been attributed to the solid matrix and the other one to the liquid phase filling the pores. The effect of the cement paste-electrodes interface has been quantified using two different experimental set-ups. Measurements using direct contact between electrodes and cement paste have been compared with measurements using an air gap technique in which the specimen “floats” between the electrodes. The two referred time constants have been found in both types of measurements. The influence of drying on the dielectric parameters is also studied.     

Visitor-artwork network analysis using object detection with image-retrieval technique

Recent museum exhibitions are becoming a means by which to satisfy visitor demands. In order to provide visitor-centric exhibitions, artwork must be analyzed based on the behavior of visitors, and not merely according to museum professionals' points of view. This study aims to analyze the relationship between museum visitors and artwork via a network analysis based on visitor behavior using object detection techniques. Cameras installed in a museum recorded visitors, and an object detector with a content-based image-retrieval technique tracked visitors from the videos. The durations spent with different artworks were measured, and the data was converted into a bipartite graph. The relationships between different artwork types were analyzed with a visitor-centered artwork network. Based on the visitors’ behavior, significant artworks were identified and the artwork network was compared to the arrangement of the museum. The tendency of edges in the artwork network was also examined considering visitors' preferences for artworks. The method used here makes it possible to collect quantitative data, with the results possibly used as a basis and for reference when analyzing artwork in a visitor-centered approach.     

高速公路施工区车辆强制换道耗时生存模型

为研究高速公路施工区车辆强制换道行为及其影响因素,采用生存分析中的半参数分析方法建立强制换道耗时的乘法风险率模型.通过无人机拍摄采集高速公路施工区的车辆换道耗时及其影响因素数据,最终确立换道耗时Cox比例风险模型,对换道耗时数据进行Cox回归建模分析.结果表明:近77%的换道车辆在10 s内完成换道;小型车和中型车经养护施工区的换道耗时未发现显著性差别;对于相同的换道耗时,平峰期的累积生存率明显低于高峰期和过渡时期,而高峰期的累积生存率最高.建立的强制换道耗时生存模型可有效的定量分析车型和交通时段对高速公路施工区车辆换道行为的影响,可为高速公路施工区交通管理控制及车辆换道行为建模及仿真奠定一定的理论基础.     

普光气田邻井干扰压降研究

根据普光气田现场资料,分析普光气田关井压降恢复时间和稳定生产时间的关系。建立邻井干扰计算模型,评价邻井干扰压降值及邻井干扰,并对邻井干扰规律进行敏感性分析。     

基于MRIO与SNA的中国水资源空间转移网络分析

基于2002年、2007年和2012年的多区域投入产出表的相关数据,利用多区域投入产出(MRIO)模型和社会网络分析法(SNA)分析了中国水资源流动网络的空间关联性和结构特征。结果表明:网络中的链接数量没有随水足迹贸易值的增加而增加,链接路径上的流量不断增加,网络的韧性不够,空间关联渠道有待拓展,存在一定的等级差异,稳定性需要加强;网络中一些省份链接的增加,会削弱其他省份的链接数目,这种可塑性特征有利于在全国范围内合理配置水资源;将网络划分为4个板块,板块间的溢出关系主要是以板块内部为主,且少数板块之间没有任何的溢出关系。     

一种基于并联机构的航天器姿态模拟装置的设计开发

航天器发射升空前进行地面测试和试验是航天器研制过程中的重要环节。文中针对一种基于并联机构的姿态模拟装置的设计开发,从位置分析、速度分析和虚拟样机的建造和仿真分析等方面对3UPS-PU并联机构进行研究,完成姿态模拟装置的设计,为航天器装配、试验和测试设备的设计提供一种新的思路。     

基于改进Kendall-f算法的发电机定子温度分析

在线监测发电机定子温度可有效发现定子部分过热性故障,如何从检测的温度数据中提取反映定子故障预警的信息是目前国内外研究的热点。该文采用可变窗改进Kendall-f算法处理监测温度数据,提取其变化趋势特征信息;采用偏度分析提取监测温度异常值,从而正确诊断定子过热性故障,仿真分析及实验结果表明该方法有效提高了定子温度监测与预警的准确率。