Adherence kinetics, resistance to benzalkonium chloride and microscopic analysis of mixed biofilms formed by Listeria monocytogenes and Pseudomonas putida

Comparison between the resistance to BAC and the microscopic structure between mixed-species biofilms formed by different strains of Listeria monocytogenes and Pseudomonas putida CECT 845 under different scenarios and that obtained by the corresponding monospecies L. monocytogenes biofilm was carried out. The association of P. putida with L. monocytogenes quickens biofilm formation and increases significantly (p < 0.05) the BAC-resistance of the biofilm after 4 days of incubation at 25 °C respecting to that formed by monospecies biofilms. According with the adherence profiles of P. putida, two different patterns of association between both species (A and B) were identified, being type A pattern found in the mixed biofilms much more resistant to BAC. After 11 days of incubation, a destructuration of mixed biofilms occurred in all experimental assays, being in 2 out of 5 experimental cases (4032 and BAC-adapted 5873 on polypropylene) accompanied by a sharp decrease in the number of adhered cells. Microscopic analyses demonstrated that complex three-dimensional microscopic structure showed the highest resistance to BAC (4032-SS). Obtained results clearly highlight that to improve disinfection protocols for assuring food safety, it is necessary to mimick those bacterial association that occur in nature.     

Effects of gas atmosphere, antimicrobial dip and temperature on the fate of Listeria innocua and Listeria monocytogenes on minimally processed lettuce

The growth and survival of inoculated strains of Listeria innocua and L. monocytogenes on minimally processed lettuce were studied. The effects of package atmospheres (lettuce sealed within packages after flushing with 100% N₂ or without flushing with N₂, lettuce sealed within perforated packages), antimicrobial dips (100 p.p.m. chlorine solution for 5 min, 1% citric acid solution for 5 min) and storage temperatures (3°C and 8°C) were investigated. Populations of L. innocua and L. monocytogenes on undipped lettuce stored at 3°C gradually decreased (by 1–1.5 log cycles) during a 14 day storage period. By contrast counts on lettuce stored at 8°C did not change significantly ( P > 0.05). Flushing packages of lettuce with 100% N₂ followed by storage at 8°C resulted in a significant increase ( P < 0.05, by 2–3 log cycles) in L. innocua and L. monocytogenes counts during storage. L. innocua , strain NCTC 11288, behaviour was similar to that of L. monocytogenes (strains ATCC, 19114 and NCTC 11994) under these storage temperatures and atmospheres. Using L. innocua as a model for L. monocytogenes , it was found that dipping lettuce in a chlorine or citric acid solution followed by storage at 8°C resulted in a significant increase ( P < 0.05, by 2 log cycles) in L. innocua populations compared with undipped samples. It is concluded that N₂ flushing or use of antimicrobial dips combined with storage at 8°C, both enhanced the survival and growth of Listeria populations on shredded lettuce.     

BCLA CLEAR - Contact lens wettability,cleaning, disinfection and interactions with tears

Contact lens materials have undergone significant changes over the past 20 years, particularly with respect to the introduction of silicone hydrogel materials. Whilst this development addressed hypoxic issues, other important areas relating to contact lens success, notably comfort, require further research.Contact lens wettability remains a crucially important part of biocompatibility. Contact lenses can be made more wettable by incorporation of surfactants into blister packs, internal wetting agents, surface treatments or care solutions. However, there remains no clear association between contact lens wettability and comfort, making it challenging to determine the potential for these approaches to be of significant clinical benefit. Most contact lenses are used on a daily wear, reusable basis, which requires them to be disinfected when not worn. The ideal disinfecting solution would also improve comfort during wear. However, balancing these requirements with other factors, including biocompatibility, remains a challenge. Soft lens materials invariably take up and subsequently release certain components of disinfecting solutions onto the ocular surface. This may affect tear film stability and the normal ocular microbiome, and further research is needed in this area to determine whether this has any affect on comfort. Finally, contact lens materials sorb components of the tear film, and these interactions are complex and may change the biochemistry of the tear film, which in turn may affect their comfort.In conclusion, the interaction between lens materials, tear film and disinfection solution plays an important role in the biocompatibility of lenses. However, the exact role and whether this can be altered to improve biocompatibility and comfort during wear remains debatable. This report summarises the best available evidence to examine this complex relationship and the opportunities for practitioners to enhance in-eye comfort of contemporary lenses, along with providing suggestions for areas of study that may provide further information on this topic.     

Bromate formation in bromide-containing waters irradiated by gamma rays

The formation of bromate,a classified potential carcinogen,is of great concern when disinfection processes are used for treating high-bromide drinking waters.Bromide-containing aqueous solutions with various additives were irradiated by ~(60)Co γ source.With a 2.0 kGy irradiation of N_2O-saturated solutions at initial bromide concentrations of 180.2μgl~(-1),416.9μgl~(-1),663.1μgl~(-1) and 823.9μgl~(-1).79.5%,84.0%,87.3%and 88.3%of bromide ions were transformed to bromate,respectively.Addomg CO_3~(2-)/HCO_3~- or NO_3~- ions into N_2Osaturated bromide solutions,the amount of bromate ions formed decreased with increasing concentrations of the additives.On the other hand,the bromate concentration was all below the detection limit of 1 μgl~(-1) whenever N_2O was not added to quench e_(aq)~- and H.The results indicated that γ-rays irradiation could be used as a disinfection process,instead of ozonation,to comply with upcoming more stringent regulations,especially in waters containing high concentrations of bromide.     

Influence of chemical disinfection on mechanical and structural properties of type III and IV dental stones

Abstract

Abstract

We report on the effect of chemical disinfection in aqueous 1% virkon, 0·525% hypochlorite and slurry solutions on the mechanical and structural properties of type III and IV dental stones. For both dental stones, compressive strength and diametral tensile strength decrease with the application of all types of disinfectants. Virkon disinfectant decreases the mechanical strength with the lowest magnitude. The X-ray diffraction patterns of samples show the existence of dihydrate and hemihydrates microcrystals along with traces of CaSO₄.xH₂O (x?=?0·02–0·48) in as prepared samples, but do reveal that hemihydrate phase is removed after spraying disinfectants. Fractography of the dental stones clearly indicates that the separation between the microcrystals is widened by the disinfection process as a consequence of the possible dissolution of last precipitated gypsum phases. The mechanical properties of the dental stones are effectively decreased after disinfection to different levels.     

Research Note Interferences due to Ozone-Scavenging Reagents in the GC-ECD Determination of Aldehydes and Ketones as the (2, 3, 4, 5, 6, -Pentafluorobenzyl) oximes

In order to study ozonation byproduct (OBP) formation as a function of time, it is necessary to quench ozone and thereby fix the concentrations of the byproducts. Reagents chosen for this purpose must not react with the OBPs or otherwise adversely impact the analysis. Six potential ozone-scavenging reagents were tested for possible interference in the GC-ECD determination of aldehydes and ketones after derivatization with O-(2,3,4,5,6-pentafluorobenzyl)oxylamine (PFBOA). All six—sodium nitrite, sodium cyanide, sodium methanoate (formate), indigo-5,5′-disulfonate disodium (Indigo Carmine), indigo-5,5′,7-trisulfonate tripotassium, and tin(II) chloride—were found to interfere in the analysis.     

The fate of wastewater-derived NDMA precursors in the aquatic environment

To assess the stability of precursors of the chloramine disinfection byproduct N-nitrosodimethylamine (NDMA) under conditions expected in effluent-dominated surface waters, effluent samples from four municipal wastewater treatment plants were subjected to chlorination and chloramination followed by incubation in the presence of inocula derived from activated sludge. Samples subjected to free chlorine disinfection showed lower initial concentrations of NDMA precursors than those that were not chlorinated or were disinfected with pre-formed chloramines. For chloraminated and control (unchlorinated) treatments, the concentration of NDMA precursors decreased by an average of 24% over the 30-day incubation in samples from three of the four facilities. At the fourth facility, where samples were collected on three different days, NDMA precursor concentrations decreased by approximately 80% in one sample and decreased by less than 20% in the other two samples. In contrast to the low reactivity of the NDMA precursors, NDMA disappeared within 30 days under the conditions employed in these experiments. These results and measurements made in an effluent-dominated river suggest that although NDMA may be removed after wastewater effluent is discharged, wastewater-derived NDMA precursors could persist long enough to form significant concentrations of NDMA in drinking water treatment plants that use water originating from sources that are subjected to wastewater effluent discharges.     

Removal of low-molecular weight DBPs and inorganic ions for characterization of high-molecular weight DBPs in drinking water

High-molecular weight (MW) halogenated disinfection byproducts (DBPs) may cause adverse health effects. In this work several issues related to the better separation and characterization of the high MW halogenated DBPs (MW>500Da) were studied. Ultra-filtration (UF) coupled with a nominal 500-Da membrane was employed to flush out low MW DBPs and inorganic ions. Two procedures, intermittent UF and continuous UF, were used and compared. The results demonstrate that haloacetic acids, chloride and sodium ions could be effectively flushed out, and most of phosphate ions could be flushed out for a given dilution number or sufficient Milli-Q water. The size exclusion chromatograms indicate that haloacetic acids and trihalomethanes were not bound to Suwannee River fulvic acid (SRFA); 2,4,6-trichlorophenol might form some binding with SRFA, but it appeared to be very weak and readily broken up when passing along the size exclusion column. The octanol-water partition coefficients of low MW DBPs and the properties of humic substances seem to play key roles in determining the formation of possible bindings between low MW DBPs and humic substances.     

Effects of indoor drinking water handling on trihalomethanes and haloacetic acids

In this study, different tap water handling strategies were investigated to evaluate the effects on two principal chlorinated DBPs, trihalomethanes (THMs) and haloacetic acids (HAAs). Tap water samples collected in the Quebec City (Canada) distribution system on a spatio-temporal basis were subjected to diverse indoor handling scenarios: storing water in the refrigerator, boiling water followed by storage and, finally, filtering water with a point-of-use commercial pitcher also followed by storage. In the first two cases, the use of covered and uncovered pitchers was investigated separately, while in the last case, both the use of new and used filters was compared. In all cases, maximum storage time was 48h. Results demonstrated that in some cases, water handling scenarios have considerable effect, and in other cases, little or no effect. Removal of THM concentrations by simple storage was high (on average 30%) and very high by boiling and filtering with subsequent storage in the refrigerator (on average, 87% and 92%, respectively). In scenarios where water was stored in uncovered pitchers (with or without previous boiling and filtering), the THM decrease was higher for increased storage times. However, storage did not have any effect on HAAs, whereas boiling decreased levels of trichloroacetic acid (TCAA) (on average 42%) and increased levels of dichloroacetic acid (DCAA) (on average 35%), resulting in unchanged average levels of total HAAs. The use of the filtration pitcher decreased HAA levels dramatically (on average 66%). Percentages of change in chlorinated DBPs in the different scenarios varied according to initial concentrations in tap water (baseline water), that is, according to the spatio-temporal variations of these substances in the distribution system. On the basis of these results, the paper discusses implications regarding public health protection and exposure assessment for epidemiological studies.     

Implications of sequential use of UV and ozone for drinking water quality

The formation of bromate levels exceeding the drinking water standard of 10 microg L-1 may impose the reduction of ozone doses used in the treatment of drinking water. This paper illustrates the procedure of evaluating the use of reduced ozone doses while implementing an additional UV disinfection step for an actual drinking water treatment plant. Ozonation was performed at low ozone doses in bench-scale experiments with a pretreated river water from the Paris area (France). At the low ozone dose of 0.5 mg L-1, bromate formation could be kept below 0.4 microg L-1, while inactivation of vegetative bacteria and UV-resistant viruses was calculated to exceed 5 log units, and a substantial decoloration (31% of the absorption at lambda=254 nm) was achieved. Based on the measured transient ozone and OH radical concentrations, the oxidation of micropollutants was calculated. Fast reacting micropollutants containing phenol, amine or double bond moieties, such as sulfamethoxazole, diclofenac and 17-alpha-ethinylestradiol, were completely oxidized. Slow-reacting synthetic micropollutants, e.g., atrazine, iopromide and methyl tertiary butyl ether (MTBE), were oxidized by only 20%, 20% and 10%, respectively, and the taste and odor compounds 2-methylisoborneol (MIB) and geosmin by 40% and 50%, respectively. The addition of an UV treatment step to the existing treatment train, which should guarantee disinfection of ozone-resistant pathogenic microorganisms, including Cryptosporidium parvum oocysts, has negligible effects on water matrix components but may induce significant transformation of micropollutants. Overall, the combination of ozonation at reduced doses and UV treatment leads to an improved water quality with regard to disinfection, oxidation of micropollutants and minimization of bromate.