Bench-scale testing of a magnetic ion exchange resin for removal of disinfection by-product precursors

The objective of this research was to compare enhanced coagulation with anion exchange for removal of disinfection by-product (DBP) precursors (i.e. natural organic matter (NOM) and bromide). Treatment with a magnetic ion exchange resin (MIEX((R))) was the primary focus of this study. Raw waters from four utilities in California were evaluated. The waters had low turbidity, low to moderate organic carbon concentrations, a wide range of alkalinities, and moderate to high bromide ion concentrations. The treated waters were compared based on removal of ultraviolet (UV) absorbance, dissolved organic carbon (DOC), trihalomethane formation potential (THMFP), and haloacetic acid formation potential (HAAFP). The results indicated that treatment with MIEX is more effective than coagulation at removing UV-absorbing substances and DOC. Treatment with MIEX and treatment with MIEX followed by coagulation yielded similar results, suggesting that coagulation of MIEX-treated water does not provide additional removal of organic carbon. MIEX treatment reduced the THMFP and HAAFP in all waters, and did so to a greater extent than coagulation. Treatment with MIEX was most effective in raw waters having a high specific UV absorbance and a low anionic strength. Following MIEX treatment, subsequent chlorination resulted in a shift to the more brominated THM and HAA species as compared to chlorination of the raw water. MIEX also removed bromide to varying degrees, depending on the raw water alkalinity and initial bromide ion concentration.     

Disinfectant efficacy of chlorite and chlorine dioxide in drinking water biofilms

The drinking water industry is closely examining options to maintain disinfection in distribution systems. In particular this research compared the relative efficiency of the chlorite ion (ClO2-) to chlorine dioxide (ClO2) for biofilm control. Chlorite levels were selected for monitoring since they are typically observed in the distribution system as a by-product whenever chlorine dioxide is applied for primary or secondary disinfection. Previous research has reported the chlorite ion to be effective in mitigating nitrification in distribution systems. Annular reactors (ARs) containing polycarbonate and cast iron coupons were used to simulate water quality conditions in a distribution system. Following a 4 week acclimation period, individual ARs operated in parallel were dosed with high (0.25mg/l) and low (0.1mg/l) chlorite concentrations and with high (0.5 mg/l) and low (0.25mg/l) chlorine dioxide concentrations, as measured in the effluent of the AR. Another set of ARs that contained cast iron and polycarbonate coupons served as controls and did not receive any disinfection. The data presented herein show that the presence of chlorite at low concentration levels was not effective at reducing heterotrophic bacteria. Log reductions of attached heterotrophic bacteria for low and high chlorite ranged between 0.20 and 0.34. Chlorine dioxide had greater log reductions for attached heterotrophic bacteria ranging from 0.52 to 1.36 at the higher dose. The greatest log reduction in suspended heterotrophic bacteria was for high dose of ClO2 on either cast iron or polycarbonate coupons (1.77 and 1.55). These data indicate that it would be necessary to maintain a chlorine dioxide residual concentration in distribution systems for control of microbiological regrowth.     

Ultra-Violet Disinfection of Sewage Effluents: A Pilot Study at Bellozanne, Jersey

In March 1990 a pilot ultra-violet disinfection plant was installed at the sewage-treatment works in Bellozanne, Jersey. The pilot plant was set up to test the ability of the process to meet certain defined objectives and, ultimately, to enable the island authorities to satisfy stringent water quality objectives in the receiving waters of St Aubins Bay.
The pilot study simulated an open channel installation using medium pressure ultra-violet lamps parallel to the direction of flow. The pilot plant was supplied by Trojan Technologies Inc.
The pilot study met its objectives and confirmed the design parameters for a full-scale plant installation to follow.     

Genotoxicity of the disinfection by-products resulting from peracetic acid- or hypochlorite-disinfected sewage wastewater

Wastewater disinfection is routinely carried out to prevent the spread of human pathogens present in wastewater effluents. To this aim, chemical and physical treatments are applied to the effluents before their emission in water bodies. In this study, the influence of two widely used disinfectants, peracetic acid (PAA) and sodium hypochlorite (NaClO), on the formation of mutagenic by-products was investigated. Wastewater samples were collected before and after disinfection, in winter and in summer, at a pilot plant installed in a municipal wastewater-treatment plant. Samples were adsorbed using silica C18 cartridges and the concentrates were tested for mutagenicity in the Salmonella typhimurium reversion test with strains TA98 and TA100. Non-concentrated water samples were tested with two plant genotoxicity assays (the Allium cepa root anaphase aberration test and the Tradescantia/micronucleus test). Mutagenicity assays in bacteria and in Tradescantia showed borderline mutagenicity in some of the wastewater samples, independent of the disinfection procedure applied. Negative results were obtained in the A. cepa anaphase aberration test. These results indicate that, in the conditions applied, wastewater disinfection with PAA and NaClO does not lead to the formation of significant amounts of genotoxic by-products.     

A new approach to evaluating the toxicity and genotoxicity of disinfected drinking water

The aim of this study was to evaluate the formation of toxic and genotoxic compounds in surface drinking waters treated with two widely used disinfectants, sodium hypochlorite (NaClO) and chlorine dioxide (ClO(2)), and a new disinfectant, peracetic acid (PAA). For this purpose a pilot plant was set up to add these biocides continuously to pre-filtered lake water flowing into three different basins. During three seasonal experiments, short-term in vivo tests (with plant, fish and molluscs) and in vitro tests (with bacteria, yeast and human cells) were carried out to evaluate the formation of genotoxic disinfection by-products (DBPs). Gas chromatography/mass spectrometry (GC/MS) was used to identify DBPs produced during the different treatments, microbiological analyses were performed to test the biocidal activity of the disinfectants, and chemical analyses were carried out to evaluate the quality of the water. The pilot drinking water plant under study was useful in studying the toxicity and genotoxicity of disinfected drinking water with this combined chemical/biotoxicological approach. This paper describes the setting up of the pilot plant and sets out/reports the results of the microbiological and chemical analyses.     

Evaluation of Characterization Techniques for Iron Pipe Corrosion Products and Iron Oxide Thin Films

A common problem faced by drinking water studies is that of properly characterizing the corrosion products (CP) in iron pipes or synthetic Fe (hydr)oxides used to simulate the iron pipe used in municipal drinking-water systems. The present work compares the relative applicability of a suite of imaging and analytical techniques for the characterization of CPs and synthetic Fe oxide thin films and provide an overview of the type of data that each instrument can provide as well as their limitations to help researchers and consultants choose the best technique for a given task. Crushed CP from a water distribution system and synthetic Fe oxide thin films formed on glass surfaces were chosen as test samples for this evaluation. The CP and synthetic Fe oxide thin films were analyzed by atomic force microscopy (AFM), scanning electron microscopy (SEM), energy-dispersive spectroscopy, time-of-flight secondary ion mass spectrometry (ToF-SIMS), X-ray powder diffractometry (XRD), grazing incident diffractometry (GID), transmission electron microscopy (TEM), selected area electron diffraction, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared, M?ssbauer spectroscopy, Brunauer–Emmett–Teller N2 adsorption and Fe concentration was determined by the ferrozine method. XRD and GID were found to be the most suitable techniques for identification of the mineralogical composition of CP and synthetic Fe oxide thin films, respectively. AFM and a combined ToF-SIMS–AFM approach proved excellent for roughness and depth profiling analysis of synthetic Fe oxide thin films, respectively. Corrosion products were difficult to study by AFM due to their surface roughness, while synthetic Fe oxide thin films resisted most spectroscopic methods due to their limited thickness (118?nm). XPS analysis is not recommended for mixtures of Fe (hydr)oxides due to their spectral similarities. SEM and TEM provided great detail on mineralogical morphology.     

Inactivation of E. coli, B. subtilis spores, and MS2, T4, and T7 phage using UV/H2O2 advanced oxidation

The goal of this study was to evaluate the potential of an advanced oxidation process (AOP) for microbiocidal and virucidal inactivation. The viruses chosen for this study were bacteriophage MS2, T4, and T7. In addition, Bacillus subtilis spores and Escherichia coli were studied. By using H(2)O(2) in the presence of filtered ultraviolet (UV) irradiation (UV/H(2)O(2)) to generate wavelengths above 295nm, the direct UV photolysis disinfection mechanism was minimized, while disinfection by H(2)O(2) was also negligible. Virus T4 and E. coli in phosphate buffered saline (PBS) were sensitive to >295nm filtered UV irradiation (without H(2)O(2)), while MS2 was very resistant. Addition of H(2)O(2) at 25mg/l in the presence of filtered UV irradiation over a 15min reaction time did not result in any additional disinfection of virus T4, while an additional one log inactivation for T7 and 2.5 logs for MS2 were obtained. With E. coli, only a slight additional effect was observed when H(2)O(2) was added. B. subtilis spores did not show any inactivation at any of the conditions used in this study. The OH radical exposure (CT value) was calculated to present the relationship between the hydroxyl radical dose and microbial inactivation.     

Ozone Treatment of Sewage Works' Final Effluent

This paper describes a laboratory-based study which was designed to investigate (a) the changes in selected physico-chemical properties of a sewage-works' final effluent after ozonation, and (b) the effect of ozone on the concentration of organic halides and effluent toxicity and mutagenicity. Different conditions were studied involving the application of ozone concentrations up to 13.5% w/w and the ozonation of the effluent under both constant and variable ozonation rates.     

基于ROS的消毒机器人控制系统设计与实现

针对公共卫生领域消毒机器人存在开发成本高、维护性差等问题,提出一种基于机器人操作系统(ROS)的消毒机器人控制系统方案。该方案基于分层控制的理念将消毒机器人的控制系统分为用户层、决策层以及执行层,各层次功能明确,耦合性低、复用性好、灵活性高。用户层主要用来接收用户的应用指令,起到人机交互的作用;决策层主要承担机器人语音识别、定位与导航、路径规划等核心预算;执行层主要执行决策层发送过来的控制指令,控制机器人运动以及消毒工作。试验结果表明,该控制系统具有可靠性高、灵活性好、低成本等优点。