Asymptotic stress intensity factor density profiles for smeared-tip method for cohesive fracture

The paper presents a computational approach and numerical data which facilitate the use of the smeared-tip method for cohesive fracture in large enough structures. In the recently developed K-version of the smeared tip method, the large-size asymptotic profile of the stress intensity factor density along a cohesive crack is considered as a material characteristic, which is uniquely related to the softening stress-displacement law of the cohesive crack. After reviewing the K-version, an accurate and efficient numerical algorithm for the computation of this asymptotic profile is presented. The algorithm is based on solving a singular Abel's integral equation. The profiles corresponding to various typical softening stress-displacement laws of the cohesive crack model are computed, tabulated and plotted. The profiles for a certain range of other typical softening laws can be approximately obtained by interpolation from the tables. Knowing the profile, one can obtain with the smeared-tip method an analytical expression for the large-size solution to fracture problems, including the first two asymptotic terms of the size effect law. Consequently, numerical solutions of the integral equations of the cohesive crack model as well as finite element simulations of the cohesive crack are made superfluous. However, when the fracture process zone is attached to a notch or to the body surface and the cohesive zone ends with a stress jump, the solution is expected to be accurate only for large-enough structures.     

INTERFACE/INTERPHASE ENGINEERING OF POLYMERS FOR ADHESION ENHANCEMENT: PART II. THEORETICAL AND TECHNOLOGICAL ASPECTS OF SURFACE-ENGINEERED INTERPHASE-INTERFACE SYSTEMS FOR ADHESION ENHANCEMENT

Part I of this paper reviewed the theoretical principles of the macromolecular design of polymer interface/interphase systems for obtaining maximum adhesion and fracture performance of adhesively bonded assemblies. In Part II a novel, relatively simple and industry-feasible technology for surface-grafting connector molecules is demonstrated and discussed in detail and supported by a range of experimental examples. It is shown, in agreement with contemporary theory, that the use of chemically attached graft chemicals of controlled spatial geometry and chemical functionality enables a significant increase in the strength and fracture energy of the interphase, to the point of cohesive fracture of the substrate, or that of an adjacent medium such as adhesive, elastomer, or other material. This occurs even after prolonged exposure of investigated systems to adverse environments such as hot water.     

仿真含裂隙地层地震记录的研究

本文介绍了含裂隙地层二维介质的三分量波动方程和吸收边界条件，叙述了不同裂隙性质地层的仿真单炮记录和横波叠加时间剖面的正演方法，给出了模型及实际的横波叠加剖面仿真实例。     

The fracture stress of chemical vapour deposited diamond

The factors which control the fracture stress of chemical vapour deposited diamond have been studied using the 3-point bend geometry. Fracture stress values of 300–800 MPa for the growth side and 600–1200 MPa for the nucleation side were recorded for samples of thickness 0.4–2.4 mm. A Weibull modulus of 23 was calculated for the growth surface data, showing that the fracture stress variability was low for a brittle material. A theory based on these results demonstrates that the material behaviour is remarkably simple, depending only on the grain size and the sample thickness, regardless of wide variations in other parameters such as optical transmission and stress state. The paper also contains a possible explanation for this well-defined behaviour based on microstress variations resulting from differences in defect density in different growth sectors within a grain.     

The influence of nanoadhesives on the tensile properties and Mode-I fracture toughness of bonded joints

Nanoadhesives of epoxy resin are synthesized and evaluated. They are organically modified by multiwalled carbon nanotubes (MWCNT) (1% by weight) as reinforcement. Tensile tests are conducted on multiple identical unnotched and notched specimens to evaluate the overloading and fracture behavior of the nanoadhesives and are compared with the neat epoxy resin. In comparison with the neat epoxy, it is found that the 1% MWCNT reinforcement increased the ultimate and residual strength by about 29% and 56%, respectively. In comparison with the neat resin, there is a 265% increase in the fracture toughness of the MWCNT adhesive. Fracture surface analysis revealed the various mechanisms by which the MWCNT adhesives acquire their superior strength and toughness in comparison with the neat resin.     

������׾�ˮ��ѹ������ѹ��������Ԫ����

水力压裂几乎都是在套管井中进行的，射孔参数必然要影响到压裂施工参数设计，甚至影响到压裂效果。章将套管和岩石视为具有不同性能的两种材料，应用引进的CAD／CAE／CAM Pro/E有限元软件在SGI工作站上计算得到了射孔孔眼周围的应力分布，根据主应力方位可以确定压裂裂缝方位，结合岩石破裂准则可以得到水力压裂施工破裂压力。为优化射孔参数和设计压裂施工压力提供了分析方法。     

立井提升井底罐笼弹性承接装置的现场试验

介绍了井底罐笼弹性承接装置的基本原理,给山了现场试验方法及步骤,利用冲击减速度测试仪测出了罐笼冲击减速度曲线,为今后研究罐笼承接冲击动力学行为提供了试验基础。     

Crack redirection with thermal secondary loading

In the current paper crack redirection due to a strategic placing of a heat source in the vicinity of a crack tip is studied. Analysis suggests that for PMMA and considered temperature range the only factor responsible for the deviation of crack trajectory is thermal stress. The simulation of crack growth in PMMA under external tension and secondary heat loading shows that a moving heat source in the vicinity of a crack tip can serve as a pointer for the crack trajectory. In highly conductive materials, redirection can be possibly effected with low-power thermal dipoles.