TPC方法研究催化剂热分解动力学

设计了ＴＰＣ方法研究催化剂前驱体的热分解；对ＴＰＣ方法求取催化剂的热分解动力学方程进行了理论推导；采用ＴＰＣ方法试验求得了Ｎｉ－Ｚｎ／Ｃ催化剂的热分解动力学参数。试验表明，ＴＰＣ方法能直观、灵敏、方便地反映催化剂活性组份前驱体的本征热分解。     

裂解C_5馏分综合利用的对策

探讨了裂解C_5馏分就近集中分离综合利用和分散直接利用,以及建设单独分离双环戊二烯装置发展下游精细化工产品的综合利用策略。     

The determinants of heat-shock element-directed lacZ expression in Saccharomyces cerevisiae.

Heat-shock induction of heat-shock protein genes is due to a specific promoter element (the heat-shock element, HSE). This study used lacZ under HSE control (HSE-lacZ) to characterize HSE activity in Saccharomyces cerevisiae cells of different physiological states and differing genetic backgrounds. In batch fermentations HSE-lacZ induction by heat shock was maximal in exponential growth, and showed marked decline with the approach to stationary phase. Expression in the absence of heat shock was unaffected by growth phase, indicating that the growth-dependent expression of many yeast heat-shock genes uses promoter elements in addition to the HSE. Heat-induced expression was strongly influenced by the temperature at which cultures were grown. While basal, uninduced expression was constant during growth at different temperatures to 30 degrees C, induction by transfer to 39 degrees C was reduced by increases in growth temperature as low as 18-24 degrees C. Maximal HSE-lacZ induction (30- to 50-fold) was in cultures grown at low temperatures (18-24 degrees C), then heat shocked at 39 degrees C. Ethanol was a poor inducer. Mutations having little effect on HSE-lacZ expression included a respiratory petite; ubi4 (which inactivates the poly-ubiquitin gene); also ubc4 and ubc5 (which each inactivate one of the ubiquitin ligases involved in degradation of aberrant protein). pep4-3 increased both basal and induced beta-galactosidase about two-fold, probably because of slower turnover of this enzyme in pep4-3 strains.     

离子液体催化C_5馏分中二烯烃的聚合反应

合成了多种基于1-丁基-3-甲基咪唑阳离子的离子液体,并作为裂解C5馏分中混合二烯烃聚合反应的介质。考察了离子液体种类、反应温度、反应时间和添加Lew is酸对混合二烯烃聚合反应的影响。实验结果表明,以硝酸根为阴离子的离子液体对混合二烯烃的聚合反应具有一定的阻聚作用;以六氟磷酸根为阴离子的离子液体能明显促进混合二烯烃的聚合反应,提高二聚物的含量;添加Lew is酸(质量分数为1%的ZnCl2)的离子液体对混合二烯烃的聚合反应具有更明显的促进作用,其效果仅次于酸性氯铝酸类离子液体,反应温度以30℃以下为宜,温度过高将促使二聚物进一步聚合,形成三聚物乃至多聚物,降低二聚物的含量。     

SAPO-34/SiO_2催化甲醇制烯烃

采用水热法合成了SAPO-34分子筛,并用X射线粉末衍射仪和扫描电子显微镜对SAPO-34分子筛的结构进行了表征,同时探讨了黏合剂种类、甲醇分压、催化剂粒径和硅源等对SAPO-34分子筛催化甲醇制烯烃(MTO)反应性能的影响。实验结果表明,在MTO反应中,三烯(乙烯、丙烯和丁烯)选择性在反应初期存在明显的诱导期;以S iO2为黏合剂合成的SAPO-34/S iO2催化剂不但可缩短MTO反应的诱导期,三烯选择性也较未添加黏合剂或以A l2O3为黏合剂时高1~2个百分点;且当催化剂活性明显下降时,三烯选择性下降的幅度较小。催化剂粒径、甲醇分压及硅源对催化剂的诱导期也有明显的作用。在甲醇分压低于19kPa、催化剂粒径0.25~0.38mm、S iO2为黏合剂、硅酸四乙酯为硅源时,SAPO-34/S iO2催化剂的MTO性能明显提高。     

溶胶-凝胶法制备磷钨酸-硅胶催化合成苹果酯

采用溶胶-凝胶法制备了一系列磷钨酸-硅胶催化剂(PW/SG),考察了该催化剂催化乙酰乙酸乙酯与乙二醇液相缩合制备苹果酯的反应性能。实验结果表明,PW质量分数为40%时的PW/SG催化剂表现出最佳的催化活性;40%PW/SG催化剂制备苹果酯的最佳工艺条件为:n(乙酰乙酸乙酯)∶n(乙二醇)=1∶1.2,催化剂用量占反应物质量的0.36%,带水剂环己烷用量占反应物体积的30%,反应温度383K,反应时间90min;在此条件下,乙酰乙酸乙酯的转化率可达95.5%,苹果酯的选择性大于97%;催化剂稳定性实验表明,经5次重复使用,40%PW/SG催化剂的活性基本保持不变,乙酰乙酸乙酯转化率稳定在95.0%左右。     

RELAP5程序与三维时空中子动力学模型的耦合以及改进研究

引入堆芯物理计算的两群三维时空中子动力学模型,对RELAP5程序的点堆中子动力学模型进行了改进,同时设计了可视化界面,可方便地实现人.机交互操作.计算结果与实际应用表明,改进后的RELAP5程序计算功能和精度得到提高,使用更加方便,在核动力装置的仿真方面有很好的应用前景.     

Influence of washing and of heat-treatment conditions on the thermal stability of VPI-5

Thorough washing of a VPI-5 synthesized with n-dipropylamine as template improves greatly its thermal stability while no major change is observed in the template content. A detailed study of the influence of the pretreatment conditions shows that in order to obtain a high thermal stability (up to at least 960 °C) two parameters are of importance. The removal of both the template and the adsorbed water requires either a low heating rate at atmospheric pressure or a low pressure (less than 3 Torr) when the heating rate is 300 ° per hour.     

固载杂多酸催化剂气相催化合成乙酸丁酯的研究

在气固相反应体系中研究了酸处理膨润士固载的具有 Keggin结构的四种杂多酸在乙酸丁酯合成中的催化性能。实验结果表明 :同一载体负载不同杂多酸催化活性相似 ;不同载体负载的同一种杂多酸的催化活性与催化剂的表面酸性呈顺变关系。同时考察了反应温度 ,空速 ,酸 /醇比对催化活性的影响。在酸 /醇比为 1 ,温度为 1 2 0℃ ,空速为 3～ 5h- 1时 ,正丁醇和乙酸有较高的转化率 ,选择性接近 1 0 0 %。