油井缓蚀剂研究与应用

油井缓蚀剂研究与应用崔忠兴(中原油田设计院,濮阳457001)1.前言中原油田已进入高含水期,油井系统腐蚀严重,直接影响了油田的正常生产l’].为了解决油井系统腐蚀问题,在中科院腐蚀所的专种“基础f,联合开发研制了!MC—SDeZS油井缓蚀剂.该剂以合成炔氧甲基胺和炔氧甲基季法盐衍生物,以这两种衍生物为主体成分复配辅助成分而成的水溶油分散吸附成股型缓蚀剂l’1.通过室内高温高压模拟评价试验.ZI口油井加药试验及测试表明l‘],平?...     

无油迷宫式压缩机在含尘气体中的应用与改进

针对迷宫式压缩机在含尘气体中使用所出现的使用周期短等问题 ,在压缩机进口增设水洗塔、丝网除沫器 ,并对压缩机气阀、气缸盖等相关部件进行改进 ,取得了较好的效果     

Conversion of used vegetable oils to liquid fuels and chemicals over HZSM-5, sulfated zirconia and hybrid catalysts

Thailand’s food manufacturing uses about 47 Million liters per year of vegetable oil. Used vegetable oil is classified as waste, but has potential for conversion into liquid fuel. This research studied the catalytic conversion of used vegetable oil to liquid fuel, where investigation was performed in a batch microreactor over a temperature range of 380–430 °C, initial pressure of hydrogen gas over 10–20 bars, and reaction time of 45–90 minutes. Catalysts such as HZSM-5, Sulfated Zirconia and hybrid of HZSM-5 with Sulfated Zirconia were used to determine the conversion and yield of gasoline fraction. The major products obtained were liquid products, hydrocarbon gases and small amounts of solids. Liquid products were analyzed by simulated distillation gas chromatograph and the product distribution was obtained. Hybrid catalyst HZSM-5 with Sulfated Zirconia showed the highest yield of gasoline with a 26.57 wt% at a temperature of 430 °C, initial hydrogen pressure at 10 bars, and reaction time of 90 minutes in the ratio of hybrid HZSM-5 with Sulfated Zirconia at 0.3: 0.7.     

Frying Performance of No-<Emphasis Type="Italic">trans</Emphasis>, Low-Linolenic Acid Soybean Oils

Two extruded-expelled physically refined soybean oils with reduced contents of linolenic acid, ultra-low- linolenic acid (ULL, 1.5%) and low-linolenic acid (LL, 2.6%), and a extruded-expelled physically refined control oil (control, 5.3% linolenic acid) were evaluated by frying French fries in a commercial-like setting for 6 h day⁻¹ during 23 days. The oils became darker, increased in yellow color at the beginning, and became redder and less green throughout the process. Free fatty acids levels were not different among the oils until day 14, after which, ULL was different from the control for the remainder of frying. The conjugated dienoic acid values were greatest in the control. Generally, ULL and LL oils had lower percentages of polar compounds than did the control, providing a frying life 2 days longer than the control and ~30% increase in frying time. A trained sensory panel evaluated the French fries on days 2, 5, and 6. Buttery and potato flavors decreased, and rancid and painty flavors increased over frying time for all products. Rancid flavor was highest in the fries from the control oil. Overall, the ULL and LL oils performed better than did the control oil and ULL tended to perform better than the LL.     

试论小氮肥造气工序设备的更新换代

论述小型氮肥厂近年来在煤造气工序中主要设备的更新换代问题;介绍许多优良的新设备和新技术的应用情况。     

Development of refinery scheduling system using mixed integer programming and expert system

This paper presents a hybrid refinery scheduling system combining mathematical programming model and expert system. Mixed-integer linear programming models for crude oil movement between units are merged into the expert system that is for qualitative issues concerning crude vessel unloading operations. The target problem ranging from the crude unloading to the crude charging to distillation towers is decomposed into several module problems for efficiency. Compared with existing scheduling approaches for oil movement, the proposed hybrid refinery scheduling system is very effective in dealing with timing decisions involving vessel unloading operations due to the advantages of an expert system. Since the proposed scheduling system can generate solutions so fast, it is expected to play a key role in the real processes. This paper is dedicated to Professor Wha Young Lee on the occasion of his retirement from Seoul National University.     

新型复合聚结板式油水分离器

通过对聚结板式油水分离器传质过程机理的研究 ,开发出能够强化油水分离过程的新型高效复合聚结板。复合聚结板的两表面分别具有良好的亲水和亲油性能 ,从而使聚结板式油水分离器的分离效率提高 2 5 % ,处理能力增加 4 0 %。     

MTBE辛烷值测试法的探讨

MTBE作为调合生产高标号无铅汽油的重要的高辛烷值组分油，准确测试其辛烷值在汽油调和生产中具有重要的意义。初步探讨了MTBE研究法辛烷值的测试方法，尝试了用甲苯标准燃料做参比燃料直接测定其净辛烷值，同时也测定了MTBE的混配辛烷值，通过MTBE辛烷值的测试，了解了MTBE的调和效应，确认了在石油二厂无铅汽油调和生产中对催化汽油的MTBE的真实辛烷值约为108／RON，指导了车用无铅汽油的调和生产。     

利用电阻探针对石油设备及管道的腐蚀进行监测

从1998年起，国内石油炼制行业开始大量炼制进口高硫原油，油气管道的腐蚀问题受到了重视。介绍了电阻探针腐蚀监测系统的原理及组成。并针对油气管道，实施了在线监测，安装了6组腐蚀电阻探针，分析了测量结果，为今后防腐工作提供了依据。     

汽车刹车片用改性酚醛树脂的生产

在原有的酚醛树脂生产设备上，用腰果壳油和三聚氰胺对酚醛树脂进行改性，制得的改性树脂具有较好的软化点、聚合速度、挥发度和游离酚等性能；并且热分解温度较普通酚醛树脂大大提高。用它作胶粘剂生产的汽车刹车片，冲击强度增大：磨损率降低、摩擦性能提高、产品成本也大为降低。