淤浆鼓泡床中固体粒子的悬浮特性

研究了三相鼓泡床中的临界固含率,以空气作气相,水、乙醇-水、丙酮-水、萜松醇-二甲苯作液相,石英砂、煤、雷奈镍作为固相。分析了鼓泡柱的高径比、气体速度、固体粒子的大小和比重、液体的粘度对临界固含率的影响,提出了含有这些参数的无因次数群的关联式,讨论了本文提出的关联式和文献报导的差别。     

Low cost coal-based carbons for combined SO2 and NO removal from exhaust gas

The aim of this paper is to show how a cheap carbonaceous material such as low rank coal-based carbon (or char) can be used in the combined SO₂/NO removal from exhaust gas at the linear gas velocity used in commercial systems (0.12 m s⁻¹). Char is produced from carbonization and optionally activated with steam. This char is used in a first step to abate the SO₂ concentration at the following conditions: 100 °C, space velocity of 3600 h⁻¹, 6% O₂, 10% H₂O, 1000 ppmv SO₂, 1000 ppmv NO and N₂ as remainder. In a second step, when the SO₂ concentration in the flue gas is low, NO is reduced to N₂ and steam at the following experimental conditions: 150 °C, space velocity of 900 h⁻¹, 6% O₂, 10% H₂O, 0-500 ppmv SO₂, 1000 ppmv NO, 1000 ppmv NH₃ and N₂ as remainder.It has been shown that the presence of NO has no effect on SO₂ abatement during the first step of combined SO₂/NO removal system and that low SO₂ inlet concentration has a negligible effect on NO reduction in the second step. Moreover, this char can be thermally regenerated after use for various cycles without loss of activity. On the other hand, this regenerated char shows the highest NO removal activity (compared to parent chars, either carbonized or steam activated) which can be attributed to the activating effect of the sulfuric acid formed during the first step of the combined SO₂/NO removal system.     

PTA尾气吸附系统的优化

针对吸附系统内除湿剂硅胶频繁破碎现象进行优化。在找出硅胶破碎原因的基础上,通过吸附塔直径放大18.3%,引出部分尾气,使床层流速降低。在吸附塔进口管处,安装雾沫分离器;在硅胶前沿填充部分耐水硅胶以减少液态水的冲击。再生蒸汽加热管上加调节阀防止硅胶过分干燥。使A塔硅胶使用了540d,B塔硅胶使用了630d。     

氨基硫脲的研制

以硫氰酸铵和水合肼为原料，用丙酮作异构催化剂合成氨基硫脲。一次收率为８９．０３％，用５０％母液循环使用，收率达到９２．５％，产品质量符合要求。     

水合肼生产中氧化反应的研究和应用

分析了尿素法生产水合肼的氧化反应历程及影响因素，改进了反应器，并找到了最佳的工艺控制条件：①控制n(尿素)：n(次氯酸钠)=(1．05～1．10)：1，各原料的消耗较低，总经济效益佳；②采用-5℃冷冻盐水移走尿素、次氯酸钠混合段内氯化反应放出的热量，控制物料混合终点温度在15～30℃；③采用列管式加热器，将氯化反应与水解反应在不同的设备中进行，水合肼的收率提高到83％～85％；④采用列管式加热器代替双夹套反应器，提高了加热强度，生产能力大，1套合成反应器可生产1万t／a80％的水合肼。     

天然气管道事故严重度评价体系研究

为解决由于天然气管道管材的老化、腐蚀以及外力破坏引发事故的评价问题,以目标层、准则层和指标层3层结构体系,构建了天然气管道事故严重度评价体系,该体系从管道类型、事故类型、事故发生地点和事故已有损失4个方面来评价事故的严重程度,采用百分制权重加和法得到事故严重度指标值G,依据G值大小将事故分为3个等级,评估结果可以为管理层提供参考,为制定天然气管道事故抢修抢险方案起到导向作用.     

Surface performance of workpieces processed by electrical discharge machining in gas

The surface performance of workpieces processed by electrical discharge machining in gas(dry EDM)was studied in this paper.Firstly,the composition,micro hardness and recast layer of electrical discharge machined(EDMed)surface of 45 carbon steels in air were investigated through different test analysis methods.The results show that the workpiece surface EDMed in air contains a certain quantity of oxide,and oxidation occurs on the workpiece surface.Compared with the surface of workpieces processed in kerosene,fewer cracks exist on the dry EDMed workpiece surface,and the surface recast layer is thinner than that obtained by conventional EDM.The micro hardness of workpieces machined by dry EDM method is lower than that machined in kerosene,and higher than that of the matrix.In addition,experiments were conducted on the surface wear resistance of workpieces processed in air and kerosene using copper electrode and titanium alloy electrode.The results indicate that the surface wear resistance of workpieces processed in air can be improved,and it is related with tool material and dielectric.     

低雷诺数气液交叉流装置研究（I）——孔流液柱流动特性数值模拟

针对低雷诺数的气液交叉流气体净化过程,提出有效避免二次雾沫夹带的液柱流体力学条件。数值模拟结果表明,液柱表面随着离开孔口的距离而变化,采用公式Lb／d=2．84We^0.694能有效预测液柱的断裂行为。     

钯－银合金膜分离氢气的研究

采用厚为５０μｍ的Ｐｄ／Ａｇ（２３）合金膜进行了氢气渗透系数的测定和Ｈ＿２／Ｎ＿２混和气分离的研究，得出温度、压力、膜厚、进料气流量、膜的预处理和再活化及膜表面中毒等因素对氢气渗透的影响。分离Ｈ＿２／Ｎ＿２混和气可获得高纯氢气。