大面积水域浓度场测试方法及系统研究

针对大面积水域浓度场难以实现实时测量、测量精度不高等问题,采用了一种多通道荧光测试系统和方法。首先,基于单色光诱导荧光检测浓度(LIF)原理,使用探头获取离散点的浓度参数。然后,经总线或通信网络技术,将数百个测点连接起来。最后,通过数据总线或网络将采集的数据输送到中央测控计算机中,处理离散的数据后形成完整的浓度场。在恒定流浓度场中的试验结果表明,污染物测量相对误差均值不超过5%,单次测量相对误差最高值为8.33%,传感器线性度不超过5%,可检测的荧光素钠溶液浓度分辨率为0.001 ppm,系统测量稳定、精度较高。相较于其他浓度测量方法,该系统具有测量面积大、实时测量的优势,可为水污染防治等领域提供可靠的技术支撑。     

Experimental Investigation of Epoxy Bonded Polymethylmethacrylate Joints

This paper presents an experimental investigation into various aspects of epoxy-bonded polymethylmethacrylate (PMMA) and PMMA-to-aluminium joints. The effects of adhesive thickness, overlap area, surface roughness, and environmental exposure on the joint strength were studied. Results indicated that the joint strength was not directly proportional to the overlap area, while sanding had a positive effect on the joint strength. A negative effect was observed when adhesive thickness was increased. The fatigue behaviour of adhesively-bonded joints under dynamic loading was found to be independent of frequency, for the range of values tested; however, it was dependent on the test temperature with greater reduction in fatigue life observed in PMMA-to-aluminium joints at higher temperature. Empirical equations from which the fatigue life of joints can be predicted were obtained by regression analysis. Intermittent fatigue testing of the joints was also performed. The epoxy adhesive tested proved to be a satisfactory choice for outdoor exposure. The rate of degradation of the adhesive was slow with the adherend itself degrading at a faster rate than the adhesive or the bondline.     

Carbon Aerogels as Electrode Material in Supercapacitors

Due to their large specific surface area and their high electrical conductivity carbon aerogels are promising materials for electrodes in electrochemical double-layer capacitors (supercapacitor). The carbon aerogels were made via pyrolysis of resorcinol formaldehyde aerogels. The latter were prepared by supercritical and subcritical drying as well. The important findings of our investigation were, that the highest capacities of 46 F/cm³ were measured for samples with a density of about 800 kg/m³ pyrolyzed at 800°C. Also it was shown that RF-gels with molar resorcinol/catalyst ratios 1000 or higher can be dried subcritically without cracking or significant shrinkage. Carbon aerogels derived from these RF-aerogels have a small mesopore surface area, however an especially large micropore area. They provide electrical capacities which are most suitable for their use in supercapacitors.     

掺铈镧氧化锆触媒材料的研制

以锆、铈、镧的无机盐为原料 ,采用共沉淀法制备了含CeO2 -La2 O3的ZrO2 复合氧化物触媒材料。通过改变铈化合物和镧化合物的添加量及焙烧温度来考察其对比表面积和主晶相的影响。利用XRD、BET、DTA等分析手段对合成的复合氧化物的部分性质和主要晶相进行检测分析 ,结果表明加入氨水作沉淀剂及铈化合物和镧化合物添加量一定时可得到以四方相为主的ZrO2 晶相 ,比表面积较大 ;通过碳—氢转化率的测定 ,碳氢转化率在 60 0℃可达到 80 % ,表明具有一定的触媒性能     

鄂尔多斯盆地镇北地区三叠系延长组长8油组储层特征

鄂尔多斯盆地镇北地区延长组长8油层段是盆地重要的储集层之一。通过储层岩石学、储层物性、孔隙结构等方面对储层特征进行深入研究,研究结果表明,储层岩石类型主要为中细粒长石砂岩和岩屑长石砂岩,成分成熟度低,结构成熟度中—高;发育粒间孔隙、溶蚀孔隙、晶间孔等孔隙类型,喉道以中细喉—细喉为主。岩石物性总体较差,属低孔、低渗砂岩储层。研究结果对油田开发具有重要的指导意义。     

川中丘陵区地表干湿长程相关性及影响因素研究（研究生论坛）

为探究川中丘陵区干湿动态动力学机制,提供旱涝预测的理论依据。根据川中丘陵区8个气象站点1958~2013年逐日气象资料,采用Penman—Monteith 模型计算潜在蒸散量,构建出湿润指数。在此基础上,基于去趋势波动分析方法（DFA）,对逐月、分季节、极端干湿湿润指数进行长程相关性分析,并探讨了影响湿润指数长程相关性的气象因子。结果表明：除南充、遂宁外,其余地区逐月湿润指数变化长程相关,并非完全随机;分季节与极端干湿湿润指数均具有长程相关性;对于不同季节而言,长程相关性以夏季最强,秋、冬两季次之,春季最弱,对于极端气候而言,极端湿润长程相关性强于极端干旱;通过对湿润指数与气象因子长程相关性一致性分析,降水标度指数与湿润指数标度指数呈显著正相关。     

Epileptic seizure classification in EEG signals using second-order difference plot of intrinsic mode functions

Epilepsy is a neurological disorder which is characterized by transient and unexpected electrical disturbance of the brain. The electroencephalogram (EEG) is a commonly used signal for detection of epileptic seizures. This paper presents a new method for classification of ictal and seizure-free EEG signals. The proposed method is based on the empirical mode decomposition (EMD) and the second-order difference plot (SODP). The EMD method decomposes an EEG signal into a set of symmetric and band-limited signals termed as intrinsic mode functions (IMFs). The SODP of IMFs provides elliptical structure. The 95% confidence ellipse area measured from the SODP of IMFs has been used as a feature in order to discriminate seizure-free EEG signals from the epileptic seizure EEG signals. The feature space obtained from the ellipse area parameters of two IMFs has been used for classification of ictal and seizure-free EEG signals using the artificial neural network (ANN) classifier. It has been shown that the feature space formed using ellipse area parameters of first and second IMFs has given good classification performance. Experimental results on EEG database available by the University of Bonn, Germany, are included to illustrate the effectiveness of the proposed method.     

Measurement of the size, shape and orientation of convex bodies

Different types of solid bodies (particles) with specific shape and size are needed for industrial processes. For spherical particles, ‘sizer’ measurements are usually reported as sphere diameters. For non-spherical particles, particle shape and especially orientation must be taken into account. Particles of a specific shape will present different views when looked at from different directions.We have employed a Camsizer^® instrument to measure the distribution of projected area under different physical conditions for solid cylindrical particles:

•

Under ‘ideal’ conditions, corresponding to a uniform distribution of particle orientation, measurements agreed with predictions. The celebrated theorem of Cauchy applies only to this case.

•

For two other situations, measured and predicted results differed. However, from the experimental data it was possible to infer the particle orientations and hence theoretically predict the projected area distribution. Excellent agreement between theory and practice was then restored.

     

Removal of chromium (VI) from dilute aqueous solutions by activated carbon developed from Terminalia arjuna nuts activated with zinc chloride

Different structured activated carbons were prepared from Terminalia arjuna nuts, an agricultural waste, by chemical activation with zinc chloride for the adsorption of Cr(VI) from dilute aqueous solutions. The most important parameter in chemical activation was found to be the chemical ratio (activating agent/precursor, g/g). Carbonization temperature and time are the other two important variables, which had significant effect on the pore structure of carbon. A high surface area of was obtained at a chemical ratio of 300%, carbonization time and temperature of 1 h and 500 °C, respectively. The activated carbon developed shows substantial capability to adsorb Cr(VI) from dilute aqueous solutions. The parameters studied include pH, adsorbent dosage, contact time, and initial concentrations. The kinetic data were best fitted to the Lagergren pseudo-first-order model. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models. The maximum removal of chromium was obtained at pH 1.0 (about 99% for adsorbent dose of 2 g/l and 10 mg/l initial concentration).     

中国建筑涂料工业的现状及当前形势下的发展对策

本文详细分析了中国建筑涂料工业的现状和存在问题，并结合当前形势，提出了中国建筑涂料工业的发展对策。