AZ91D镁合金电偶腐蚀的研究

在自来水和3.5%NaCl溶液中测试了铸造AZ91D镁合金与铝合金、锌合金、Q235碳钢和Cu偶合后的电偶腐蚀行为,研究了腐蚀环境、偶接材料和阴阳极面积比(CAAR)对铸造AZ91D镁合金电偶腐蚀行为的影响。在电偶腐蚀过程中测量溶液的pH值以及电偶腐蚀电流;用失重法计算了铸造AZ91D镁合金的电偶腐蚀速率,利用SEM观察了AZ91D镁合金的腐蚀形貌,并对腐蚀产物进行XRD分析。结果表明,AZ91D镁合金在电偶腐蚀过程中会使溶液的pH值升高,并伴有以Mg(OH)₂为主的腐蚀产物的生成;溶液中Cl^-的存在会加速AZ91D镁合金的电偶腐蚀速率;低氢过电位金属Q235碳钢和Cu对AZ91D镁合金的电偶腐蚀加速效果明显高于中氢过电位金属铝合金和锌合金,偶接材料的极化性能对AZ91D镁合金的电偶腐蚀速率有较大影响。同时,大的阴阳极面积比会加速AZ91D镁合金的电偶腐蚀速率,且AZ91D镁合金的电偶腐蚀电流随阴阳极面积比的增大而呈线性增长趋势。     

波纹板填料表面液体降膜流动的特性分析

基于降膜流动实验台,结合计算流体力学方法(Computational Fluid Dynamics, CFD)研究了波纹板表面液体的平均液膜厚度和有效润湿面积等定量信息,并通过三维模拟进一步分析了喷淋密度和波纹倾斜角度β对降膜流动特性的影响。结果表明,液体在波纹板表面的流动并非均匀,分为沟流和溪流两种形式;当喷淋密度较小时,液体在波谷内形成沟流,当喷淋密度达到400 m3/(m2?h),液体跨越相邻波纹进行溪流流动;两种形式波纹板整体的润湿性能均较差,且液膜厚度分布不均;波纹倾斜角度对降膜流动特性影响较大,90°时更有利于提高有效润湿面积。     

The effect of operating and design parameter on bubble column performance: The LOPROX case study

It is known that the performances of multi-phase reactors depend on the operating parameters (the temperature and the pressure of the system), the phase properties, and the design parameters (the aspect ratio (AR), the bubble column diameter, and the gas sparger design). Hence, the precise design and the correct operation of multi-phase reactors depends on the understanding and prediction of the fluid dynamics parameters. This paper contributes to the existing discussion on the effect of operating and design parameter on multi-phase reactors and, in particular, it considers an industrial process (e.g., the LOPROX (low pressure oxidation) case study, which is typical example of two-phase bubble columns). Based on a previously-validated set of correlations, the influence of operating and design parameter on system performances is studied and critically analyzed. First, we studied the effects of the design parameter on the liquid–gas interfacial area, by keeping constant the fluid physical–chemical properties as well as the operating conditions; subsequently, we discussed for a fixed system design, the influence of the liquid phase properties and the operating pressure. In conclusion, this paper is intended to provide guidelines for the design and scale-up of multi-phase reactors.     

Influence of anode current density on carbon parasitic reactions during electrolysis

In the electro-deoxidation process, carbon parasitic reaction (CO₃^2- + 4e^-=C + 3O^2-) usually occurs when using carbon materials as the anode, which leads to increase of the carbon content in the final metal and decrease of the current efficiency of the process. The aim of this work is to reduce the negative effect of carbon parasitic reaction on the electrolysis process by adjusting anode current density. The results indicate that lower graphite anode area can achieve higher current density, which is helpful to increase the nucleation site of CO₂ bubbles. Most of CO₂ would be released from the anode instead of dissolution in the molten CaCl₂ and reacting with O^2- to form CO₃^2-, thus decreasing the carbon parasitic reaction of the process. Furthermore, the results of the compared experiments show that when the anode area decreases from 172.78 to 4.99 cm², CO₂ concentration in the released gases increases significantly, the carbon mass content in the final metal product decreased from 1.09% to 0.13%, and the current efficiency increased from 6.65% to 36.50%. This study determined a suitable anode current density range for reducing carbon parasitic reaction and provides a valuable reference for the selection of the anode in the electrolysis process.     

Material removal profile prediction and experimental validation for obliquely axial ultrasonic vibration-assisted polishing of K9 optical glass

K9 optical glass is one of the typical components in optical systems. However, because of its poor fracture resistance, it is difficult to polish it with ultra-precision and high-efficiency and without any surface damage simultaneously. The emergence of the obliquely axial ultrasonic vibration-assisted polishing (UVAP) method can solve this problem which encounters in polishing efficiency and shape accuracy. However, due to the unclear material removal profile (MRP) mechanism, obliquely axial UVAP is not widely used in the processing field. This paper introduces the obliquely axial UVAP method in research processes, mainly focusing on the fixed point MRP analysis of the obliquely axial UVAP. Based on Hertz's contact theory, polishing pressure, the length of the semi-long axis (LLA) and the length of the semi-short axis (LSA) of the contact area are calculated under ultrasonic vibration conditions. Meanwhile, the relative linear velocity distribution of the oblique polishing tool in the instantaneous contact area is modeled by mathematical geometry method. A novel model of the MRP distribution for obliquely axial UVAP is proposed following the Preston equation. Subsequently, a series of polishing experiments were carried out to verify this model. The results show that the numerical model has good agreement with the experimental results on MRP, LLA, LSA, material removal depth and material removal rate (MRR). In addition, the material removal capability can be significantly improved by larger ultrasonic amplitude and larger oblique angle. This model not only more clearly elucidates the processing mechanism of obliquely axial UVAP, but also provides theoretical support for the polishing of free-form optical lenses.     

2Cr13/N80在含有HAc的饱和CO2盐溶液中的电偶腐蚀行为研究

通过电化学测量方法研究了2Cr13/N80电偶对在不同HAc浓度的饱和CO2溶液中的电偶腐蚀行为。考察了HAc浓度、阴阳极面积比对电偶腐蚀的影响规律,结果表明:随HAc浓度的增加,2Cr13/N80偶对间的电偶电位差下降;加入醋酸后偶对间电偶电流密度变化复杂,不仅受偶对间电位差的影响,还受阴、阳极极化率的共同作用影响。阴阳极面积比增大,电偶电流密度也增大。     

Novel approach to correlate degree of surface deterioration to coating impedance for laboratory test panels coated with two types of primers

Abstract

Relationships between deteriorated coating surface conditions of laboratory test panels determined by image processing software and coating impedance data collected with electrochemical impedance spectroscopy (EIS) were investigated. A unique relationship was found between the log?|Z|_0·1 values of experimental EIS data and the corresponding deteriorated area ratios determined by the image processing method. A well defined one to one relationship was also found between log?|Z|_0·1 values and log?(R_po) values extracted through EIS data fitting analysis. This study demonstrates that estimation of log?(R_po) at a certain deterioration stage is feasible via field image processing alone without running in situ EIS measurements and going through time consuming EIS fitting analysis. A field coating maintenance program established by this methodology can be an effective tool for bridge maintenance engineers who need to make timely decisions on coating repair/rehabilitation work based on the quantitative ‘visual’ image scan results and ‘invisible’ coating pore resistance.     

Salt-assisted solution combustion synthesis of NiFe2O4: Effect of salt type

The effects of three types of salt including NaF, KCl, and NaCl on the properties of NiFe₂O₄ nanoparticles using salt-assisted solution combustion synthesis (SSCS) have been investigated. The synthesized powders were evaluated by SEM, TEM, FTIR, XRD, and VSM analysis. Also, the specific surface area (SSA), as well as size distribution and volume of the porosities of NiFe₂O₄ powders were determined by the BET apparatus. The visual observations showed that the intensity and time of combustion synthesis of nanoparticles have been severely influenced by the type of salt. The highest crystallinity was observed in the synthesized powder using NaCl. The SSA has also been correlated completely to the type of salt. The quantities of SSA was achieved about 91.62, 64.88, and 47.22 m²g^-1 for the powders synthesized by KCl, NaCl, and NaF respectively. Although the magnetic hysteresis loops showed the soft ferromagnetic behavior of the NiFe₂O₄ nanoparticles in all conditions, KCl salt could produce the particles with the least coercivity and remanent magnetization. Based on the present study, the salt type is a key parameter in the SSCS process for the preparation of spinel ferrites. Thermodynamic evaluation also showed that the melting point and heat capacity are important parameters for the proper selection of the salt.     

崩落采矿形成冰碛补给型泥石流相似模拟试验

崩落采矿法形成的冰碛补给型泥石流作为发育在高寒山区的特殊地质灾害类型,给矿山的安全高效开采造成了严重影响.为研究崩落空间发展过程与泥石流之间的关系,开展了相似模拟试验,模拟降雨条件下崩落采矿法的放矿过程,研究矿石、冰碛物、水等3种因素对泥石流形成的影响,结果表明:随着放矿的进行,矿石中混有地表冰碛物的量越来越多,放出的...