各种新型导线的特点及经济选型方法

本文介绍了目前广泛应用的各种新型导线的类型及特点。通过工程实例,提出了基于输电线路整个经济寿命周期的选型公式,适合在工程设计中应用。     

An optimized Ni doped LiFePO4/C nanocomposite with excellent rate performance

Both Ni doping and carbon coating are adopted to synthesize a nano-sized LiFePO₄ cathode material through a simple solid-state reaction. It is found that the Ni²⁺ has been successfully doped into LiFePO₄ without affecting the phospho-olivine structure from the XRD result. The images of SEM and TEM show that the size of particles is distributed in the range of 20-60 nm, and all the particles are coated with carbon completely. The results of XPS show the valence state of Fe and Ni in the LiFePO₄. The electronic conductivity of the material is as high as 2.1 × 10⁻¹ S cm⁻¹, which should be ascribed to the coefficient of the conductive carbon network and Ni doping. As a cathode material for lithium-ion batteries, the Ni doped LiFePO₄/C nanocomposite delivers a discharge capacity of 170 mAh g⁻¹ at 0.2 C, approaching the theoretical value. Moreover, the material shows excellent high-rate charge and discharge capability and long-term cyclability. At the high rates of 10 and 15 C, this material exhibits high capacities of 150 and 130 mAh g⁻¹, retaining 95% after 5500 cycles and 93% after 7200 cycles, respectively. Therefore, the as-prepared material is capable of such large-scale applications as electric vehicles and plug-in hybrid electric vehicles.     

生命周期评价（LCA）与固废资源化

针对固体废弃物特点和近年来固体废弃物处理情况及废弃物资源化趋势,介绍了生命周期评价（LCA）的概念及特征,具体阐述了LCA的内容及框架,探讨了将LCA应用于固废资源化决策的合理性和可行性,以促进其在环保领域的推广应用。     

Start‐Up Characteristics of Segmented‐In‐Series Tubular SOFC Power Modules Improved by Catalytic Combustion at Cathodes

For large‐scale SOFC power generation systems, a shorter start‐up time of SOFC cell stacks with relatively large heat capacity is one of the most important technological issues to determine the flexibility in SOFC system operation. In this study, start‐up procedures have been examined to shorten the start‐up time period. The conventional heating procedure using pre‐heated hot air and self‐heating by SOFC operation at low temperatures had a difficulty to shorten the start‐up time period because of the limitation in power generation at lower temperatures. In this study, as an alternative start‐up procedure, catalytic combustion at the SOFC cathodes is, for the first time, demonstrated to be useful on the system level. The applicability of the catalytic combustion to shorten the start‐up time period has been verified numerically as well as experimentally by using a large‐scale cell stack cartridge. This unique start‐up procedure enables to operate SOFC‐based large‐scale power generation systems.     

不同工质对内置换热器有机朗肯循环系统热性能的影响

有机朗肯循环(Organic Rankine Cycle,ORC)可实现中低温热能的有效利用,但其热利用效率仍可进一步提高,而内置换热器的使用可有效提高循环的热利用效率。因此,文章构建了内置换热器ORC系统的热力学模型。研究了当蒸发温度变化时,R600,R601a,R236ea,R245fa,R245ca,R123,R600a,R114和R142b对内置换热器ORC系统性能的影响,并比较了内置换热器ORC系统与传统ORC系统的净输出功率和热效率。结果表明:在最优蒸发温度下,采用R236ea的内置换热器ORC系统净输出功率大于其余工质,为32.40 kW,其比第二最大净输出功率R600a系统相对增大1.16%;采用R601a的内置换热器ORC系统的热效率最大。内置换热器ORC系统的最大净输出功率及热效率均较传统ORC系统显著增大。     

全生命周期城铁车辆空调系统节能技术分析

根据成熟项目的应用经验以及行业前沿技术,从全生命周期的角度阐述城铁车辆空调系统的节能关键技术。设计阶段城铁车辆可选择配置直流直进空调机组,进行K值理论计算优化整车隔热设计,优化座椅-侧墙回风方式的隔热措施,合理布置客室温度传感器以及应用变风量VAV控制系统,实现空调系统节能;阐述了运营阶段变新风技术和自动温控技术。提出维保阶段可配置PHM系统实现状态检修,保持机组健康状态,以及进行风道清洗提高整个空调系统能效比。     

闭式循环柴油机（CCD）特性的仿真研究

通过建模仿真,分析了闭式循环柴油机系统运行与系统总压、系统中CO2比例、吸收用水流量以及柴油机选型之间的内在关系,确定了保证系统正常工作的特性参数,并对系统的动态特性进行了初步研究。     

Comparison of the surface changes on cathode during long term storage testing of high energy density cylindrical lithium-ion cells

Nickel-based oxide cathode material taking out from lithium-ion cell after storage for 2 years at 45 °C is analyzed by electron energy-loss spectroscopy in a scanning transmission electron microscope (STEM-EELS) and the result of STEM-EELS is compared with cobalt-based oxide cathode material which is treated as same manor as nickel-based oxide cathode material. The Ni-L_2,3 energy-loss near-edge structure (ELNES) spectra of nickel-based oxide cathode material show peak positions similar to original material before storage. This result indicates that nickel-based oxide material has no significant change in the surface structure. On the other hand, a remarkable shift to low energy is observed in the Co-L_2,3 ELNES spectra of the cobalt-based oxide cathode material after storage. The cycle test at 60 °C under the conditions of aggressive driving cycle (US06) mode for the nickel-based oxide cathode/graphite cell is also carried out. It is clear that cycle performance of the nickel-based oxide cathode/graphite cell is dependent on the depth of discharge (DOD).     

Kinetic characterization for hemicellulose hydrolysis of corn stover in a dilute acid cycle spray flow-through reactor at moderate conditions

The kinetic characterization of hemicellulose hydrolysis of corn stover was investigated using a new reactor of dilute acid cycle spray flow-through (DCF) pretreatment. The primary purpose was to obtain kinetic data for hemicellulose hydrolysis with sulfuric acid concentrations (10-30 kg m⁻³) at relatively low temperatures (90-100 °C). A simplified kinetic model was used to describe its performance at moderate conditions. The results indicate that the rates of xylose formation and degradation are sensitive to flow rate, temperature and acid concentration. Moreover, the kinetic data of hemicellulose hydrolysis fit a first-order reaction model and the experimental data with actual acid concentration after accounting for the neutralization effect of the substrates at different temperatures. Over 90% of the xylose monomer yield and below 5.5% of degradation product (furfural) yield were observed in this reactor. Kinetic constants for hemicellulose hydrolysis models were analyzed by an Arrhenius-type equation, and the activation energy of xylose formation were 111.6 kJ mol⁻¹, and 95.7 kJ mol⁻¹ for xylose degradation, respectively.     

Life cycle cost and energy analysis of a Net Zero Energy House with solar combisystem

The Net Zero Energy House (NZEH) presented in this paper is an energy efficient house that uses available solar technologies to generate at least as much primary energy as the house uses over the course of the year. The computer simulation results show that it is technically feasible to reach the goal of NZEH in the cold climate of Montreal. In terms of the life cycle energy use, which considers the operating and embodied energy of the house, the energy payback time is 8.4–8.7 years, when the NZEH is compared with an average house that complies with the provincial code. The energy payback ratio of the combisystem is 3.5–3.8 compared with the heating system of conventional house. By converting solar energy, the combisystem supplies at least 3.5 times more energy than the energy invested for manufacturing and shipping the system. The life cycle cost analysis of the NZEH shows, however, that due to the high cost of the solar technologies and the low cost of electricity in Montreal, financial payback is never achieved.