A novel methanol-tolerant Ir-Se chalcogenide electrocatalyst for oyxgen reduction

A novel methanol-tolerant oxygen-reduction catalyst, Iridium-selenium (Ir-Se) chalcogenide, was synthesized by chemical precipitation in an organic solvent. Auger electron spectroscopy (AES) analysis confirmed that the synthesized Ir-Se chalcogenide had a chemical formula of Ir₄Se. This chalcogenide showed strong catalytic activity towards the oxygen reduction reaction (ORR) and a high methanol tolerance. It was found that most of the oxygen could be directly reduced to water through a four-electron pathway with less than 10% hydrogen peroxide (H₂O₂) being produced during the ORR. The improvement in catalytic activity of the Ir-Se chalcogenide in comparison with that of pure Ir might be attributed to the effect of a bimetallic interaction.     

ANALYSIS OF EXPERIMENTAL AND NUMERICAL RESULTS OF A TURBULENT SWIRLING FLOW IN A TUBE

In many applications swirling flow is used to enhance heat and mass transfer. One of the problems of modelling a turbulent swirling flow is the choice of the turbulent closure model which is acceptable for engineering purposes. To evaluate which model performs best, numerical results are compared with experimental data. Local velocity measurements are carried out on a swirling flow in a circular tube. The measurement method is hot-wire anemometry combined with visualization techniques. The numerical analysis is carried out using the k-ε model and the Algebraic Stress Model. In the experiment a symmetrical swirl was observed, Comparing the experimental data with the numerical results shows that the Algebraic Stress Model represents the experimental data quite well, whereas the k-ε model fails.     

RADIOACTIVE OR NATURAL TRACER。TECHNIQUES FOR LEAK DETERMINING OF DAM ABUTMENT

Infiltration and localization of preferential infiltration zones at the dam abutment are measured using radioactive tracer tests of flow in boreholes,meanwhile interconnection between boreholes and the energing water points is analysed.The theory and practice of radioactive tracer synthetic detective method are described to give methods and calculation formulae used under the condition of stable flow in single well to measure permeability coefficient and hydrostatic heads.Major single hole techniques including measurement for seepage line,velocity,rate of seepage flow and relationship of recharge of groundwater in aquifers are introduced briefly.The possibilities offered by natureal tracers are analysed,uincluding electric-conduct,pH-value and temperature of water as well as stable isotopes(D,^18O) and tritium.Furthermore,the sensibilities of this theory and methods were confirmed by detecting seepage flow field of Xinanjiang Dam.     

Forest harvesting in rural properties: Risks and worsening to the worker’s health under the ergonomics approach

Through an ergonomic approach, this study aimed to evaluate whether workers involved in forest harvesting activities in rural properties are subject to the development of work-related diseases, as well as their consequences. A cross-sectional study with 267 forest workers in rural properties in the Brazilian Central region was used. The following evaluations were performed for each of the activities (felling, delimbing, tracing, manual extraction and manual loading): physical workload evaluation; biomechanical evaluation; risk of repetitive strain injuries/work-related musculoskeletal disorders; environmental noise and vibration factors, where relevant, and thermal overload through the Wetbulb Globe Temperature index. The results showed that in general the physical workload was very high, exceeding the cardiovascular load limits and adding to the need for work reorganization. All activities exposed workers to serious and imminent risks of developing injuries to the spine and lower limbs. Likewise, in general the risk of the appearance of RSI/WMSDs was very high for all activities evaluated. Such results are due to the combination of organizational work factors and factors of the work environment such as exposure to bad weather, uneven terrain, lifting and handling loads above tolerable limits, excessive noise and thermal overload. All of this allows to conclude that ergonomic risks and workers’ health hazards in forest harvesting in rural properties are latent and very worrying, and that these workers are exposed to a form of labor exploitation that invariably leads to physical and emotional exhaustion and therefore to their decreased labor capacity and useful working life.     

A CALPHAD-type Young's modulus database of Ti-rich Ti–Nb–Zr–Mo system

Accurate Young's modulus is the necessity for the design of biomedical Ti alloys. A combinatorial method of the diffusion couple, nanoindentation, electron probe microanalysis (EPMA), and CALculation of PHAse Diagrams (CALPHAD) techniques has been utilized to construct the Young's modulus database of Ti alloys with various compositions in the present work. Two groups of body-centered cubic (bcc) Ti–Nb–Zr–Mo quaternary diffusion couples annealed at 1273 K for 25 h were experimentally prepared. Subsequently, the composition-dependent mechanical properties in the wide compositional range of Ti-based alloys were obtained by using EPMA and nanoindentation probes. Finally, on the basis of the measured Young's moduli in the present and previous work and the modeling parameters of Young's modulus of Ti–Nb–Zr system, the Young's modulus database of bcc Ti–Nb–Zr–Mo system was established through the CALPHAD approach. The CALPHAD-type database of bcc Ti–Nb–Zr–Mo system can provide the accurate Young's moduli of Ti alloys with wide compositions.     

凝固过程中的颗粒推斥

颗粒推斥是材料在固液相变过程中的基础问题之一，界面自由能的传统理论难以解释在金属基复合材料制备过程中的颗粒推斥现象，作者提出了固液界面前沿的流体流动是颗粒推斥的主要原因之一，并给出颗粒滚动及颗粒速度两种作用机制，推导出颗粒推斥条件判据，并以实验验证流体流动的作用机制及颗粒推斥理论判据。     

INVESTIGATION OF THE USE OF LASER-DOPPLER VELOCIMETRY IN TWO-PHASE BUBBLY FLOWS

Understanding the dynamic phenomena of viability loss of shear sensitive cells and bubble breakage and coalescence within airlift reactors requires knowledge of local, liquid-phase hydrodynamics. The laser-Doppler velocimeter (LDV) is a non-invasive instrument which may be used to obtain this information. Experimental procedures and software were developed to detect and measure Doppler bursts in two-phase flow in a split-cylinder airlift reactor. Off-line analysis of the data indicated a detection rate approximately one order of magnitude greater than that observed using an available commercial frequency tracker. Approximately 400 to 500 observations are needed for the ensemble mean to characterize the local mean velocity to within ±5% for a superficial gas velocity of 10.4 cm/s, the highest superficial gas velocity used in these studies. The limitations, prospects, and signal-processing options for LDV in this application are also discussed     

Kinetics of volume expansion during infusion of Ringer’s solution based on two volume model

In this work mathematical models were developed to represent the kinetics of volume changes of fluid spaces associated with infusion of Ringer’s solution. During infusion of Ringer’s solution, the human body is assumed to be characterized by the two-fluid space model which has second volume space in addition to the first volume so that fluid exchanges between these two spaces are possible. Various infusion types were tested to accommodate different medical situations. Volunteers were given Ringer’s solution and the changes in blood hemoglobin were detected. From the comparison with experimental data, the two-fluid space model was found to represent adequately the kinetics of human volume expansion during infusion of Ringer’s solution.     

Synthesis of tertiary poly(amido-amine)s with amido- and amino-groups randomly arranged along the macromolecular chain

A new synthesis of poly(amido-amine)s from bis (secondary amine)s and acryloyl chloride has been studied, leading to polymers in which the amido- and amino-groups are randomly arranged along the macromolecular chain. A poly(amido-amine) based on piperazine, chosen as the mother compound, has been fully characterized by ¹³C n.m.r. as well as by identification and quantitative evaluation of its hydrolysis products.     

Development of the meshless finite volume particle method with exact and efficient calculation of interparticle area

The Finite Volume Particle Method (FVPM) is a meshless method based on a definition of interparticle area which is closely analogous to cell face area in the classical finite volume method. In previous work, the interparticle area has been computed by numerical integration, which is a source of error and is extremely expensive. We show that if the particle weight or kernel function is defined as a discontinuous top-hat function, the particle interaction vectors may be evaluated exactly and efficiently. The new formulation reduces overall computational time by a factor between 6.4 and 8.2. In numerical experiments on a viscous flow with an analytical solution, the method converges under all conditions. Significantly, in contrast with standard FVPM and SPH, error depends on particle size but not on particle overlap (as long as the computational domain is completely covered by particles). The new method is shown to be superior to standard FVPM for shock tube flow and inviscid steady transonic flow. In benchmarking on a viscous multiphase flow application, FVPM with exact interparticle area is shown to be competitive with a mesh-based volume-of-fluid solver in terms of computational time required to resolve the structure of an interface.