氧化还原反应式配平中可能差错的几种情况

本文通过许多实例，指出了氧化还原反应式配平中可能出现的得失电子数不等或电荷数未配平、得失电子关系不对及反应式中酸碱性介质有错误等几种差错，并归纳了在酸碱性水溶液中平衡介质的方法。     

Characterization of nanoporous materials prepared from montmorillonite clay and its application to the decolorization of mare's milk oil

Nanoporous materials have been prepared by leaching the purified montmorillonite clay with sulfuric acid (H₂SO₄) solution with varying concentrations (0.5–2 M) at 80°C for 0.5–4 h. Acid leaching causes partial amorphisation of the clay with depletion of MgO, Al₂O₃, CaO and Fe₂O₃ components mostly from interlayer and octahedral sites. This increases the specific surface area by more than 3 times, i.e. from 49.1 to 157 m²/g. The pore-size distribution curves calculated from the adsorption isotherms of the leached montmorillonite show that most of the pores are in the mesoporous region with their diameter ranging 3–4 nm. This material turns out to be appropriate for bleaching of the mare's milk oil. The chemical and structural changes of the acid-leached montmorillonite are discussed in terms of the decolorization capacity.     

Ozone Contribution in Food Industry in Japan

Ozone has the strongest oxidization effect after fluorine, and this property has been used in sterilization for food and processing plants in Japan. Moreover, there is no fear of toxic residues as with chlorine-based sterilizers and no hazardous trihalomethanes are formed. Based on these advantages, ozone has been used in water and air treatment for food products food materials and food processing plants. Use in the food processing is now increasing in Japan. This paper describes ozone sterilization, introducing sterilization systems and equipment applied to food in Japan.     

Neutralizing capacity of bottom ash from municipal solid waste incineration of different particle size

This study measures the neutralizing capacity of bottom ash from municipal solid waste incineration of different particle sizes. We examine the effect of particle size on the weathering process, a method popularly used for stabilization of heavy metals in incineration of bottom ash. The distribution of particle sizes in municipal solid waste incineration bottom ash is rather broad, ranging from fine powder to as large as 40 mm in diameter. Although considered a by-product highly suitable as a road construction material, the high level of heavy metal leaching is an obstacle to its reuse. Weathering, a method used to reduce heavy metal leaching, is a lengthy process taking over thee months to complete. The chief reaction involved in weathering is carbonation occurring between Ca(OH)2 in bottom ash and CO₂(g) in the atmosphere. During this process, CaCO₃ is produced, causing the pH level to drop from over 12 to about 8.2 and reducing heavy metal leaching. In this paper, we attempt to determine the particle size best suited for reducing the period required for weathering bottom ash by identifying characteristics of different particle sizes that affect heavy metal leaching and neutralization.     

交联型单分散聚苯乙烯微球的制备

以聚乙烯吡咯烷酮（PVP）为分散剂，偶氮二异丁腈（AIBN）为引发剂，乙醇为分散介质，二乙烯基苯（DVB）为交联剂进行了苯乙烯（St）的分散聚合；讨论了引发剂、交联剂、分散剂、单体用量对聚合物粒径及分布的影响，制备了交联型单分散聚苯乙烯微球。实验表明：当交联剂质量分数达到单体质量分数的1％时，微球依然可以保持良好的单分散性。在聚合体系中引入抗坏血酸，使其与微量的氧结合，有效地提高了微球的均匀度。     

Liquid-liquid equilibrium for the quaternary system of o-xylene(1)+water(2) +propionic acid(3)+1-butanol(4) at 298.15 K and atmospheric pressure

The liquid-liquid equilibrium for the quaternary system of o-xylene(1)+water(2)+propionic acid(3)+1-butanol(4) was measured at 298.15 K and atmospheric pressure. Binodal curves, tie-lines, a distribution curve, and a selectivity curve for the quaternary system have been determined in order to investigate the effect of binary solvents, oxylene and 1-butanol, on extracting propionic acid from aqueous solution. In addition, these experimental tie line data were also compared with the values predicted by the UNIFAC model. In this study, the UNIFAC model was capable of predicting the compositions of this quaternary system within an average RMSD of 1.13 mol%. This paper was prepared at the 2004 Korea/Japan/Taiwan Chemical Engineering Conference held at Busan, Korea between November 3 and 4, 2004.     

酸性气流脱除物STW-3#对NR硫化性能影响的研究

酸性气流脱除物是净化天然气、合成气、煤气时脱除的物质，STW-3#是由该物质制成的样品之一。就STW-3#对NR硫化性能的影响进行了研究。结果表明，STW-3#对NR有较好的硫化促进特性和一定的软化增塑作用；其用量3.0份以下时，硫化特性较差，3．0份以上时硫化特性较好，但超过4．0份时有粘辊和喷霜现象。它与促进剂M并用时，硫化特性与促进剂D相似。     

熔融缩聚法制备聚乳酸

通过熔融缩聚法制备了聚乳酸。探讨了反应温度、催化剂类型及用量、反应时间对聚乳酸的影响，并用红外光谱和1↑H NMR对聚合物进行了表征。结果表明，最佳的反应条件为：聚合时间30h左右、聚合温度160℃、以O．2％的对甲苯磺酸作为酸催化剂、O．5％的氯化亚锡为催化剂、真空度为O—1333Pa；而提高乳酸纯度是制备高摩尔质量聚乳酸的关键条件之一。     

CONCENTRATED ACID CONVERSION OF PINE SOFTWOOD TO SUGARS. PART I: USE OF A TWIN-SCREW REACTOR FOR HYDROLYSIS PRETREATMENT

The first stage of a two-step concentrated sulfuric acid process that converts softwood sawdust to sugars has been explored. The research focuses on the ability of an in-house custom fabricated corotating twin-screw reactor (TSR) to effectively break down and solubilize crystalline cellulose into low molecular weight carbohydrates. Based on design of experiment (DOE) screening results, a four-level, two-factor experimental model building DOE was undertaken. Solid sawdust conversion to liquid, screw torque, and TSR exit pressure were measured or recorded at each experimental condition to yield percent conversion of solids, processed material viscosity, and material energy requirements. Thereafter, model quadratic equations were fitted to the experimental data and found to be statistically significant. Based on data obtained in the DOE the process was optimized to establish a base case operating condition. The acid-treated product made at base case twin-screw operating conditions showed a 38.2% conversion of dry sawdust solids to soluble liquids. The dry solids conversion reduced 73.8% of all hemicellulose and 44.4% of all cellulose to soluble monomers and oligosaccharides.     

New synthesised pyridazine derivatives as effective inhibitors for the corrosion of pure iron in HCl medium

The inhibition of pure iron in 1 M HCl by new synthesised pyridazine compounds has been studied by weight loss, electrochemical polarisation and electrochemical impedance spectroscopy (EIS) measurements. The results obtained reveal that these compounds are efficient inhibitors. The inhibition efficiency increases with the increase of inhibitor concentration and reached 98% at 10⁻⁴ M for 5-benzyl-6-methyl pyridazine-3-thione. Potentiodynamic polarisation studies clearly reveal that the presence of pyridazines does not change the mechanism of hydrogen evolution and that they act essentially as cathodic inhibitors. The temperature effect on the corrosion behaviour of pure iron in 1 M HCl without and with the pyridazines at 10⁻⁴ M was studied in the temperature range from 298 to 353 K. EIS measurements show that the increase of the transfer resistance with the inhibitor concentration.