渗透汽化汽油脱硫技术研究进展

随着环保法规的日益严格,世界各国对清洁汽油中硫含量做出了严格的规定,汽油的低硫化甚至无硫化已成为一种必然趋势,汽油的深度脱硫技术已成为各石油公司和相关研究者的研究热点。渗透汽化是一种新型高效的膜分离技术,其在汽油深度脱硫技术方面具有独特优势。介绍了渗透汽化汽油脱硫技术的基本原理、工艺特点及国内外有关研究进展情况。     

Pyrolysis of peat: Product yield and characterization

Pyrolysis of peat obtained from Yeniça?a, Bolu, Turkey was conducted in a fixed-bed tube furnace under various conditions, and variations in the structure of the char, tar and gas products were examined. The chars produced were studied by proximate and ultimate analyses. The maximum tar yield of 20.41% was obtained at a heating rate of 20 °C/min, a temperature of 450 °C, a sweeping gas flow rate of 100 ml/min and a 0.5–2.0 mm size range. The chemical composition of the tar was examined by elemental analysis, FTIR spectroscopy, ¹H-NMR spectroscopy and column chromatography. The chemical composition of the tar with dense aliphatic structure was established to be CH_1.22O_0.25N_0.02. The composition of the gases obtained at a heating rate of 20 °C/min for the 0.5–2.0 mm size range was examined by gas chromatography.     

影响裂解汽油二段加氢催化剂长周期运转因素及解决措施

从裂解汽油二段加氢催化剂性能、裂解汽油和操作条件等方面论述了影响该催化剂长周期运转的因素,并针对这些因素提出相应的措施,以达到延长催化剂运转周期的目的。     

Fabrication of suspended carbon microstructures by e-beam writer and pyrolysis

A fabrication process has been developed to create suspended carbon microelectromechanical system (C-MEMS) structures. SU-8, a negative photoresist, was used as the starting material and was converted to the desired carbon microstructures using pyrolysis in an inert atmosphere. Suspended carbon-micro and nano electromechanical system (C-MEMS/NEMS) structures with feature sizes down to 500 nm were fabricated by ultra violet/electron beam (EB) lithography and pyrolysis. The problem of charging of the non-conductive SU-8 surface was solved by partially masking a thin metal layer to prevent the repulsion of negative charged electrons before EB writing. Complex suspended C-MEMS structures, such as bridges and networks have been formed. This fabrication method can accurately and reproducibly produce various suspended C-MEMS structures which have applications in microelectronics and biosensing.     

CIP-1型裂解催化剂的研究

CIP-1裂解催化剂是一种多组元分子筛催化剂, 适用于催化裂解Ⅱ型工艺（DCC-Ⅱ）。该催化剂具有在生产高辛烷值汽油的同时多产丙烯及低碳异构烯烃的特点工业应用表明, 在反应温度505℃ 下汽油、丙烯、异丁烯和异戊烯的产率分别为40.98、12.52、4.57和5.78wt%, 在反应温度530℃下分别为38.45、14.43、4.75和5.93wt%.     

Carbon-encapsulated Fe nanoparticles from detonation-induced pyrolysis of ferrocene

Carbon-encapsulated Fe nanoparticles with size between 5 and 20 nm were synthesized via a picric acid-detonation-induced pyrolysis of ferrocene, which is characterized by a self-heating and extremely fast process. The nanoparticles exhibit well-constructed core-shell structures, with bcc-Fe cores and graphitic shells. The graphitic shells can protect effectively the cores against the attack of HNO₃ solution. The formation of the core-shell nanoparticles can be selectively controlled by adjusting the composition of the picric acid-ferrocene mixture, which determines C/Fe atomic ratio of the reaction system. The core-shell nanoparticles are preferably formed at low C/Fe atomic ratios, while tubular structures are formed at high C/Fe ratio. The possible pathway for the carbon-encapsulated Fe nanoparticles formation is discussed briefly.     

非常规汽油脱硫技术

水蒸气脱硫是一种以水代替氢的脱硫方法,降低脱硫成本显著。以酶代替传统加氢催化剂的生物脱硫技术是一个引人注目的课题。结合催化和精馏的催化精馏脱硫法,在选择脱硫的对象上,相对传统的催化脱硫更具优势。萃取脱硫是采用一些极性溶剂混合物脱除汽油馏分中的硫化物,须加入氧化助剂才有较好的脱硫效果,由此将导致大的辅助车间和有限脱硫效率。膜过程脱硫、声化学脱硫、等离子体和光脱硫都属于物理方法,环保意义很大。对于吸附脱硫,从流化催化裂化汽油中除硫完全,而汽油产率降低很少,辛烷值几乎没有损失,是一种有前途的脱硫方法。     

A kinetic model for polystyrene (PS) pyrolysis reaction

A mathematical model for the pyrolysis reaction of polystyrene (PS) in a semi-batch reactor has been presented. The thermal degradation of PS was flexibly modeled by a combination of random and specific chain-end scissions. Numerical simulation was used to investigate the effect of operating conditions on the PS products spectrum, the results of which were validated by the experimental data. It was found that as the reaction temperature increased (decreased), the monomer fraction in the products became lower (higher) while the trimer higher (lower). No significant variation in the product composition was, however, observed while constant temperature was maintained. These results indicate the reaction temperature is an effective manipulated variable for the control of products composition of PS pyrolysis. The calculation of the optimum temperature trajectories through the optimization study can thus be of interest for achieving productivity enhancement in plastics pyrolysis processes. This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement from Korea University.     

PAR分光光度法测定汽油中的痕量铅

研究了快速测定汽油中痕量铅的方法。测定经盐酸处理过的汽油与 PAR反应生成的络合物。该显色体系最大的优点是可在水相中直接用光度法测定样品中铅的含量。该配合物最大的吸收波长为 5 2 0 nm,ε52 0 =2 .2× 10 4 L· (m ol· cm ) - 1 ,Pb浓度在 0～ 2 5 .2μg· m L- 1 范围内线性关系良好 ,回归方程 A=0 .12 711C- 0 .0 6 2 93,相关系数为 0 .9992 ,检出限为 0 .4 1μg· m L- 1 。本方法显色迅速 ,稳定 ,操作简便 ,避免了使用氰化钾剧毒试剂 ,以及萃取等烦琐操作 ,可在 35 min内完成 1次测定