天然气吸附储存脱附过程的动态模拟

通过热动力学计算,认识了脱附过程当中储罐内温度剖面分布的典型特征:储罐轴心处的温度下降幅度最大。分析了脱附过程当中储罐壁的热交换、吸附剂的导热系数以及储罐内的初始压力对储罐内的温度剖面的影响。结论是加强储罐外壁的热交换、增大吸附剂的导热系数皆能改善吸附储罐内的温度剖面。     

复杂目标的近场散射特性分析

详细分析了目标散射随距离而变化的特征，根据散射特点的不同将目标的散射特性分为远场散射、准近场散射、近场散射等三种情况，并对三种情况下的描述的手段进行了讨论，提出在近场条件下，用反射功率比的概念直接对散射目标的特性进行描述。     

目标RCS动态数据的分布特征研究

复杂目标在不同视向的RCS分布特征是不同的，传统模型对此都没有给出详细的结果。文中以某歼击机和直升机为对象，应用X^2。分布、对数正态分布和瑞利分布模型，以及Kolmogomv拟合优度检验方法，研究其RCS动态测量数据的统计分布特征，得到了在一定显著性水平下，两种目标在不同视向角下对三种模型的拟合效果，同时得到应用X^2。分布拟合时模型半自由度随视向角的分布情况。在显著性水平为0．05时，对于在较短时间内录得的复杂目标动态RCS数据，应用X^2分布可以取得较好的拟合效果。文中结果精确地描述了目标RCS的起伏特征，能够为目标回波的精确模拟与检测提供可靠的依据。     

莱钢中小型连轧生产线技术装备状况及改进

介绍了莱钢引进的具有 90年代国际先进水平的中小型型钢连轧生产线的工艺、设备特点及主要技术参数 ,以及对原机械设备、电气及工艺备件的改进和新产品开发情况 ,均取得良好效果。     

环形截面大偏心受压构件截面延性系数计算

延性是混凝土构件的一项重要特性 ,延性系数是构件延性的度量 ,由于沿周边均匀配筋环形截面偏心受压构件受力计算的特殊性 ,至今没有一个较精确的计算公式。本文根据沿周边均匀配筋环形截面偏心受压构件的工作特点 ,采用常用应力应变关系和基本假设 ,提出了其延性系数的计算方法。     

中关村中心区水文地质及工程地质特征

本文全面、系统地分析了北京市中关村中心区的水文地质及工程地质特征 ,为该地区的工程建设提供可靠的地质资料     

WIN32线程同步方法分析与实现

文章分析了WIN32线程同步的一般方法，并提出了一种的经实践证实也是切实可行线的线程同步方法。     

A procedure to prepare cross-sectional samples for TEM

Cross-sectional transmission electron microscopy (XTEM) is an imaging technique particularly suited to the study of layered structures. For integrated electronic devices it has become a common practice to use XTEM to assess the shape and crystallinity of component layers as well as defect structures introduced by processing. A procedure for preparing samples to be viewed by XTEM is described.     

螺栓角钢钢节点的三维非线性有限元分析

对螺栓角钢钢节点半刚性连接采用非线性有限元分析方法 ,对连接中的主要构件的顶部、底部、腹板角钢、高强螺栓、梁翼缘、柱翼缘和柱翼缘加劲肋进行三维非线性有限元精细模拟 ,针对有无柱加劲肋、有无腹板角钢等几种连接的情况进行比较分析 ,探讨了螺栓角钢半刚性连接的受力性能。     

Potential use of phenolic antioxidants on peanut to control growth and aflatoxin B1 accumulation by Aspergillus flavus and Aspergillus parasiticus

Food‐grade antioxidants: butylated hydroxyanisole (BHA), propyl paraben (PP) and butylated hydroxytoluene (BHT) (10 and 20 mmol g^?1) and all the mixtures of these chemicals were tested for inhibitory activity on the growth of and aflatoxin B₁ (AFB₁) accumulation by Aspergillus parasiticus and A. flavus on irradiated (7 kGy) peanut grains. Also, the influence of these treatments was evaluated in different water conditions (0.982, 0.955, 0.937a_w) at 11 and 35 days of incubation at 28 °C. Water activity (a_w) affected the fungal growth, no fungal development was observed at the highest stress water condition (0.937a_w). Butylated hydroxyanisole at 10 mmol g^?1 level and all the mixtures with PP and/or BHT were significantly effective (P = 0.05) in increasing lag phase and reducing growth rate and colony forming units per gram of peanut of both Aspergillus section Flavi strains and AFB₁ accumulation. The application of BHA at concentrations of 20 mmol g^?1 alone or with PP and/or BHT totally inhibited fungal growth at 11 and 35 days of incubation. The results suggest that the addition of these chemical mixtures on peanut grains at low levels has potential to impact synergically on the control of Aspergillus section Flavi. Copyright © 2007 Society of Chemical Industry