特大型地下厂房岩壁梁锚杆和混凝土施工技术及质量控制

岩壁梁是一种新型结构，为通过一定深度的锚杆将钢筋混凝土梁固定在地下厂房两侧的岩壁上，而吊车荷载则通过锚杆和钢筋混凝土与岩石接触面的摩擦力传到岩体上，形成岩壁梁和岩体共同受力的结构。岩壁梁是地下厂房施工和运行的核心建筑物，岩壁梁锚杆和混凝土的施工质量是直接关系到岩壁梁成败的关键，所以施工技术和施工质量均要求极高，是地下厂房系统施工的重点和难点。本文介绍了瀑布沟水电站地下厂房岩壁梁锚杆和混凝土施工的关键技术及质量控制经验，可供同类工程借鉴参考。     

疏松砂岩地层出砂对套管损坏的研究

以东濮凹陷文明寨油田历年井况调查的套管损坏资料为依据，在对出砂油井套管损坏形态、层位与射孔状况、岩石性质等因素进行综合分析基础上，对疏松砂岩出砂、上覆岩层坍塌等主要方面导致的套管受力变形进行研究，为探讨防治措施提供依据。     

牙轮钻头的岩屑破碎机理及可钻性的分形法

为满足优质高速钻井的要求,需要对岩石可钻性做出快捷、精确的判断。利用分形几何理论,研究了钻井过程中牙轮钻头的破岩机理以及岩屑的等破碎概率问题;依据Bond裂纹学说,提出了一种以井底返出的岩屑为对象的岩石可钻性测试方法,并建立了岩石可钻性极值和岩屑分形维数的关系模型。室内实验表明:微钻头岩石可钻性级值与破碎岩屑分形维数存在明显的相关性,由此制定了一个基于岩屑粒度分布分形维数表示的岩石可钻性预测指标。经现场检验,分形法确定岩石可钻性级值具有较高的精度。这表明钻井过程中上返岩屑的分形维数能反映岩石可钻性程度,可以用分形维数衡量岩石可钻性大小。     

辽河油田欧52井火山岩油层三元酸压裂酸化工艺技术

辽河油田东部凹陷火山岩油藏较为集中分布．然而常规酸化效果较差．经采用三元酸（粉末硝酸、盐酸和氢氟酸）前置液压裂酸化后．获得显著的增产效果，进一步表明该项酸化工艺技术成熟，宜于推广应用。同时也面临技术集成再创新机遇．适应更广泛的地质需求。     

节理岩体的代表单元集合体模型及弹性参数预测

本文明确提出了节理岩体“代表单元集合体”的概念和模型，通过对节理岩体的“代表单元集合体”进行数值模拟，研究了节理岩体的“代表单元集合体”的变形特性，建立了节理岩体的弹性模型，提出了预测节理岩体宏观等效弹性参数的计算机模拟方法，并将其应用于岩体工程稳定性分析中。     

Electrorheological Fluids Based on Titania Particles Coated with Silica and Their Application in Smart Windows

The electrorheological (ER) fluids are colloidal suspension of highly polarizable particles in a non-conducting solvent.Chains of submicron-sized particles formed along an applied DC electric field by the so-called electrorheological effect.According to the obvious change of transmittance of the ER fluids in a DC electric field when the polarized particles arranged along the field,the model of smart window was proposed by sandwiching the ER fluids based on titania particles coated with silica between a pair of In-Sn oxide (ITO) coated glasses.The solar transmittance change as much as 48.0% was obtained with the wavelength of 500 nm at the maximum on applying and removing the electric field of 500V/mm.     

DH-2001综合地化录井仪的研制

地化录井仪是一种采用岩石热解法快速定量评价生油岩和储油岩的设备。文章介绍了DH - 2 0 0 1综合地化录井仪的组成和功能 ,阐述了仪器硬件和软件的设计思想。实际应用证明 ,该仪器的设计先进、实用     

二滩水电站地下厂房洞室的施工特点

国际承包商在二滩工程中的许多施工布置和方法，施工技术和工艺、施工设备和措施很具有特色，扩展了我们的视野、丰富的我们的思路。总结其经验，可作为国内类似工程的参考。     

Rich photoluminescence emission of SnO2–SiO2 composite aerogels prepared with a co-fed precursor sol–gel process

Tin oxide–silica composite aerogels were successfully prepared with a co-fed precursor sol–gel process. The crystallinity of the tin oxide nanoparticles, embedded in the mesoporous SiO₂ network, was improved with increasing the post-reaction thermal treatment temperature. The composite aerogels exhibited a rich photoluminescence (PL) emission contributed by both SnO₂ and SiO₂. The PL peak of 346 nm was from the near band edge emission of the tin oxide nanoparticles, and the ones located at 310 and 476 nm were attributable to the oxygen deficiencies of the silica network. Three more emission peaks, 387, 432, and 522 nm, were observed, with the 387 nm peak contributed by the oxygen vacancies V_O⁺⁺, the 432 nm peak by the Sn interstitials, and the 522 nm peak by the oxygen vacancies V_O⁺, respectively, of the tin oxide nanoparticles. The intensities of these three defect level emissions were found decreased, as compared to that of the near band edge emission, with increasing the post-reaction thermal treatment temperature as the tin oxide crystallinity improved.     

EFFECTS OF SUBMICROMETER PARTICULATE SILICA ADDENDA ON THE ADHESION OF MICROMETER-SIZE PARTICLES TO A POLYESTER-COMPOSITE SUBSTRATE

The force needed to detach five sets of different size particles, having number-averaged diameters between 3.6 and 8.5 µm, from a composite substrate was measured using an ultracentrifuge. In addition to size variations, the asperity concentration for each size particle was adjusted by varying the silica concentration, adjusted so that the surface area concentration at each level was kept constant for the five sizes of particles. Due to the changing silica concentration and particle size, the charge per particle also varied. It was found that the detachment force appeared to be virtually independent of charge, with any correlation actually appearing slightly negative, if anything. However, the detachment force increased monotonically with increasing particle diameter and decreased monotonically with increasing silica concentration. Moreover, upon normalizing the detachment force to the particle diameter and the silica concentration to the surface area concentration of silica, it was found that the detachment force clustered into groups in which the force needed to separate the particle from the substrate depended only on the silica concentration. These results suggest that van der Waals interaction, rather than electrostatic forces, are the dominant mechanism controlling toner adhesion in this instance.