液压系统高效冷却净化一体化技术研究

实验研究了管壳式热交换器壳侧流动和多孔介质强化传热技术 ,实验证实 ,壳侧采用螺旋板和多孔介质具有很好的强化传热效果 ,螺旋板的最佳角度为 40°,多孔介质的最佳孔隙率为 0 .985。同时研究了高梯度磁净化技术 ,探讨了冷却净化一体化的兼容性和互惠性。研制了一种管壳式冷却净化器 ,测试表明 ,管壳式冷却净化器对 10 μm以上的颗粒的过滤效率为84%,比一般磁过滤器效率高 2 .1倍 ;壳侧对流换热系数比现有冷却器高19.7%。     

220t/h高压蒸汽锅炉过热器的吊装技术

220t/h高温高压蒸汽锅炉过热器为大体积，大吨位，且锅炉工程与土建安装施工处于交叉作用状态，场地又狭窄，基于上述原因，提出了分部倒钩吊装方法，介绍了该方案的实施过程，对过热器的扳倒，倒钩，吊装的每道工序均进行了阐述，在不增加成本的前提下，安装，可靠，高效地完成吊装任务。     

High-Pressure (up to 140 MPa) Dynamic Viscosity of the Methane and Toluene System: Measurements and Comparative Study of Some Representative Models

The dynamic viscosity of toluene and methane mixtures containing 25.03, 37.19, 49.95, 64.11, and 95.00 mol% methane has been measured using a falling-body viscometer. The measurements (280 data points) have been performed in the temperature range 293.15 to 373.15 K and at pressures up to 140 MPa. The data have been discussed in the framework of recent representative models (hard-sphere scheme, friction theory, and free-volume model) as well as with simple mixing laws and empirical models (particularly the LBC model and the self-referencing model) used in the literature. This comparative study shows that the average absolute deviation of the models is between 4.9 and 26.8%, and the maximum deviation is between 11.6 and 49.5%.     

综合防渗技术在黄岗水库防渗加固工程中的应用

水库大坝综合防渗加固技术具有投资省、防渗墙体连接均匀完整可靠、防渗效果好、施工速度快等特点.通过黄岗水库的实践,为该项技术的推广提供了一个典型实例工程.     

Fast parallel Preconditioned Conjugate Gradient algorithms for robot manipulator dynamics simulation

In this paper fast parallel Preconditioned Conjugate Gradient (PCG) algorithms for robot manipulator forward dynamics, or dynamic simulation, problem are presented. By exploiting the inherent structure of the forward dynamics problem, suitable preconditioners are devised to accelerate the iterations. Also, based on the choice of preconditioners, a modified dynamic formulation is used to speedup both serial and parallel computation of each iteration. The implementation of the parallel algorithms on two interconnected processor arrays is discussed and their computation and communication complexities are analyzed. The simulation results for a Puma Arm are presented to illustrate the effectiveness of the proposed preconditioners. With a faster convergence due to preconditioning and a faster computation of iterations due to parallelization, the developed parallel PCG algorithms represent the fastest alternative for parallel computation of the problem withO(n) processors.     

汽油机爆震强度的分析

分析了汽油机缸内气体爆震燃烧压力的频率特性并推导了爆震压力共振频率计算公式。研究表明：在爆震工况下，缸内压力在高频域中有几个共振峰，峰的大小表明了汽油机爆震强度。汽油机的表面振动在这些共振频率峰处也出现相应振动峰。表面振动峰与缸力压内峰值近似成正比。汽油机表面振动峰值可作为爆震强度的评价指标，该结论在ＣＡ１１０２汽油机上得到了证实。     

A design and analysis of objective function-based unsupervised neural networks for fuzzy clustering

Fuzzy clustering has played an important role in solving many problems. In this paper, we design an unsupervised neural network model based on a fuzzy objective function, called OFUNN. The learning rule for the OFUNN model is a result of the formal derivation by the gradient descent method of a fuzzy objective function. The performance of the cluster analysis algorithm is often evaluated by counting the number of crisp clustering errors. However, the number of clustering errors alone is not a reliable and consistent measure for the performance of clustering, especially in the case of input data with fuzzy boundaries. We introduce two measures to evaluate the performance of the fuzzy clustering algorithm. The clustering results on three data sets, Iris data and two artificial data sets, are analyzed using the proposed measures. They show that OFUNN is very competitive in terms of speed and accuracy compared to the fuzzy c-means algorithm.     

高压条件下伴随化学反应两相流动的数值模拟

建立了高装填密度火药床在高压条件下的一维两相流体力学方程组，探讨了两相自由射流边界的处理方法，并对其进行了数值求解．揭示了对流燃烧过程的燃烧机理．数值结果与实验测得的压力曲线和火焰阵面曲线有较好的一致性     

一个低电阻率油气藏的测井评价

根据J油田大量岩芯分析资料,应用油藏流体分布理论和毛管压力计算方法,研究该油田低电阻率油气层的形成原因认为:地层水矿化度高(多数>20万ppm);微细孔隙发育,束缚水含量高;粘土矿物含量高且分布在碎屑颗粒表面等是形成低电阻率油气层的主要原因.一般常规测井评价时,对这种低电阻率油气层容易误释而丢弃.依据油气藏流体分布原理,应用毛管压力方法计算原始含油饱和度,可准确地识别出这种低电阻油气层,并可预测其产能.     

温度,压力对漂移室气体增益的影响

研究了温度及气体压力对漂移室（工作于正比区）气体放大倍数的影响，温度和气体压力的变化范围分别是５￣４０℃及９０￣１０５ｋＰａ。用实验数据拟合得到了函数关系并测量了几种饱和度下函数中的参数值。