Evaluation of different coating systems by electrochemical methods

Corrosion protection of organic coated steel is determined by free corrosion potential measurements and impedance spectroscopy. The results are classified by means of very basic considerations and evaluation figures are developed. These electrochemical data are correlated with the extent of the corrosion for each coating system. The evaluation figures are used for ranking coating systems and this ranking is correlated with the ranking with reference to the results of standardized and exposure tests.     

W—311^#耐腐蚀SMC树脂的开发研究

本文介绍了Ｗ－３１１＾＃ＳＭＣ不饱和聚酯树脂的研制及制品耐水、耐腐蚀性能。实际应用表明，该树脂适合ＳＭＣ成型工艺要求，为优良的耐腐蚀ＳＭＣ树脂。     

基于像素差异的金属腐蚀区域分割仿真研究

研究基于图像的金属腐蚀区域分割问题,提高分割区域的准确性。针对传统基于金属本身与腐蚀颜色的区别,利用像素差异的变化进行腐蚀区域的分割,因当腐蚀颜色与金属的本体颜色相差不是很大,或者在边沿发生像素的混淆时,利用差异边缘像素相减的方法很难完整分割腐蚀区域的问题。为了解决上述问题,提出利用空间像素差异距离聚类的金属腐蚀区域图像分割算法。通过计算差异像素之间的差异距离概率,将差异像素特征进行严格划分,对划分后的结果进行排序计算,详细描述混淆边沿信息,对腐蚀区域进行完整分割。实验证明,改进方法能够对金属腐蚀造成的细微区域完整分割,取得了满意的效果,为金属腐蚀区检测提供了参考。     

Effect of atmospheric pollutants on the corrosion of high power electrical conductors: Part 1. Aluminium and AA6201 alloy

The aim of this study was to evaluate the joint effect of marine and industrial pollutants on the atmospheric corrosion of aluminium and its AA6201 alloy. Weight loss was determined after 4, 11, 16 and 24 months exposure being morphology and attack intensity analysed through SEM-EDX. Both materials showed the most intense attack for the highest SO₂ contents. Good correlation among weight loss, attack depth and tensile strength to rupture with time and with pollutant contents was determined for both materials in most sites. The cause for low aggressiveness of the heaviest Cl⁻ polluted atmosphere on aluminium was electrochemically demonstrated.     

岛上原油贮罐罐底边缘板腐蚀机理分析及防护措施

对马鞭洲岛广石化码头原油罐罐底边缘板腐蚀机理进行分析，并采取相应的防护措施。实践表明，对提高码头原油贮罐的安全使用寿命是有效的。     

Inhibition behavior for copper corrosion by photoelectrochemical methods

wavelengthofmono chromatelightwas 4 2 0nm .3　RESULTSANDDISCUSSION3.1　ApplicationofphotoelectrochemicalmethodtoevaluatetheeffectsofinhibitorsforcoppercorrosionThestructuresoftheinhibitorsforcoppercorro sionshownintextareasfollows:Theinhibitioneffectsofdifferentinhibitorsforcoppercorrosioncanbeevaluatedby photoelec trochemicalmethod .AsshowninRef .[12 ],onanegativepotentialscan ,thepotentialcorrespondingtothecathodicphotocurrentJph=0isdefinedasΦV,atwhichCu2 Oontheelectrodesurfaceisc…     

新型铸造镁合金开发现状

总结了近年来镁合金在高温抗蠕变、高韧性、高强度、高耐蚀性、降低成本和改善工艺性六大热点研究方向上取得的典型研究成果，重点阐述了对高温抗蠕变铸造镁合金的研究。并从热力学角度分析了镁合金中可能出现的各相对镁合金高温蠕变过程的影响，叙述了Mg-Al、Mg-Zn和Mg-RE系耐热合金的最新发明。     

连铸机扇形段框架和立柱腐蚀失效分析

对连铸机扇形段和框架腐蚀发生的原因进行了分析. 结果表明，在生产现场的特殊环境条件下，腐蚀是各种因素综合作用下缝隙腐蚀加速发展的 结果，冷却水中Cl离子浓度过高是腐蚀加速发展的重要原因, 改善表面保护涂层质量是防治 腐蚀的关键.     

Taxonomy for protective ability of rust layer using its composition formed on weathering steel bridge

For a quantitative evaluation of the protectiveness of a rust layer formed on a weathering steel bridge, the relationship between the corrosion rate of the bridge and the composition of the rust layers formed on the girders was first investigated. These corrosion rates were clearly classified by the protective ability index (PAI) of α/γ^∗ and (β + s)/γ^∗, where α, γ^∗, β and s are the mass ratio of crystalline α-FeOOH, the total of γ-FeOOH, β-FeOOH and the spinel-type iron oxide (mainly Fe₃O₄), β-FeOOH and spinel-type iron oxide, analyzed by XRD, respectively. The inequality of the former index α/γ^∗ > 1 expressed the protectiveness criterion of the rust layer, while that of the latter index, (β + s)/γ^∗< 0.5 or > 0.5, classified the corrosion rate of the non-protective rust layer. The PAI is useful for a quantitative evaluation of the protectiveness of a rust layer formed on a weathering steel bridge and is an important item for the corrosion assessment of the bridge.     

离子氮化对镀铬层组织与性能的影响

研究了镀铬层经离子氮化后的组织和性能。分别用SEM、电子探针和X光衍射仪观察和分析了复合处理层剖面的组织、结构和成分,试验结果表明:离子氮化能使镀铬层的网状裂纹弥合,可明显提高了镀层表面硬度、结合力和耐蚀性。