A computational model for analysing interactive buckling and delamination growth in composite structures

In this paper, a unified method is presented: (i) to model delaminated stiffened laminated composite shells; (ii) for synthesising accurate multiple post-buckling solution paths under compressive loading; and (iii) for predicting delamination growth. A multi-domain modelling technique is used for modelling the delaminated stiffened shell structures. Error-free geometrically nonlinear element formulations — a 2-noded curved stiffener element (BEAM2) and a 3-noded shell element (SHELL3) — are used for the finite element analysis. An accurate and simple automated solution strategy based on Newton type iterations is used for predicting the general geometrically nonlinear and postbuckling behaviour of structures. A simple method derived from the 3-dimensionalJ-integral is used for computing the pointwise energy release rate at the delamination front in the plate/shell models. Finally, the influence of post-buckling structural behaviour and the delamination growth on each other has been demonstrated.     

提高铌钽标准液显色反应能力并延长其有效贮存期的分光光度法研究

铌，钽的酒石酸，柠檬酸，草酸铵标准液的显色反应能力及有效贮存期，同铌，钽的原始标准溶液ｐＨ有很大关系，铌酒石酸标准液（原始溶液ｐＨ１．４），其显色反应能力仅在８０％～５０％之间（视放置时间长短而异），但如何采用ｐＨ４．５～５．０的铌酒石酸标准液，其显色反应能力达１００％，即使贮存４４０ｄ后，仍能保持原有的显色反应能力，铌柠檬酸标准液（原始溶液ｐＨ１．２），无论用本法（Ｎｂ－ＢＰＲ－ＣＰＢ法）还是用     

热钾碱法脱碳的缓蚀及钒化工艺技术改进的试验研究

介绍了热钾碱法脱碳钒化工艺技术改进的试验过程，开发了原始开车钒化，在一定条件下取消钒含量控制，实现了运行中不加钒、中修后开车不钒化的新工艺技术。本技术已通过化工部鉴定，处于国内领先水平，并具有可观的经济效益。     

超高压输电线路分裂导线通道模式理论分析

本对分裂导线传输电磁波的模式理论进行了分析，从所解特征根中选择一组最简单的模分量传递信息，并阐述了传输规律。     

圆筒混合机振动和粘漏料问题及解决办法

对圆筒混合机长期未得彻底解决的振动、大型零部件寿命短、筒体内壁粘料、进料漏斗堵料与漏料等问题进行了原因分析；根据宝钢烧结分厂的实践经验提出了解决办法。     

光度法测定金属表面处理溶液中的磷

采用光度法直接测定金属磷酸盐处理溶液中的磷，磷量在0～50ug／50mL内符合比耳定律。此法特点快速、简便、显色稳定性好、选择性强，回收率为98．00％～102．00％。     

多目标二次规划非劣解集的理论生成及应用

本文对多目标二次规划问题非劣解集的理论生成进行了探讨,在介绍二次规划单目标问题优化解求法的基础上,提出了在决策平面上互切点,共交点轨迹的概念.由此导出了非劣解集的一般解析式(对切点解问题)和另一类交点解问题时的非劣解集求法,然后介绍了在目标平面非劣解集的解析表达式.使多目标二次规划问题整个非劣解集的推求严格、明确和方便,有理论和实际意义。文中以一个综合利用水库参数的多目标优选作为例子阐述了应用,并求出了最终的最佳协调解.     

对HIC试验中两种不同腐蚀介质酸碱度的探讨

HIC是腐蚀试验中常用的检测方法,用来测评材料在含硫化氢环境中对氢离子敏感性大小.其包含两种不同的腐蚀介质,不同的腐蚀介质中酸碱度是不一样的,腐蚀介质的酸碱度对试验结果有较大的影响,为此,运用电离平衡理论,计算并分析两种不同腐蚀介质电离平衡前后的氢离子浓度变化,得出动态反应平衡时氢离子浓度的关系式,从而获得介质中精确的氢离子浓度,并对腐蚀介质中相关离子进行了探讨,为进一步探究相关环境中的腐蚀机理提供了依据.     

聚合物驱流线数值试井解释模型及其应用

针对生产和关井两个阶段分别建立了考虑复杂因素影响的聚合物驱流线数值试井解释模型，两个阶段均考虑了油藏非均质性、聚合物驱、油水两相流、多井等因素的影响。该流线试井解释模型采用最新的流线方法进行一维求解，具有更高的求解速度和稳定性，同时它比现有模型更加接近于油藏真实环境，具有更高的现场实用性。     

Paste Residence Time in a Spouted Bed Dryer. II: Effect of Spout Operational Conditions

Residence time distributions for an aqueous solution of 10% sodium chloride in a spouted bed dryer of inert particles were determined using the stimulus-response technique. Glass and polyethylene beads with diameters 2.6 and 3.4 mm were used as inert bodies in a cylindrical column of 14.0 cm diameter and 60° conical base. The effects of inert bodies load, air, and paste flow rates on the mean residence times and RTD were determined following 2³ factorial designs. The RTD could be correlated to the perfect mixing cell model with R² varying from 0.8684 to 0.9815. The mean residence times in CSBD varied from 10.8 to 13.9 and 10.7 to 13.3 min for glass and polyethylene beads, respectively. For both inert particles, mean residence times increased with bed height and decreased with paste feed rates. Also, terms of interaction among the factors were significant in some cases, showing a complex behavior of paste residence times. Equations obtained by response surface regression could predict mean residence times on glass and polyethylene beads with deviations lower than ±10%.