Assessing pre- and post-deformation in the southern Arava Valley segment of the Dead Sea Transform, Israel by differential interferometry

Differential radar interferometry, using archived ERS data over the region of the Dead Sea Transform, allows to detect ground movement (subsidence or uplift) in playas within the southern Arava Valley segment of the Dead Sea Rift. These measurements are consistent with a mean displacement rate of about 0.4 cm/month, in the direction of the radar beam, during the 8-month period preceding the Nuweiba earthquake of 22 November 1995. In the 3 years following the earthquake, the measured rate was smaller by a factor of 10. These movements are not related to salt diapirs or water pumping activities in the area. The exact location, along faults, suggests a possible correlation with pre-seismic and post-seismic fault deformation.A simple fault model consistent with the observed phenomena associates the observed subsidence/uplift to right and left stepping en-echelon fault patterns related to inter-seismic tensional accumulation along the faults. Further observations are necessary on this site and similar fault areas to corroborate the correlation between seismic activity and the observed phenomena. Monitoring of these sites should continue with differential Global positioning system (GPS) measurements and radar interferometric analysis using Envisat and Radarsat as well as archived data (including J-ERS).     

二维轴对称折迭－组合腔CO2激光器失调时的输出光束的近场分析

给出平凹谐振腔和凹平凹谐振腔失调时光轴确定方法。在二维轴对称折迭－组合腔 激光器小角度失调运行时，对非相干并和和相干并和后的输出光束的近场强度分布做了分析和模拟。结果表明：小角度失调对4cm以内的近场影响不大，光强分布仍具有高斯状分布；对4cm以外的近场影响较大，光强分布发生相应的形变，且随着失调角度变大而变大。     

在3．39μm波段甲烷吸收特性的测量与应用研究

报道了甲烷气体在３．３９μｍ波段吸收特性的研究结果，及其在３．３９μｍ波段多波长干涉测量中的应用。通过改变甲烷吸收室的充气参数，使激光器工作在双等光强工作点，并完成了绝对距离的干涉测量。     

动载荷下应力强度因子的边界元计算

用Ｎａｒｄｉｎｉ－Ｂｒｅｂｂｉａ边界元法计算了动载荷下的应力强度因子，与解析解及有限元解相比较，效果较好。最后对计算结果进行了分析讨论。     

Stress concentration and fatigue of profiled reinforcing steels

Stress concentrations arise from profiles of ribbed reinforcing steel bars and in this study the results of calculated stress concentration factors (SCF), by using finite element method, are related to the fatigue test results. It is apparent that the degree of confinement of a ribbed bar embedded in concrete not only affects the magnitude of the ultimate bond stress but also the bond stress-slip relation. Thus the rib geometry or profile pattern is designed for optimum bond characteristics and not for fatigue considerations. However the rib geometry influences the fatigue performance through the SCFs arising from the root radius, width and flank angles of the profiles. It is shown that these latter factors have a significant influence on the fatigue behaviour of reinforcing steel bars.     

锡膏激光扫描三维测量系统光强自适应调节技术

根据锡膏激光扫描三维测量系统在测量PCB电路板时底板和锡膏对激光光强的散射效果不同,设计并研制了一套光强自适应调节光源。该光源以程控电源为基础,分析光条中心提取效果与激光光强的关系,应用小波分解与频带能量比相结合的光强自适应调节算法实现测量系统光强自适应调节功能。进行了相关实验,实验结果表明该光源能够很好地实现锡膏激光扫描三维测量系统的激光光强自适应调节,并能选出最适合测量的激光光强,具有很好的适用性。     

NANO-MULTILAYERS WITH HIGH PERPENDICULAR ANISOTROPY FOR MAGNETIC RECORDING

(FePt/Ag)n nano-multilayers were deposited on MgO (100) single crystal with laser ablation and then subjected to annealing. FePt L1o grains with (001) texture and thus a large perpendicular magnetic anisotropy constant Ku of the order of 106 J/m3 were formed. A thick Ag layer is found to be favorable for decreasing the dispersion of the easy axis for magnetization. The measurement of time decay of magnetization gave rise to a small activation volume of the order of 10-25m3, showing the promising of being the recording medium for future high density perpendicular recording.     

Microstructures and Plastic Anisotropy of As—Cast Low Carbon Steel Strips

对比研究了低碳钢带铸材不同处理状态钢带和薄板铸坯中不同位置切片的组织特征、晶体学织构和15％工程应变条件下的塑性异向性．结果表明，带铸材试样中存在{111}与{114}特征织构，织构强度均较弱；铸坯切片中存在{111}与{001}特征织构，并且因局部凝固冷速不同存在明显的织构强度差异．两组低碳钢的法向异向性与平均晶粒尺寸的对数之间尽管均存在线性关系，但斜率明显不同．分析表明法向异向性的晶粒尺寸依存性与钢带中织构的强弱有关，由此提出了“有效织构强度比”的概念，从塑性变形理论的角度解释了微观组织对塑性异向性的影响．