空气压缩机无油润滑在山脚树矿的应用

山脚树矿有5台1966年上海生产的4L—20/8空气压缩机,运行很不经济,利用聚四氟乙烯合成材料制成活塞环,全部实现无油润滑运转,取得了良好的经济效益。     

收尽铁路油槽车底油的措施

介绍了造成铁路油槽车底油收不尽的原因，一是节约意识差；二是设备设施陈旧或维护不够；三是操作不当。提出了增强节约意识，挖掘设备潜力，采用合理的吸油方法的对策。     

金属表面柴油机油沉积物的反射红外光谱法研究

利用镜反射红外光谱法研究了ＣＣ级柴油机油中添加剂对成漆板板面漆膜组成的影响：考察了成漆板漆膜组成与Ｃａｔ．１Ｈ２活塞环台漆膜组成的相关性。试验结果对柴油机油的研制和应用有一定指导作用。     

Surface tension as a limiting factor for aerobic n-alkane biodegradation

A new mathematical model for n-alkane biodegradation in crude oil, heavy oil and paraffinic mixtures is described. The pattern of n-alkane degradation as a function of the inverse of hydrocarbon chain length reported in this paper can be considered as general behaviour for many aerobic n-alkane biodegradation processes. A new interpretation of n-alkane biodegradation as a function of surface tension, is given. A mathematical expression was obtained starting from the degradation values of n-alkane and relative surface tension, which is a parameter independent of fermentation conditions. An interesting parameter, b, was identified which represented the accelerating conversion factor for n-alkane biodegradation. The findings suggested that the n-alkane biodegradation. The findings suggested that he n-alkane biodegradation rate may be affected by the fermentation condition (agitation, aeration, etc.) and by the strain of microorganism, while the behaviour pattern of n-alkane degradation was essentially linked to the substrate characteristics (molecular structure, molecular weight and density).     

Determination of heavy metals and volatile aromatic compounds in used engine oils and sludges

Assessment of contaminant releases during utilization of used oils is essential for the determination of environmental acceptability. These paper reports the results of the study examining a toxic metal leachability from used engine oil and sludge samples employing leaching test (TCLP). The leaching test indicated that lead in oil samples exceeded 5-ppm concentration level what qualified them as a toxic waste. The samples of contaminated sludge were found to contain high concentration of total lead, barium and chromium, but the leaching test showed concentration below regulatory limit. The total content of benzene, ethylbenzene, toluene, and xylenes (BETX), and naphthalene in used oil and sludge samples was also determined and was found not to be a significant factor to contamination.     

Correlation of reactivity with chemical structure: Thermal hydrogenation of gas oils

The relationship between chemical structure and reactivity for thermal hydroprocessing was studied for five gas oils derived from Alberta bitumens. Chemical structure was characterized by combining data from ¹ H and ¹³ C nuclear magnetic resonance spectroscopy, class fractionation, and elemental analysis to calculate structural parameters. Thermal hydrotreating was performed in a continuous-flow stirred reactor at 420 and 440°C, 13.9 MPa hydrogen pressure, and 1.5 h¹ LHSV. Conversion of the 343–525°C boiling fraction of the gas oils was correlated with the concentration of naphthenic methylene groups in the feed. Formation of methane and ethane was dependent on the degree of condensation of the aromatic rings in the feed oils. Thermal desulfurization was highly correlated with the amount of saturates in the feed, and the aromaticity of the resin fraction. Hydrogen consumption increased with the aromaticity of the gas oil…     

软土地基油罐底板变形分析

分析了造成油罐底板变形的原因、形式及其危害，结合工程实例，提出了减少油罐底板不均匀变形的措施。     

Effect of mixing leaves with olives on organoleptic quality of oil obtained by centrifugation

Variable quantities of leaves were added to ripe olives prior to extraction to determine their effect on the quality of the resulting olive oil. The addition of 1–3% w/w leaves improved the organoleptic quality. An increase intrans-2-hexenal aldehyde content occurred, giving the pleasant flavor of “freshly cut grass.” This compound was produced by the enzymatic breakdown of 13-L-hydroperoxide of linolenic acid in leaf homogenates.     

Effect of oil degradation during frying on the color of fried, battered squid rings

Oil degradation caused by the number of fryings performed and the effect of oil degradation on the color of fried battered squid rings were studied. Spectrophotometric techniques with absorbance in the UV and visible ranges, and iodine, peroxide, and acid values were used to determine oil degradation. Determination of various CIELAB parameters in order to study the external color of the fried battered squid rings revealed no differences in color due to the number of fryings. A study of the color of the battered squid rings at various frying times and temperatures showed significant differences for both variables. Although there was some degradation in the oil after 20 fryings, appearing as a slight darkening, it did not affect the final color of the fried, battered squid rings.     

Heavy metals contribution of non-aqueous fluids used in offshore oil drilling

A monitoring program was performed to investigate heavy metal content alteration due to exploratory drilling for oil using non-aqueous fluids (NAFs) in Brazilian offshore, 900 m deep. Fourteen elements were monitored in 54 sites and it was verified that after drilling activities the average Ba concentration was remarkably increased with respect to background level, even 1 year after the activity. A minor increase in Mn and a moderate increase in Al concentrations were verified. The Cd, Cr, Ni, As, Co, Cu, Pb, V, and Zn concentrations were at the background levels, ca. 1 year after the NAFs drilling materials deposition on the seafloor. The Al, Ba, Cd, Cr, Cu, Ni and Zn mean concentrations were significantly different (P<0.05) between the three sampling operations (cruises) performed, while As, Cd, Fe and Pb presented different mean values according to the distance of the oil well, independent of the sampling operation. Interaction between sampling operation and distance was observed for Mn. In all sediment samples the Hg concentration was below the detection limit (0.07 μg g⁻¹).