Application of the CONCAWE biodegradability test for oil products

Information on the biodegradability of an oil product (or its components) is needed for classification and labelling purposes. The extent to which a product can be broken down by microbial attack is usually determined using a ‘ready biodegradability’ test (e.g., OECD 301 Test Guidelines). However, these methods are stringent screening tests and can often underestimate the extent to which a product can be removed from the natural environment by biodegradation. CONCAWE (the European oil companies’ organisation for environment, health and safety) has recently developed a test for determining the potential (or ‘inherent') biodegradability of oil products. This is often more useful for assessing the likely impact of an oil product in the event of its release into the environment. This paper gives examples of CONCAWE test results for a number of base fluids and formulated products, and compares these results with those obtained in a ‘ready biodegradability’ test. Guidance is given on the applicability of data that has been obtained using the CONCAWE method.     

Recent trends in environmentally friendly lubricants

Many of the lubricants used in the world today cause environmental pollution through total‐loss applications, spillage, evaporation, and in other ways. To reduce this environmental damage, new lubricants that are rapidly biodegradable and ecologically non‐toxic have started to be developed and marketed. This paper discusses the introduction of environmentally friendly lubricants and their constituents, with particular emphasis on their environmental benefits, applications, the limits to their use, their technical performance characteristics, and relative cost aspects; many of these lubricants are based on vegetable oils and esters. Comparisons are also made in the paper with conventional mineral‐oil based materials.     

Advances in US Air Force hydraulic fluids

The US Air Force Wright Laboratory's Materials Directorate has been involved with the development and transition of advanced fluids and lubricants since the 1950s. The driving force for the development of new hydraulic fluids has primarily been and still is, improved fire resistance, although biodegradability and low toxicity have become increasingly important. This paper briefly traces the use of military aircraft hydraulic fluids from the beginning to the current state-of-the-art.     

Biodegradability of lubricant base stocks and fully formulated products

Increasing awareness of the environmental impact of consumer and industrial products has produced a demand for lubricants that biodegrade. There is a number of biodegradation tests that can be used on lubricants, although not all are always appropriate, as this paper explains. The CEC test is among the best known and is in use for both conventional and synthetic oils. There will, in future, be a greater movement to biodegradable oils in Europe, perhaps extending to all oils.     

Environmentally considerate ester lubricants for the automotive and engineering industries

Concern at the amount of lubricants lost in the environment has prompted the search for environmentally considerate lubricants, i.e. lubricants which biodegrade as a result of the biological action of living organisms. Various test procedures and parameters are discussed, and the performance of various lubricants, including synthetics, is presented.     

Water resistance,mechanical properties,and biodegradability of poly(3‐hydroxybutyrate)/starch composites

Composites of poly(3‐hydroxybutyrate), P(3HB), and starch were prepared by solution casting technique. To improve adhesion of starch to P(3HB), stearic acid was added as a compatibilizer and glycerol as a plasticizer. The water resistance, mechanical, and biodegradable properties of the P(3HB)/starch composites were studied. Diffusion and penetration coefficients of water increased with increasing starch content in the composites. The results showed that the elastic modulus and strain at rupture of the P(3HB)/starch composites were enhanced by increasing starch content upto 10 wt % and the tensile strength increased from 21.2 to 93.9 MPa. The presence of starch content higher than 10 wt % had an adverse effect on the mechanical properties of the investigated composites. The biodegradation rate using Actinomycetes increased proportionally to the starch content in the composite and accelerated in a culture medium of pH ≈ 7.0 at 30°C. Enzymatic degradation experiments showed that lipase produced by Streptomyces albidoflavus didnot degrade P(3HB)/starch composites. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Ultrasonic pre‐treatment of biological sludge: consequences for disintegration,anaerobic biodegradability,and filterability

BACKGROUND: Disintegration was developed as a pretreatment process for sludge to accelerate the digestion processes. Ultrasonic treatment may be a good alternative for sludge disintegration. In this study, different specific energy inputs ranged between 0 and 15 880 kJ kg^?1 and very low ultrasonic densities ranged between 0.04 and 0.1 W mL^?1 were applied to biological sludge for disintegration purposes. The potential for improving anaerobic digestion through ultrasonic pre‐treatment and the effect of ultrasonic pre‐treatment on the filterability characteristics of sludge were also investigated. RESULTS: 9690 kJ kg^?1 TS of supplied energy and very low power density of 0.09 Wm L^?1 are efficient for floc disintegration. For 9690 kJ kg^?1 TS, 44% higher methane production was achieved than with raw sludge as a result of biochemical methane potential assay. The supernatant characteristics of the sludge were also affected by the ultrasonic pre‐treatment. For 9690 kJ kg^?1 TS, the soluble chemical oxygen demand (SCOD), dissolved organic carbon (DOC), total nitrogen (TN), and total phosphorus (TP) in the sludge supernatant increased by 340%, 860%, 716%, and 207.5%, respectively. CONCLUSION: Ultrasonic pre‐treatment is an effective method for biological sludge disintegration even at very low ultrasonic density levels. It leads to increased anaerobic biodegradability but deteriorates the filterability characteristics of biological sludge. Copyright © 2009 Society of Chemical Industry     

The influence of volume fraction of amorphous phase on corrosion resistance of Mg67Zn 29Ca 4 alloy

The aim of this study was to investigate the structure and corrosion resistance of amorphous, amorphous‐crystalline, and crystalline Mg₆₇Zn₂₉Ca₄ alloy for biodegradable applications. This paper presents a preparation method and results of the structural characterization and corrosion resistance analysis of the material. Samples were prepared in the form of 3 mm diameter rods. The structure of the alloy was examined with the use of X‐ray diffractometry and scanning electron microscopy. The thermal properties of the samples were examined with differential scanning calorimetry (DSC). Results of DSC analysis were used to determine heat treatment temperatures, allowing to obtain different fractures of crystalline phase in the material. Corrosion resistance of heat‐treated samples was investigated by immersion tests and electrochemical measurements performed in the simulated body fluid. The X‐ray diffraction results confirmed that the prepared Mg₆₇Zn₂₉Ca₄ alloy's structure is fully amorphous. After heat treatment, samples with different fractions of amorphous phase in the structure were obtained. Immersion tests of the samples showed that the structure significantly influenced corrosion resistance in examined materials. It should be pointed out, that certain amounts of crystalline phase in amorphous matrix can greatly improve the corrosion resistance of Mg₆₇Zn₂₉Ca₄ alloy.     

Synthetic adipic complex tetraesters as eco‐friendly lubricants

The paper presents results concerning the synthesis and characterisation as lubricants with biodegradability potential of some complex tetraesters realised on the basis of adipic acid and different glycols such as (mono) ethylene, 1,3‐propylene, 1,4‐butylene, 1,5‐pentamethylene, 1,6‐hexamethylene, diethylene and triethylene glycol, respectively, along with oleic acid used, considered as an end, final segment or as a capping element. On the basis of a regular alternation or successive distribution principle of the polar and nonpolar chemical functions equally distributed, shared out on the length of a sufficient, satisfactorily long, large molecule, valuable synthetic complex tetraester lubricants considered as eco‐friendly base oils with biodegradability potential were performed. These products showed very good tribological properties, such as high viscosity indices and high flash points, and also very good lubricity features. Copyright © 2013 John Wiley & Sons, Ltd.