Shaping stable periodic motions of inertia wheel pendulum: theory and experiment

We consider an underactuated two‐link robot called the inertia wheel pendulum. The system consists of a free planar rotational pendulum and a symmetric disk attached to its end, which is directly controlled by a DC‐motor. The goal is to create stable oscillations of the pendulum, which is not directly actuated. We exploit a recently proposed feedback‐control design strategy based on motion planning via virtual holonomic constraints. This strategy is shown to be useful for design of regulators for achieving orbitally exponentially stable oscillatory motions. The main contribution is a step‐by‐step procedure on how to achieve oscillations with pre‐specified amplitude from a given range and an arbitrary independently chosen period. The theoretical results are verified via experiments with a real hardware setup. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Delay‐dependent robust stability and stabilization for uncertain discrete singular systems with delays

The robust stability and robust stabilization for time‐delay discrete singular systems with parameter uncertainties is discussed. A delay‐dependent linear matrix inequality (LMI) condition for the time‐delay discrete systems to be nonsingular and stable is given. Based on this condition and the restricted system equivalent transformation, the delay‐dependent LMI condition is proposed for the time‐delay discrete singular systems to be admissible. With this condition, the problems of robust stability and robust stabilization are solved, and the delay‐dependent LMI conditions are obtained. Numerical examples illustrate the effectiveness of the method given in the paper. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Simultaneous stabilization for a collection of nonlinear control systems in canonical form

A controller design method is provided to simultaneously stabilize a collection of nonlinear control systems in canonical form. It is shown that, under a mild assumption, any collection of nonlinear systems in canonical form can be simultaneously stabilized by one continuous state feedback controller. A constructive universal formula is presented explicitly. An illustrative example is given to demonstrate the validity of the method. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Weak and strong stabilization of linear systems

We study the problem of stabilizing a distributed linear system on a subregion of its geometrical domain. We are concerned with two methods： the first approach enables us to characterize a stabilizing control via the steady state Riccati equation, and the second one is based on decomposing the state space into two suitable subspaces and studying the projections of the initial system onto such subspaces. The obtained results are performed through various examples.     

航行状态下减摇水舱减摇能力仿真研究

本文根据“船舶-水舱”系统的运动模型,研究被动式减摇水舱在航行状态下的减摇能力。分别在不同海况、航速以及航向等条件下进行仿真,总结出水舱在不同航行状态下的减摇规律。并分析了可控被动式水舱的控制机理,为研究水舱的控制策略奠定了基础。     

Event-triggered control for stochastic systems with multiple delays

This paper investigates the stabilization problem for continuous-time stochastic systems with multiple delays under continuous event-triggered mechanisms, of which both static case and dynamic case are considered individually. In order to avoid zeno phenomenon in every sample path, a suspension time after each successful execution is forced for our event-triggered mechanisms, resulting in intermittent detection of system states. Under such control strategy, we deduce mean square exponential stability of stochastic systems with multiple delays by means of Hanalay-type inequality and obtain a delay-dependent-based and less-conservative stabilization criterion without involving the upper bound of time delays. Besides, a co-design procedure is proposed for linear controller and event-triggered mechanisms. In the end, an illustrative example is presented to show effectiveness of the proposed co-design procedure and contrasts the system performance under static and dynamic event-triggered mechanisms.     

A novel radial orientation treatment of nematic liquid crystals using magnetic field lines with permanent magnet and applying the assisted electric field

Recently, there has been considerable research on optical devices, such as liquid crystal (LC) lenses and special optical plates, using LCs. In such devices, relatively small LC cells are frequently used, or unique LC orientations are required. As an LC orientation process, we focused on the LC director's orientation induced by the magnetic force line distribution of a small neodymium magnet. We propose a simple method for obtaining radial orientation, which is rather difficult to obtain using the ordinary rubbing method. The initial orientation in the LC cell is a vertical orientation cell with almost zero azimuth anchoring. With the proposed method, the reorientation process is performed with an assisting electric field and a small permanent magnet, unlike the conventional magnetic field orientation process that requires a large electromagnet. Furthermore, a polymer stabilization treatment is used to fix the obtained radial orientation pattern in the LC cell. After the treatment, the applying voltage can control the tilt angle of the director in weak polymer treatment, and a completely fixed orientation pattern can be obtained that in strong.     

Stability analysis for linear time-varying systems using bicoprime factorization

This paper presents a bicoprime factorization (BCF) approach to deal with various stability problems for linear discrete time-varying (LTV) systems within the framework of nest algebra. Based on the bicoprime factorization, we give necessary and sufficient conditions for (strongly) simultaneous stabilization of three systems, which generalize similar results for systems by coprime factorization (CF). Finally, when the bicoprime factorization for the plant and controller has additive perturbations, we derive sufficient conditions using the norm inequality for robust stability of the system.     

Quasi-min-max MPC for visual servoing stabilization of omnidirectional wheeled mobile robots

This paper proposes a new visual servoing quasi-min-max MPC algorithm for stabilization control of an omnidirectional wheeled mobile robot subject to physical and visual constraints. The visual servoing dynamics of the robot are modeled as the state-dependent linear error system with nonlinear control inputs of rotation and deflection velocities of wheels. The state-dependent linear error system is covered as linear parameters-varying models which is used to design the visual servoing quasi-min-max MPC controller. The actual control inputs of the robot are then computed by the solution of an inverse algebraic equation of the MPC actions. The recursive feasibility and stability of the new visual servoing MPC are ensured by some LMIs conditions. The performance and practicability of the visual servoing MPC are verified by some simulation and experiment results.