Restraining the associations of anthracene fluorophore by chemically linking to poly(methyl methacrylate)

Associations (dimer or aggregate) of anthracene (An) fluorophores tend to interrupt the monomer emission and reduce the quantum yield (Φ_PL); therefore, poly(methyl methacrylate) (PMMA) chain was used in this study to chemically link to anthracene and to block the mutual associations among the anthracene fluorophores. With this aim, the target polymers were prepared by anionic polymerizations with 9,10‐dibromoanthracene/s‐butyllithium as initiating system to proceed polymerizations of methyl methacrylate (MMA) directly or in the presence of 1,1‐diphenylethylene (DPE). Use of DPE before addition of MMA produces stable initiating anionic species and avoids potential side reactions during polymerization; however, it also introduces four β‐phenylene rings around the central anthracene ring, which interfere with the corresponding emission pattern and reduce the Φ_PL (32%) value due to potential interactions between phenylene rings and anthracene. On the contrast, polymerization without participation of DPE results in polymer with central anthracene ring directly connected to two PMMA chains, which gives clean vibronic emission pattern with limited association emissions and enhanced Φ_PL (52%) value. Physical blending of anthracene by PMMA is less efficient to restrain the associations and results in a film of lower Φ_PL (20%). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of branched polyacrylonitrile through self‐condensing vinyl copolymerization

Branched polyacrylonitrile (PAN) was prepared through a self‐condensing vinyl copolymerization of acrylonitrile and 2‐(2‐bromopropionyloxy)ethyl acrylate (BPEA). The branched architecture of the product was confirmed by NMR spectra and the average degree of branching (DB ) was estimated. Through a comparison of the intrinsic viscosity of the product with that of its linear analogue, the contraction factor g′ was calculated. It was found that the viscosity of the branched PAN was obviously lower that that of linear PAN. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effects of three crosslinkers on colored pH‐responsive core–shell latexes

Environmentally responsive hydrogels have become attractive research subjects for many applications. In this work, a series of pH‐sensitive and color‐changing nanoparticles (nanogels) with core–shell structures were synthesized. The cores were blue latex particles synthesized by a miniemulsion technique with styrene and methacrylic acid as monomers and Neozapon Blue 807 as a dye. The shell was a pH‐sensitive polymer that was precipitation‐polymerized onto the core from 2‐(diethylamino) ethyl methacrylate with N,N′‐methylenebisacrylamide, poly(propylene glycol) diacrylate, and divinylbenzene as crosslinking agents. In the resultant latexes, the color was observed to change from deep blue to pale blue as the pH of the system was changed from a high of 10 to a low of 3. The synthesized latexes and particles (gels) were then characterized with an ultraviolet–visible spectrometer, dynamic light scattering, Fourier transform infrared, and nuclear magnetic resonance. Atomic force microscopy was also used to investigate the different morphologies of the particles after the synthesized latexes were dried at different pH values. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of poly(methyl methacrylate)/silica nanocomposite through emulsion polymerization using dimethylaminoethyl methacrylate

Polymer/Silica nanocomposite latex particles were prepared by emulsion polymerization of methyl methacrylate (MMA) with dimethylaminoethyl methacrylate (DM). The reaction was performed using a nonionic surfactant and in the presence of silica nanoparticles as the seed. The polymer‐coated silica nanoparticles with polymer content and number average particle sizes ranged from 32 to 93 wt % and 114–310 nm, respectively, were obtained depending on reaction conditions. Influences of some synthetic conditions such as MMA, DM, surfactant concentration, and the nature of initiator on the coating of the silica nanoparticles were studied. Electrostatic attraction between anionic surface of silica beads and cationic amino groups of DM is the main driving force for the formation of the nanocomposites. It was demonstrated that the ratio of DM/MMA is important factor in stability of the system. The particle size, polymer content, efficiency of the coating reaction, and morphology of resulted nanocomposite particles showed a dependence on the amount of the surfactant. Zeta potential measurements confirmed that the DM was located at the surface of the nanocomposites particles. Thermogravimeteric analysis indicated a relationship between the composition of polymer shell and polymer content of the nanocomposites. The nanocomposites were also characterized by FTIR and differential scanning calorimetry techniques. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Kinetics study of Ti[O(CH2)4OCHCH2]4 initiated ring‐opening polymerization of ε‐caprolactone by differential scanning calorimetry

Chemical shrinkage was used for the in situ measurement of the progressing chemical stabilization reactions and the influence of ozone during the stabilization of polyacrylonitrile. A method for evaluating the activation energy through the sensitivity temperature is presented. The calculated results show that the activation energies were 161.57 kJ/mol in air and 181.23 kJ/mol in ozone-enriched air. Therefore, the chemical reactions were postponed during stabilization in ozone-enriched air. Ozone seemed to act in three ways: first, ozone promoted the formation of the serious skin–core structure. Second, ozone accelerated the chemical reactions and shortened the stabilization time at lower heating rates. Third, ozone postponed the chemical reactions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Maghnite‐H+, a solid catalyst for the cationic polymerization of α‐methylstyrene

The polymerization of α‐methylstyrene (AMS) catalyzed by Maghnite‐H⁺ (Mag‐H) was investigated. Mag‐H is a montmorillonite sheet silicate clay, exchanged with protons. It was found that the cationic polymerization of AMS is initiated by Mag‐H at ambient temperature in bulk and in solution. The effect of the amount of Mag‐H, the temperature, and the solvent was studied. The polymerization rate increased with increase in the temperature and the proportion of catalyst, and it was larger in nonpolar solvents. These results indicated the cationic nature of the polymerization. It may be suggested that the polymerization is initiated by proton addition to monomer from Mag‐H. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polymerization strategies to overcome limiting monomer conversion in silicone-acrylic miniemulsion polymerization

The limiting conversion phenomenon observed in high solid content silicone-modified acrylic miniemulsion polymerizations was investigated. It was found that the limiting conversion was mainly due to the formation of inactive radicals upon propagation of butyl acrylate radicals with the vinyl end groups of the polydimethylsiloxane. Polymerization strategies that allowed overcoming this problem and achieving high monomer conversion were implemented.     

间歇式液相本体聚丙烯装置计算机控制与管理系统

介绍一种间歇式液相本体聚丙烯装置计算机先进控制与管理系统。它是由“基本控制层”和“上位控制层”构成的经济适用型集散控制装置。该装置采用了多屏显示技术、网络通讯技术、PLC程控技术、ActiveX控件技术和面向对象程序设计方法、数据库技术以及闭环辩识、预测控制、反应优化、底层PID控制与上层先进控制无扰动自动切换等多种技术和控制方式，因而可以灵活有效地实现聚合反应的全过程自动化生产和安全保护。     

块体纳米材料的结构性能及应用

块体纳米材料是纳米材料的重要组成部分，对纳米材料最终能否在大范围应用可能起着决定性作用。块体纳米材料具有很多比较特殊的结构和性能，这些特点决定了纳米材料的应用范围。文章对块体纳米材料的结构、性能和应用情况作了简要介绍。     

Polymerization behavior and polymer properties of eosin-mediated surface modification reactions

Surface modification by surface-mediated polymerization necessitates control of the grafted polymer film thicknesses to achieve the desired property changes. Here, a microarray format is used to assess a range of reaction conditions and formulations rapidly in regards to the film thicknesses achieved and the polymerization behavior. Monomer formulations initiated by eosin conjugates with varying concentrations of poly(ethylene glycol) diacrylate (PEGDA), N-methyldiethanolamine (MDEA), and 1-vinyl-2-pyrrolidone (VP) were evaluated. Acrylamide with MDEA or ascorbic acid as a coinitiator was also investigated. The best formulation was found to be 40 wt% acrylamide with MDEA which yielded four to eightfold thicker films (maximum polymer thickness increased from 180 nm to 1420 nm) and generated visible films from fivefold lower eosin surface densities (2.8 versus 14 eosins/μm²) compared to a corresponding PEGDA formulation. Using a microarray format to assess multiple initiator surface densities enabled facile identification of a monomer formulation that yields the desired polymer properties and polymerization behavior across the requisite range of initiator surface densities.